Video Deluxe Premium 2027

andrew-m2370 wrote on 11/3/2026, 1:07 AM

I purchased the Premium version and also the Neat plugin in order to process family movies (Std 8mm 16fps and Super 8mm 18fps scanned by am Kodak Reels digitiser to mp4/h.264 at 1600x1200 and native frame rate).
The package works well but I'm disappointed that I'm unable to save the results directly to mp4 within Magix.
To achieve the desired result, I must first export to AVI (which allows the correct fps) and then convert the AVI to MP4 externally (using ffmpeg).
I wish that Magix Video Deluxe would allow me to do this directly to MP4 with 16 or 18fps. It currently only accepts 24,25,etc fps. Surely it would be a minor change to allow these film native frame rates.

Magix Video Deluxe 2027 Premium with Neat plugin running on Asus ProART P16 (H7606WW) Windows 11 Pro

Comments

emmrecs wrote on 11/3/2026, 4:19 AM

@andrew-m2370

Welcome to the Magix user to user forums.

Since there are no Magix staff who regularly visit or post here I fear your comment is unlikely to be seen by anyone who can effect any change in the software, sorry.

However, I do agree it is somewhat "silly" that it is possible to type a different frame rate into the Export screen, but this is immediately ignored and the setting reverts to whatever figure was previously in that box!

I know @browj2 does/has done quite a lot of transfers from 8mm film to digital so I've tagged him in this post so that he sees it and may be able to offer suggestions to you.

If you wish to make a request to Magix that they consider this feature for a future release you should send an email to infoservice@magix.net detailing what you would like to see added to the sfotware.

HTH

Jeff
Forum Moderator

Win 11 Pro 64 bit, Intel i7 14700, 32 GB RAM, NVidia RTX 4060 and Intel UHD770 Graphics, Audient EVO 16 audio interface, VPX, MEP, Music Maker, Vegas Pro, PhotoStory Deluxe, Xara 3D Maker 7, Samplitude Pro X7 Suite, Reaper, Adobe Audition CC, 2 x Canon HG10 cameras, 1 x Canon EOS 600D, Akaso EK7000 Pro Action Cam

AAProds wrote on 11/3/2026, 4:19 AM

@browj2

John, does VPX export at frame rates below 20 eg 16, 18?

All my forum comments are based on or refer to my System 1.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

System 3

Lenovo Yoga laptop

Windows 11

CPU i5-8250U (1,6ghz)

8GB DDR4 2400 RAM

GPU iGPU UHD620

2TB NVME HDD

Video Deluxe 2026

emmrecs wrote on 11/3/2026, 5:24 AM

@AAProds

Hi Al,

does VPX export at frame rates below 20 eg 16, 18?

On my initial, very quick check, no. VPX18 behaves exactly as VdL 2027 does, at least with mp4 exports. (Haven't checked any other output formats.)

Win 11 Pro 64 bit, Intel i7 14700, 32 GB RAM, NVidia RTX 4060 and Intel UHD770 Graphics, Audient EVO 16 audio interface, VPX, MEP, Music Maker, Vegas Pro, PhotoStory Deluxe, Xara 3D Maker 7, Samplitude Pro X7 Suite, Reaper, Adobe Audition CC, 2 x Canon HG10 cameras, 1 x Canon EOS 600D, Akaso EK7000 Pro Action Cam

AAProds wrote on 11/3/2026, 6:29 AM

@emmrecs

Thanks Jeff.

All my forum comments are based on or refer to my System 1.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

System 3

Lenovo Yoga laptop

Windows 11

CPU i5-8250U (1,6ghz)

8GB DDR4 2400 RAM

GPU iGPU UHD620

2TB NVME HDD

Video Deluxe 2026

johnebaker wrote on 11/3/2026, 10:29 AM

@AAProds, @andrew-m2370

Hi Al, Andrew

. . . . does VPX export at frame rates below 20 eg 16, 18 ? . . . .

Different John -- no, for MP4 (h.264 encoding) the minimum is 24 fps.

