• Movie Studio

  272 answers, most recent on 4/1/2021

  RE: Movie Edit Pro 2021 is out - New features
  @Scenestealer @browj2 @pmikep Hi Guys. As I said. I can confirm the project has corrupted. It is missing several instructions as to how to handle files on three tracks. The files are in the project and display correctly outside of MEP and you can
• Movie Studio

  13 answers, most recent on 8/23/2020

  RE: New User Here and I Have Some Questions Regarding the Timeline Tracks
  @ericlnz Hi Eric, Both Vegas and MEP/VPX (and all others) should have adopted the same scheme - Track 1 at the bottom of the screen, 2 above it, etc. MEP doesn't have the media pane, but VPX does - the Project Temp Folder (PTF). See this one and
• Music Maker

  6 answers, most recent on 1/11/2022

  music maker plus doesn't recognise my store content and crashes
  every time i load the Magix music maker plus (64bit) software i have to reinstall my content every time i load up. all my features vsts sound pools plus your own store content wont show up i have several packages(listed in part below) all of them
• Music Maker

  One answer, on 8/9/2020

  RE: Support for using hardware synth (Kurzweil PC3LE)
  I try to find this feature in different contemporary DAWs, Musik Maker too. It takes time just to find out if that is possible. Nor the help is not useful at all, nor the online support. I succeeded to put my H/w synth in the Music Maker MIDI setup
• Movie Studio

  28 answers, most recent on 8/1/2020

  RE: Black area
  @derek-williams @johnebaker First apologies. I have tried to copy John CB into this reply but it is not taking. Hi Derek. The video is showing fine at my end. No-one is in a rush here although I notice in your images you supplied for John EB there
• ACID

  2 answers, most recent on 8/6/2020

  Technical support fails to answer support requests
  In the last few months we have had our first experience of MAGIX sales and support. And from the first moment the experience has not been good. The main issue, hence this post, is the failure to respond to technical support issues. Since upgrading
• Movie Studio

  14 answers, most recent on 7/20/2020

  RE: Time line channels and controls
  @grahamm7 Hi Graham. The tracks are only locked if they show a padlock on them. To import a clip to a selected track to where you want it, do the following. A clip on a higher the track number is the one that is going to show, effectively
• Samplitude

  No answers, created on 7/12/2020

  Can't record MIDI, even though there is input signal
  Hi all, I am using Samplitude X2 Pro Silver In the past I have been able to record MIDI from my Roland Keyboard+Synth without any issue, but now for some reason it won't record MIDI input. I feel like I'm going crazy... I can't figure out why, but
• Movie Studio

  4 answers, most recent on 7/15/2020

  Why isn't apply transition to all objects in the track 2 working?
  Magix Movie Edit Pro Plus 2020 Apply transition to all objects in the track isn't working in the 2nd track, I put a background image on track 1, then placed several images on track 2 & applied a rolling transition as if the photos were being
• Movie Studio

  18 answers, most recent on 6/14/2020

  RE: Magix Bug with Gopro Hero 7 videos filmed upside down
  @AAProds @johnebaker @ovisopa Hi AA. Yes he did it deliberately, read his post. Hi Ovisopa. Yes I've exported as HEVC, MPEG-4 and AVI. All were OK. Longest conversion took 17 secs. I wonder if you have other video codecs on your machine other than
• Movie Studio

  118 answers, most recent on 6/12/2020

  RE: Masks and the use of the Chroma Key Enquiry.
  @browj2 @terrypin @johnebaker Good morning everyone. Hi John CB. I 100% agree with you and the problem for me was also present in my TANKS project, hence the need to produce a thin black line around my text and why I said in my second reply on this
• Movie Studio

  118 answers, most recent on 6/12/2020

  RE: Masks and the use of the Chroma Key Enquiry.
  Here is how I did it. In BluffTitler (BT), set up the Bluff text with mask effect and picture as texture In BT, added 2020 text, keyframed movements Exported just the BT text with mask effect and picture texture as transparent avi Removed the mask
• Music Maker

