• Movie Studio

  10 answers, most recent on 3/15/2025

  RE: Transition editing in Magix 2023
  @johnebaker Hi. The Smooth transitions, Slide right and Slide left transitions are the 3D Basic, Slide sideways 1 and Slide sideways 2 effects without the black bar. John EB Are you sure? The Slide transition has a gap between that is the black
• Movie Studio

  10 answers, most recent on 3/15/2025

  Transition editing in Magix 2023
  Can you edit the slide transition by removing the black bar between the two clips, or making your own slide transition and then save it Thanks
• Movie Studio

  5 answers, most recent on 7/20/2025

  MP4 problems
  All of a sudden I am having problems with mp4s. I load the videos I want to edit and, after about a minute, the video goes black and Im unable to see it. It will also render black....on others, the audio disappears, I hear a quick blip of audio at
• Movie Studio

  10 answers, most recent on 3/15/2025

  RE: Transition editing in Magix 2023
  @emmrecs Hi Jeff. I was thinking that @Tiempie-Lamprecht does have at least some of the templates as the normal transition 'slide' does have a black bar at it's edge. Ray.
• Movie Studio

  10 answers, most recent on 10/1/2024

  Customised Export but still black bars at top and bottom
  Whilst the ‘customised’ export of the attached clip has no black bars appearing on either side on the exported video, it does though have the black bars appearing at both top and bottom on the exported video. The short road movie clip that appears
• Video Pro X

  9 answers, most recent on 5/9/2025

  RE: Aligning
  @Iris-Willis Assuming VPX is the same as MMS... If your source video is 1920x1080, just set up a movie setting to match. 1920x1080 is the same ratio as UHD, 3840x2160, which is what all TVs are. (note this is NOT "4K" even though many ads for big
• Movie Studio

  6 answers, most recent on 4/25/2025

  RE: Portrait oriented footage stretched.
  @Mauricio-flores Magix doesn't recognise 9:16 portrait clips when dragged in, ie the project stays at 16:9 landscape when media is added. The fact your video is being stretched says that your project is 16:9 landscape which doesn't match you
• Movie Studio

  10 answers, most recent on 3/15/2025

  RE: Transition editing in Magix 2023
  @CubeAce Hi, I believe the request is about the Slide sideways transition & @Tiempie-Lamprecht no you can't remove the black bar. Edit, @CubeAce you posted while I was typing 👍 ----------- @johnebaker I don't think this 'push' type transition
• Movie Studio

  25 answers, most recent on 10/8/2025

  RE: Issues with MAGIX Video deluxe 2026 Plus
  @DarkWestern Number two, all my movies have a ridiculous amount of black video at the end. If I edit a 10 minute video, it always comes out with 3~5 minutes of black void at the end, and yes I have painstakingly gone through every second of the
• Movie Studio

  19 answers, most recent on 7/22/2024

  [Solved] Video gets distorted when opened in Movie Studio 2023
  Hi. I would like to edit an mp4 file Ratio 1:1 (720x720). I start a new project - social media - square 1:1. When I open the video it gets distorted. I seems to have a black bar on the top and bottom. How can I fix this? Thank you!
• Video Pro X

  44 answers, most recent on 2/4/2025

  RE: Problem with exported DVD
  @emmrecs Not sure about the "scissors"??? Sorry Jeff, me being cryptic. I'd be using the Section effect to get rid of all the black bars and side crud. I can't tell if the actual video area should be 4:3; when it's imported as an overall 4:3 frame,
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  @clement5 When exporting a standard 720x480 NTSC video with 4:3 aspect ratio, the result is a letterboxed video Once you've opened it for editing, the "NTSC" becomes irrelevant. It's just a set of numbers. I get no black bars on any edge when
• Movie Studio

  16 answers, most recent on 2/25/2026

  RE: Can't get Red Text
  @KJS-LES Hi . . . . Please note that the color in the Text selection box is MUCH REDDER than it looks here. . . . color in the screenshots, as you see, is what I see see in Irfanview and Photoshop . . . . Does this mean you see the colour issue only
• Movie Studio

  69 answers, most recent on 4/9/2024

  RE: VHS captures, video "washed-out"
  @AAProds, Thanks for providing the uncropped interlaced Lagarith sample. It allowed me to play with the video in VirtualDub, cropping the 2 black bars that are associated with every analog capture and bringing it into MMS 2024 and noting that even
• Movie Studio

  10 answers, most recent on 3/15/2025

  RE: Transition editing in Magix 2023
  @Gid, @CubeAce Hi Gid, Ray . . . . . I don't think this 'push' type transition effect can be recreated & saved as it requires the movement of both images/objects. ? . . . . Agreed the all transition effects that move the actual video/images,
• Rescue Your Videotapes!

  7 answers, most recent on 12/19/2025

  RE: Lines in digitized VHS
  @MovieEditorr Maybe next model of MAGIX Video Saver should include signal booster? This could be accomplished with two USB cables, one for power and one USB 3.0 for data transfer. It's not really a function of low signal. It's just the nature of
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  It was made from a 720x480 4:3 DVD which was apparently lifted from a VHS tape likely of a broadcast, but may have been a dub from a 16mm film. As to the specs for the original film it is "The Leathernecks have Landed" which can be researched on
• Movie Studio

  69 answers, most recent on 4/9/2024

  RE: VHS captures, video "washed-out"
  @AAProds  It comes in as 1.0000 (Square), You can change the Pixel aspect to 0.9091 (NTSC DV)so it looks like what MMS shows with the black bars. I'll try your other vid in a bit, I use MagicYUV as a render option & have no prob in Vegas, I
• Movie Studio

  12 answers, most recent on 1/7/2024

  RE: Fill Vertical video from cellphone with blur background
  @browj2Hi, to be honest apart from playing around with it I've never used Slideshow in 20yrs (or however long it's been in Magix) & the black bar template i made a long time ago was just for the odd clip I had, I also use Vegas more now which
• Movie Studio

  69 answers, most recent on 4/9/2024

  RE: VHS captures, video "washed-out"
  Hi @browj2Great to see you had success with the Startech. Just curious if it uses a generic driver; What is it called in Device Manager?  Thanks for conducting the capture test in both MMS and VXP. Interesting result. It contradicts both @RGBguy and
• Movie Studio

  7 answers, most recent on 12/4/2023

  RE: [Solved] Drag and drop from Edit/Preview window only works sometimes
  @Ian-Schwartz Hi, In your image, is that a preview from the Media or is that the clip on the timeline? In MEP2022, if it's the preview from the Media pool and you have put trim in/out points, dragging from the preview window works. However, if you
• Photostory

  4 answers, most recent on 9/10/2024

  RE: Crop to Fit Monitor
  @Todd-Nebel Hello Todd, .....Some photos after export have heads and body parts cut out of the photo..... This is because you have set all the photos to 16:9 with Fill Image (Shift+A). The solution could be to select all the photos with Ctrl+A and
• Movie Studio

  45 answers, most recent on 11/29/2023

  RE: Which version supports 4k video editing
  @derek-brown Looking at 4k vs UHD, from what I can see, if UHD is exported as 4k, the picture is squashed horizontally in VLC Player and Virtual Dub. The image, when set to the height that shows no top/bottom bars, shows the sides well padded with
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  @clement5 There is a porthole at 3:30 that can be used to sort out the aspect. As I said previously, I think it's 4:3 provided the image is stretched horizontally to fit a 4:3 frame. As discussed, it's actually only 1.33 to 1 due to the known AVI