In my testing with VDL 2027, I can see no difference between the original 16 fps source video and exported at 24 fps or higher the amount of 'judder' is still the same..

To get lower framerates you need to export as AVI, WMV, or AV1 (AV one). All offer 7, 12, 15, 20 fps, however with a resolution above 1920 x 1080 I do get check resolution/framerate message.

John EB

Last changed by johnebaker on 11/3/2026, 10:30 AM, changed a total of 1 times.

VPX 17, Video deluxe 2026, and earlier versions MEP 2015 and 2016, Music Maker Premium 2026.

PC - running Windows 11 25H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 25H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

browj2 wrote on 11/3/2026, 12:37 PM

@andrew-m2370 @AAProds

Hi,

Glad to see someone else scanning their old 8mm and Super8 films. I haven't been playing around with my scanned films for quite a while; I must get back on it.

Just to confirm, no, VPX does not export to 16 or 18 fps.

I'll start with the end. We are going to be watching the output on a TV or a computer monitor, not playing back using an old projector, so use standard playback fps rates for your TV region, or at least close to it: 29.97 for NTS or even 30, or 25 fps for PAL. There is really no need for a 16 or 18 fps MP4 file; you should not be getting any judder, or at least not more than watching the original.

Andrew, nice machine. It has:

  • Image sensor: 8.08 megapixels (3280 x 2464) 1/3” CMOS sensor
  • Native resolution: 1296p

so the output is greater than 1080p, which is what the advert says. This allows for some cropping and zooming which is almost always necessary, without losing resolution. I often had the framing slightly off.

The above image has Neat Video applied to it - quickly, just for this post.

My Wolverine has

  • Scan Sensor: 3.53 MP 1/3" CMOS sensor
  • Resolution: 1080p at 20 fps

However, according to the manual, the Kodak Reels digitizer, like the Wolverine, creates a file at 20 fps for both 8 mm and Super8. You indicated that the output files are at the native frame rate, 16 and 18 fps. Are you sure about that?

What are your project movie settings? I have HDTV, 29.97, fullHD.

When you import the file onto the timeline, select it, and go to Effects, Video Effects, Speed and check the frame rate. Mine says 20 fps. For 8mm Standard film file, change the value to 16, for S8, change it to 18, enter. The duration of the clip on the timeline will be adjusted. The program inserts duplicate frames to compensate. Watch the result. Now go back to Speed, and check the box for Interpolate intermediate images. Watch the result. Decide which is best for you. I usually find that it is best left unchecked.

When you use Neat Video, you need to adjust for frames that have been added so that actual "adjacent frames" and not repeated frames are considered for temporal filtration. Under Filter Settings, I use high quality and increase the radius to 4 to make sure that the program is considering non-repeated frames. Read the information about Repeated frames. I usually set this to 30%. And so on. There is a usually lot of trial and error involved.

Since there was no in-camera stabilization, Mercalli stabilization is often needed.

Smooth playback in VDL is often not possible when effects, like Neat Video and Mercalli, are applied, so you may want to do intermediate exports to view the results. I have found that I had to export (to Magix mxv format) and use intermediates in order to further use effects, like exposure and colour correction, otherwise playback in the program became difficult.

Do you also have S8 with sound?

John CB

Last changed by browj2 on 11/3/2026, 12:38 PM, changed a total of 1 times.

John C.B.

VideoPro X(17U); Video Deluxe 2026 Plus, Movie Studio 2025 Platinum; PhotoStory Deluxe 2026; Music Maker 2026 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 11 Pro 24H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB, 12TB, 14TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

andrew-m2370 wrote on 11/3/2026, 9:44 PM

Hi John,

Thank you for your detailed response.

I have a Kodak Reels version D (ie 2025 model) and have modified the firmware as detailed in "Hacking the Kodak Reels 8mm Film Digitizer (New Thread) TinkerDifferent". The photo above for FW 272 shows all the parameters in use and most can be modified. This firmware allows me to adjust framing and zoom, as well as set the output frame rate to 16 and 18. I would need to rebuild the firmware to change from 1600x1200 so I'm staying with that. (There is different firmware for each of the Kodak Reels A,B,C or D.)