  17 answers, most recent on 5/8/2020

  RE: Unable to record
  Here are my settings. Something I noticed is even though I hear my instrument as I play there is no activity on the track showing sound and the Indicators do not move. There is the word "pitch" just above the instruments that flashes a little every
• Movie Studio

  29 answers, most recent on 4/9/2020

  RE: Phantom audio "track" or some audio remnant.
  @johnebaker Hi John. I don't know why you are showing me that portion of the screen and you won't see any difference until you take away some of the project files while the proxy rendering is in place. Whereupon you still won't see any difference as
• Movie Studio

  29 answers, most recent on 4/9/2020

  RE: Phantom audio "track" or some audio remnant.
  @FF22 That is indeed strange. Start with what John EB suggested. If that doesn't work, then do as Ray suggested, drag the volume slider for track 1 in the mixer to the bottom to turn it off. John CB Been there, done that. The Mixer has no impact
• Movie Studio

  29 answers, most recent on 4/9/2020

  RE: Phantom audio "track" or some audio remnant.
  @FF22 Try this. It may work. Tell us if it doesn't. Click on image to enlarge. Click on outer section of page to exit. Ray.   I may not understand. What "image to enlarge" do I click on? But I picked a "still" image (where the audio is playing
• Music Maker

  14 answers, most recent on 3/31/2020

  RE: Nectar plugin disappeared after update
  Hello and thank you so much.I have the premium version.I have tried re scanning the vst folder a few times and it doesn't help,seems like it might be stuck,I try to re set it to a different folder,and it makes no difference,same plugins are
• Audio Cleaning Lab

  3 answers, most recent on 3/29/2020

  RE: Magix Xtreme Print Studio
  I am having the same error when trying to open the Xtreme print studio from the Audio Cleaning Lab 2. I had my VIP project completed with tracks, and thought it would be handy to open the print studio for a quick CD cover. Xtreme Print Studio tries
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @pmikep Hi Mike It's amazing what I can forget to add in the way of information after three days of testing where I hadn't made notes of everything along the way. I have not heard of jumpshare but have looked at it. I will evaluate it and let you
• Movie Studio

  28 answers, most recent on 5/7/2020

  RE: How to load saved 'video effects / facial bluring' onto a new video??
  I did that, however it doesn't work... :/The effects show on the lower track on new timeline, but don't actually perform their function (or in other words they don't actually add any effects to the footage in the track above them).Tried to 'group'
• SOUND FORGE

  5 answers, most recent on 2/9/2020

  Track EQ, compressor, and noise gate
  I upgraded from SF10 (build 491)/Win7 to SF13 (64 bit build 131)/Win10 and recently decided to reinstall SF10 (build 507) to get access to a few features that I miss from SF10. The track EQ, track compressor and track noise gate plug-ins were
• Video Pro X

  20 answers, most recent on 1/31/2020

  RE: VPX11 17.0.3.63 More Bugs - Moving Cut Point, Object Trimmer Problems
  @johnebaker Hi John, Thanks for taking a look. The bottom left controls allow you to nudge the left Object Border of the selected clip to the left and right on trimmed clips, the same as I showed in the other part for dragging the Object Border
• Video Pro X

  20 answers, most recent on 1/31/2020

  RE: VPX11 17.0.3.63 More Bugs - Moving Cut Point, Object Trimmer Problems
  @CubeAce Hi Ray, The problem is with Object Borders and moving them in different mouse modes, not moving object in different mouse modes. I think that you are referring to moving objects, not Object Borders, in different mouse modes. There is a
• ACID

  6 answers, most recent on 1/21/2020

  RE: Am I alone in thinking that MAGIX has bitten off mor than it can chew
  Hi All, I am new to MAGIX products and this may be the cause of the issues that I am having. I come from Ableton and Sonar but I wanted to know a bit more about ACID loops. ACID Loops are just Wave Audio Files with metadata chunks in them. One