• Movie Studio

  23 answers, most recent on 10/3/2021

  RE: Non-standard Export Frame Rate in MP4.
  @Richard-Curtis Hi Richard. I have found over time that sometimes a work flow method that did not work previously will sometimes work better in a new program or worse depending on what has been done internally to the software and how capable the
• Movie Studio

  6 answers, most recent on 9/19/2021

  RE: How to 2x or 3x Speed of playback easily?
  @VideoPro Yes, it has some cracks and pops on my laptop, but I don't find voice indistinguishable at 1.25x or even at 2x. It may be a question of equipment, settings, project complications, version of MEP and OS. Maybe someone else has a solution
• Video Pro X

  13 answers, most recent on 9/9/2021

  RE: Renders play back on half speed
  @daydreamer11 Hi. Any lowering of the frame rate should allow for each frame to be exposed for longer. If the additional light is enough then the camera can use a lower ISO value and produce a less grainy and sharper images. So anything is worth a
• Movie Studio

  47 answers, most recent on 9/28/2024

  RE: chroma key: how to get rid of green or grey fringe around the subject
  @CubeAce, @kate-m Hi . . . . I think (hope) a mutual respect for the others point of view.  . . . . Very much so. We are both in agreement about the need to use the right tool for the job, and are looking at the problem from both sides with respect
• Video Pro X

  122 answers, most recent on 11/21/2021

  RE: Proposed new computer specs for using VPX
  @browj2 Hi John Some EVGA PSUs are equipped with a feature called "Auto-Eco Mode" whereby the fan will only activate if the PSU gets hot enough. This is distinct from other EVGA PSUs with (manual) Eco Mode, which have a switch to manually enable or
• Off topic

  3 answers, most recent on 4/20/2022

  RE: Hardware Advice And Direction
  @CLINT-DANBURY This article may be of use to you covering your list of items here. Stephen Forum Moderator  
• Movie Studio

  47 answers, most recent on 9/28/2024

  RE: chroma key: how to get rid of green or grey fringe around the subject
  @kate-m Hi Kate. The Sony Alpha II is a full frame camera and good at both stills and video. The problem for video is it is it being full frame. Meaning that compared to an APS-C sized sensor (the next sized sensor down for Digital interchangeable
• Movie Studio

  17 answers, most recent on 8/31/2021

  RE: how to edit/ trim within a frame/ smaller than a frame / incrementally
  @kate-m Hi Kate, and welcome to the user to user forums. A frame is a fixed time dependent on the amount of frames per second a video or film clip is recorded at. It is not divisible as a time period and although technically a sound track could be
• Movie Studio

  17 answers, most recent on 8/31/2021

  RE: how to edit/ trim within a frame/ smaller than a frame / incrementally
  @CubeAce Hi Ray, Please don't try to make the feature do more than was intended. As per the manual, a mixdown creates a stereo wave file, "optimized" meaning normalized. It normalizes the result, not the audio of each object as you seem to imply.
• Movie Studio

  17 answers, most recent on 8/31/2021

  RE: how to edit/ trim within a frame/ smaller than a frame / incrementally
  @kate-m Hi Kate, and welcome to the user to user forums. A frame is a fixed time dependent on the amount of frames per second a video or film clip is recorded at. It is not divisible as a time period and although technically a sound track could be
• Movie Studio

  25 answers, most recent on 8/10/2021

  RE: Moving on from MEP 13
  @Reyfox Hi. the Adobe image you added to your post is not for Adobe Premiere, but is for VR system requirements. Look again at the top of that page. Actually, no. Look at the top of the page and use the blue links to get to the correct boxes. What
• SOUND FORGE

  2 answers, most recent on 7/29/2021

  Soundforge 13 No data to the recording, no sound from speakers
  I am trying to record cassettes on Soundforge via a US equipped cassette deck, using Windows 10. I have used it before in Audacity, with good results. When audacity did not record, I tried it on my Soundforge 13. Same result - no data goes in, no
• Movie Studio

  5 answers, most recent on 7/27/2021

  RE: Cant run it on Macbook
  @Ron-Bretz Hi, And why would you buy it without trying it first to see if it runs on your equipment? There is a trial version.
• Video Pro X

  14 answers, most recent on 7/25/2021

  RE: Throw out every line of code in VPX13 and start again - here's why.
  Regarding a couple of things mentioned. I have VPX12 and Vegas Post 18. Was using just Vegas Pro but just upgraded to Post.First on pricing. No Magix VPX is NOT priced for the pro market, but the prosumer market. You need to compare the pricing to
• Video Pro X

  218 answers, most recent on 9/16/2021

  RE: [RELEASE] Video Pro X13 – SIMPLY HIGH END.
  @johnebaker Hi John. Ye,I had never noticed that in VPX. Not all of those options are available in MEP where I had looked at it previously. Have now checked with VPX 11. 👍 While I don't disagree that different systems may well need different
• Movie Studio

  20 answers, most recent on 7/19/2021

  RE: Windows 11 upgrade
  Thank you so much. I have heaps of media software along with home recording equipment and like you said the companies have not replied to my request for compliance information. There is a You tube that addressed the TPM.2 issue and it said that by
• ACID

  53 answers, most recent on 6/29/2021

  RE: ACID Pro 10 - public beta for update-patch is available (10.0.2.20)
  I have an issue, not really with this beta but with acid pro 10, I CANNOT seem to get my set up to work... It worked for years with no problem, everything is set up correctly... It worked on acid pro 7.. it worked on acid pro 8.. but somehow won't
• Video Pro X

  4 answers, most recent on 6/28/2021

  Lost Upper Toolbar
  I have lost the upper toolbar on VPX12 V18.0.1.95 possibly after a windows update. Have read of same problem in the forum. F9 does not restore it. I have managed to save project (Ctrl S) and exit program (alt F4) Equipment details are :- Dell Laptop
• Other products

  One answer, on 6/17/2021

  license limit
  I changed my computer and I can't register the new equipment
• Movie Studio

  9 answers, most recent on 6/16/2021

  RE: No video in editing monitor
  @Robert-Jeffree @Joey-Thrash Hi Robert. An awful lot of what can be done within Windows or some other operating systems comes down to if you happen to have supplied codecs, or sometimes drivers, either from the manufacturer of the newly introduced
• Movie Studio

  16 answers, most recent on 6/14/2021

  RE: Bugging the hell out of me!! Adding any Title templates 3D
  Hi Davy. It is normally important to keep graphics drivers up to date along with Windows updates (although sometimes it doesn't always improve things or introduces unforeseen problems.) With nvidia that would be the Studio driver not the Game driver
• SOUND FORGE

  One answer, on 2/16/2022

  Sound Forge with JLCooper Media Control Station 2
  Hi everybody, recently I acquired a JLCooper Media Control Station 2 (1997, made by iron, a small heavy controller ), what special is it with midi interface, yes MIDI, no RS-422 nor RS-232, so it means it is able to work with computer. A midi Media
• Video Pro X

  28 answers, most recent on 5/9/2021

  RE: 100% Hang while Exporting 4K Video, Regardless of CODEC
  @Wayne-McIlvaine Hi Wayne. My take on your questions. Other opinions may vary. 1: I have no problems exporting HEVC material to YouTube and getting the encoder at that end to use VP9. 2: Depends. Can you see a difference? No two people have the
• Samplitude

  8 answers, most recent on 4/22/2021

  RE: Samplitude sync from psrsx900 keyboard.
  Finally got 3 tech support messages. One said got your request, Second was in German, replied I don't speak German and third was that they could not duplicate the problem. There was no request asking about my system config, set up or equipment. Must