So yes I'm sure that I'm getting the native frame rate in the output. I'll keep these frame rates for archiving my scans, and have preferred to retain these in my processing. But this has required me to output to AVI for 16/18 fps and then use ffmpeg to convert to mp4.

I have scanned about 17 x 400' reels and a number of 50' reels, all silent. The results are so much better than my original efforts back in 1995 (projector, right angle light box with ground glass screen & Sony DV ... telecine I think it's called). However, some film is from late 1940's and has begun to deteriorate (colour hue going red/blue, breaks, many 'flash frames', dust and scratches). I'm getting good cleanup with Neat.

I haven't come across Mercalli, is it in VDL or is it an extra plugin?

Cheers,

Andrew Miller

AAProds wrote on 11/3/2026, 11:08 PM

@browj2

We are going to be watching the output on a TV or a computer monitor, not playing back using an old projector, so use standard playback fps rates for your TV region, or at least close to it: 29.97 for NTS or even 30, or 25 fps for PAL. There is really no need for a 16 or 18 fps MP4 file; you should not be getting any judder, or at least not more than watching the original.

John, my understanding is the best/smoothest display is at the original frame rate. As soon as you force a different frame rate, duplicates are required which by definition won't be evenly spaced and so extra jerkiness is introduced (unless you exactly doubled the frame rate, in which case the video would be as per the orignal). Whether "joe public" would notice is the question.

If you want to get your hands dirty, AVISynth does a good job in real frame interpolation:

 

All my forum comments are based on or refer to my System 1.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

System 3

Lenovo Yoga laptop

Windows 11

CPU i5-8250U (1,6ghz)

8GB DDR4 2400 RAM

GPU iGPU UHD620

2TB NVME HDD

Video Deluxe 2026

andrew-m2370 wrote on 11/3/2026, 11:53 PM

@AAProds

I had a good look at your example of interpolation... yes it seems a lot smoother in panning especially. If I chose to output at 24 fps, then the additional frames would be evenly placed (16 fps needs an extra frame after two originals, and 18 fps needs an extra frame after 3 originals). But this might not be as smooth as 50 fps. You mention 'AVISynth', whereas your example attributes 'Rife'. I'll have a bit of a google on those but do you know which is better.

Cheers

Andrew Miller

AAProds wrote on 11/4/2026, 12:51 AM

@andrew-m2370

Even though the dupe frames would be evenly spaced, they will introduce a slight jerk. Bring the exported video back into Magix and step through frame by frame; you'll see a pause after every two originals as the dupe is played.

RIFE is a plugin for AVISynth. I've got some detailed info on AVISynth and RIFE on my website here. Not for the faint-hearted but results are great.

FYI, that YT video I posted used RIFE to truly interpolate the frames: every frame is unique. RIFE takes two frames and creates a frame between them that is half and half (or whatever is needed by the frame rate you set it for). So the video runs for the same time, but contains more frames, hence it comes out smoother. You can step through the YT video with the comma and fullstop keys to observe that each frame is truly unique.

The upshot is that that YT is not simply sped up to 50fps as exported by Magix.

 

Last changed by AAProds on 11/4/2026, 12:51 AM, changed a total of 1 times.

All my forum comments are based on or refer to my System 1.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

System 3

Lenovo Yoga laptop

Windows 11

CPU i5-8250U (1,6ghz)

8GB DDR4 2400 RAM

GPU iGPU UHD620

2TB NVME HDD

Video Deluxe 2026

browj2 wrote on 11/4/2026, 10:44 AM

Great stuff guys!

@andrew-m2370

Andrew,

I looked up about the hacks for modifying the frame rates, etc. Really good as that simplifies one aspect, frame rate.

I would need to rebuild the firmware to change from 1600x1200 so I'm staying with that.

Definitely stay with the highest resolution that you can scan or close to it, and 1600x1200 is excellent.

