• Movie Studio

  4 answers, most recent on 1/27/2025

  RE: Movie Studio 2023 export to MP4 file
  Thanks for the suggestion. I tried that and it still didn't work. There are only certain video pieces this is impacting. Those where the aspect ratio is 16:9 don't export with the fade ins and outs. The ones I have where it's less than 16:9 (eg.
• Video Pro X

  62 answers, most recent on 5/15/2025

  RE: Should I choose Video Pro X or Vegas Pro?
  @Can-Dive My bad. I was going by the reply from @johnebaker without checking the Canon site. You are correct, it is Dolby stereo. It's just I have dabbled with 5.1 surround for my own amusement and have used the WMV format for exporting. WMV colour
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  @Robert-Verwey Hi . . . . To make it work I have set export to the UHD 770 and in the advanced encoder settings "multi GPU". . . . Unfortunately for @BrenyC this is not an option, Brendans Intel processor, the i5 processor 14400F does not have an
• Movie Studio

  6 answers, most recent on 12/13/2024

  RE: Reading a HDP format
  I exported the file from Magix Movie Studio 2023. The video was imported as an MP4 file cropped and rotated and then exported as a MP4. I ended up with a MP4.HDP file that a lot of people are asking about on-line as there doesn't seem to be any easy
• Movie Studio

  6 answers, most recent on 12/13/2024

  RE: Reading a HDP format
  @MonsterCarp Hi . . . . MP4.HDP file . . . . The .HDP is one of 2 support files, the other is the .H0 file, created by the program when you import a video clip. . . . . saved it as a MP4 file . . . . Do you mean saved or exported, if saved then you
• Movie Studio

  16 answers, most recent on 2/25/2025

  RE: ProRes422 question
  @CONRADO-CORTEZ You could try using Shutter Encoder (free) to convert your MS export to ProRes 422.
• Movie Studio

  3 answers, most recent on 1/29/2024

  RE: [Solved] Silent audio plays before looping
  @Doug-Burck Doug, if the audio is "hanging over" the end of your video object, then Magix will export to the end of the audio object, even though there is no video. To neatly finish the audio at the same time as the video, simply drag the right end
• Music Maker

  4 answers, most recent on 11/19/2024

  musi maker 2015 no more export facility at all
  i have never had trouble before exporting to mp3. now i have no expoprt facilities at all and the red guide bar does not track the music
• Movie Studio

  15 answers, most recent on 6/8/2025

  RE: Export results not accurate to settings.
  Yeah, I'll just have to put a sticky note on my monitor or something that reminds me that is really the headache button and not the export button lol. Thanks again.
• Movie Studio

  22 answers, most recent on 4/9/2026

  RE: MS re-names every new import to the name of the last saved project!
  I don't ever start projects in Magix.I simply just drag n drop already edited video-files into the timeline, to colour-grade them via Magix, then export them.*The project I previously saved was just a 1-off occurence | As I never normally use the
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  Yes, and I am doing the export from VD of sections to edit, but even then the import is a problem for stills. They need to be adjusted for proper output, but what you see in the video window is not what ends up being exported for stills. So there is
• Movie Studio

  5 answers, most recent on 3/11/2025

  RE: Crackling/popping noises in exported video audio
  Hi and welcome to the user to user forums. First, make sure the volume isn't clipping for the output by turning on the limiter on the output volume slider of the audio mixer. Internally the volume will not clip when played but could be too hot for
• Movie Studio

  5 answers, most recent on 6/5/2026

  video deluxe - video export are setting stored anywhere ?
  I had a working export using my graphic card but i wanted to create a video in a smaller size on output but after output i had all sorts of issues so i tried to put my export setting back and now export just aborts i can do a software render bu it
• Photostory

  3 answers, most recent on 5/20/2024

  RE: [Solved] Mixing down issue
  Hello, thank you for your response. I finally figured out what was causing the certain videos in my slideshow to look cropped. Some of the videos orientations had to be rotated 3 times to be upright. I realized that all 5 of the videos that had the
• Video Pro X

  62 answers, most recent on 5/15/2025

  RE: Should I choose Video Pro X or Vegas Pro?
  ericlnz. Please tell what settings you use when you export .m2ts from Vegas Pro @ghijohansson I've replied on the Vegas forum.
• Video Pro X

  11 answers, most recent on 1/10/2024

  RE: [Solved] Program refuses to make chapter menus.
  @Willem-vdfdeJong Hi . . . . running the trial for Video Pro X15 . . . . Do note that trial versions have a limited export/rendering duration of 3 mins. If your projects are longer than 3 mins, you should be getting a warning message that only the
• Movie Studio

  7 answers, most recent on 11/25/2024

  RE: [Solved] Text outside of the frame
  @Amir-Kashif  Go to - File - Settings - Movie (or click E on the keyboard) This window will pop up showing your Project settings, The Export Movie settings should match, they're normally auto set but if not you can type them in or use the
• Photostory

  19 answers, most recent on 12/22/2024

  RE: Can't understand advice given by support team
  @JANET-NICOLAS Hi Pleased to hear you have got the export done. There is one time when you may get the message about blank areas and yet visually there is nothing wrong with the playback in program or the exported video. As you can see above 2
• Movie Studio

  7 answers, most recent on 11/8/2024

  Export Error
  Trying to export video and it doesn't matter what format I choose I always get the same error code: copy to export adapter. It will export the first clip in the video fine but then I have a still image as the next clip. This is where the error code
• Movie Studio

  7 answers, most recent on 9/4/2025

  RE: Video playback stutters
  Thank you so much! It's not stuttering anymore, I changed the files into H.264. Now i want to know how i export videos in 3840 x 2160... I think i need to update VDL because the option isn't there. How can i do that?
• Movie Studio

  20 answers, most recent on 1/13/2025

  RE: Exporting to mp4 desyncs the sound...
  After I export to mp4 and it plays in windows media player, the sound is behind by several seconds. I knew what the OP was meaning when I read that. The Export command is, after all, "MPEG4". Re variable frame rates, the video was in sync on the
• Music Maker

  3 answers, most recent on 12/2/2024

  Unable to export
  When trying to export a completed song I am unable to do so. When the process of normalizing ends the program crashes (at the Mixing Down stage). The error report indicates that it is an access Access Violation.
• Movie Studio

  6 answers, most recent on 4/27/2025

  RE: Encoding Locks Up
  @john-x there's something about the project that MS doesn't like..... I agree, so try the steps I suggested earlier, i.e., remove everything which is on the timeline at the approximate time-point where the export fails. And also give us the
• Movie Studio

  10 answers, most recent on 12/2/2023

  RE: [Solved] Magix Video deluxe plus 2021 keeps crashing as it fills up my RAM
  SOLUTION: Go to settings and Change video mode to Alterante mode 2 (Video Mixing Renderer 9). With that MVD does not overload the RAM and crash all the time. Also turn of hardware acceleration for exporting.