What are your settings in VDL (Video Deluxe)? Are you setting the resolution to 1600x1200 or using a default setting of FullHD 1080?

proDAD Mercalli 6 - most of here have obtained this, usually as third party add-ons to VDL or VPX. I got V6 by purchasing VPX Ultimate. Look at the Magix.com web page and scroll down till you see Mercalli V6 and watch the video. Here is the link to the Mercalli page for the Magix plugin. This is a must-have.

@AAProds

Hi Al,

I can see the difference between your side-by-side videos about interpolating frames. Very good, but if one didn't see this side-by-side, would one really notice the difference in most cases? I guess that I should try it to see, but I find my results to be acceptable.

I like your comment on your site, "Those of you with an attention to detail ..." and interpolation is another detail in the process. However, there are many more. Andrew wasn't aware of Mercalli and for me, stabilization is much more important than the interpolation problem.

So, to be attentive to detail, I am using VPX which has much better exposure and colour correction tools. Even just having the scopes helps understand what the problems are and the effects of using the various tools available.

Here is the type of thing I am dealing with. The first video is a scene from an 8mm film, digitized at 20fps, changed to 16fps to correct the speed, in a project set to 29.97 fps.

Colours are way off, there is a lot of noise including dust/particles, picture is a bit blurry, and, being hand-held, the image is jerky, particularly towards the end.

Video below has Section effect applied to crop bad edges, Neat Video noise reduction (still having a problem with noise at the horizon - sky to water), exposure and colour correction, Mercalli V6 applied for stability. No frame interpolation, almost every frame is duplicated.

@andrew-m2370, Andrew, take note of the improvement by using Mercalli in this case.

Al, would frame interpolation help much?

Below is original along with the scopes:

Below is the modified version along with the scopes. Not perfect. Some blue is lacking and some of the highs are blown out.

Al, if I wanted to try RIFE with AVISynth, how would I handle getting the original from 20 fps to 16 then 30? Keep in mind that the 20 fps file contains all frames and needs a speed adjustment, not a reduction in frames.

John CB

Last changed by browj2 on 11/4/2026, 10:58 AM, changed a total of 4 times.

John C.B.

VideoPro X(17U); Video Deluxe 2026 Plus, Movie Studio 2025 Platinum; PhotoStory Deluxe 2026; Music Maker 2026 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 11 Pro 24H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB, 12TB, 14TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

AAProds wrote on 11/4/2026, 5:55 PM

@browj2

if one didn't see this side-by-side, would one really notice the difference in most cases?

John, true, but I now cringe when I see jerky, stuttery old cine film! 😁. A guy on the 8mm forum says he leaves it like that because it's authentic but I think that, because your eyes don't see that jerkiness in real life, it shouldn't be in the video. Maybe I'm hanging on too tight!

how would I handle getting the original from 20 fps to 16 then 30? Keep in mind that the 20 fps file contains all frames and needs a speed adjustment, not a reduction in frames.

To simply change the play speed, use AssumeFPS(16).

I wouldn't bother doing that though, just apply RIFE to the 20fps video.

I really must install VPX 16! 😂

All my forum comments are based on or refer to my System 1.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

System 3

Lenovo Yoga laptop

Windows 11

CPU i5-8250U (1,6ghz)

8GB DDR4 2400 RAM

GPU iGPU UHD620

2TB NVME HDD

Video Deluxe 2026

browj2 wrote on 11/5/2026, 11:58 AM

@AAProds

Hi Al,

To simply change the play speed, use AssumeFPS(16)

I wouldn't bother doing that though, just apply RIFE to the 20fps video.

I'm having trouble getting my old brain around that. Since the video file is 20fps but the correct speed is 16, the last 4 frames have to be in the second second. If I just apply RIFE to the 20 fps video to get it to 30 fps, then I would get 10 interpolated frames per second, would I not? And the speed would still be faster than what it is supposed to be. Bringing the 30 fps file at the wrong speed into VPX would require adjusting the Speed - stretching clip to get the right speed (too old to do the maths on this - by 4 frames?) thus adding in a few duplicate frames and leaving the possibility of flicker. If the file were actually 16 fps, then RIFE would interpolate 14 frames.

I really must install VPX 16! 

Definitely! I don't understand why you haven't been using it all along.

John CB

John C.B.

VideoPro X(17U); Video Deluxe 2026 Plus, Movie Studio 2025 Platinum; PhotoStory Deluxe 2026; Music Maker 2026 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 11 Pro 24H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB, 12TB, 14TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

johnebaker wrote on 11/5/2026, 2:34 PM

@AAProds

Hi Al

I can see where John CB is coming from.

Putting the question in another way.

Does running 20fps video through RIFE add creating the necessary intermediate frames to achieve 30 fps also change the file header framerate to 30 fps?

If not are you importing the RIFE output into VDL / VPX and adjusting, if necessary, to export at 30 fps?

To my mind RIFE can only create intermediate frames at multiples of 2x, 4x, 8x the orginal source video

John EB

Last changed by johnebaker on 11/5/2026, 2:38 PM, changed a total of 1 times.

VPX 17, Video deluxe 2026, and earlier versions MEP 2015 and 2016, Music Maker Premium 2026.

PC - running Windows 11 25H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 25H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

AAProds wrote on 11/5/2026, 7:53 PM

Here's an 18FPS file and a RIFE'd 50FPS file.

https://drive.google.com/file/d/1Nt4-Sff9gMP8ULovd81_KboDQ8o3td9j/view?usp=drive_link

If you put these onto a 50fps timeline, you'll see the interpolated frames in the 50fps video, and the dupes in the 18fps video. How RIFE does it, I don't know. In these examples, 50 isn't a neat 18x3 either.

@johnebaker

Does running 20fps video through RIFE add creating the necessary intermediate frames to achieve 30 fps also change the file header framerate to 30 fps?

I think so. On import to Magix, the files play for the correct time.

@browj2

John, can you send me a 20fps scan to play with?

 

All my forum comments are based on or refer to my System 1.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

System 3

Lenovo Yoga laptop

Windows 11

CPU i5-8250U (1,6ghz)

8GB DDR4 2400 RAM

GPU iGPU UHD620

2TB NVME HDD

Video Deluxe 2026

AAProds wrote on 11/5/2026, 11:43 PM

And here's a 25FPS RIFE file:

https://drive.google.com/file/d/1nyUiYM9zP7acRQNyRAlsxVOAMFb2_uh8/view?usp=drive_link

All my forum comments are based on or refer to my System 1.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

System 3

Lenovo Yoga laptop

Windows 11

CPU i5-8250U (1,6ghz)

8GB DDR4 2400 RAM

GPU iGPU UHD620

2TB NVME HDD

Video Deluxe 2026

browj2 wrote on 11/6/2026, 7:13 AM

@AAProds

HI Al,

I sent you a PM with the link to a file.

Thanks,

John CB

John C.B.

VideoPro X(17U); Video Deluxe 2026 Plus, Movie Studio 2025 Platinum; PhotoStory Deluxe 2026; Music Maker 2026 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 11 Pro 24H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB, 12TB, 14TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

Michael-Tester wrote on 11/8/2026, 10:39 AM

MAGIX Video deluxe 2027 Plus, will not install, keep getting error 1610. I've searched for a solution with out any luck, tried multiple suggestion, still will not install, it installed once, and worked, I then upgraded to Premium, thats when the problem started, What can I do ?

andrew-m2370 wrote on 11/8/2026, 8:05 PM

I uninstalled the plus version then used the installer for premium that was provided in the email from Magix (also included the serial number and info on how to download and install proDAD Hide v2). I had no problems on my ASUS ProArt P16 with Windows 11 Pro. Not sure whether this helps you.

Michael-Tester wrote on 11/9/2026, 10:20 AM

Sadly it does not help, I have already tried that, I hoping there support may help

johnebaker wrote on 11/9/2026, 11:42 AM

@Michael-Tester

Hi and welcome to the forum.

. . . . I've searched for a solution with out any luck . . . .

Did you find this Support article using the forum search feature which is available when you right click you avatar top right of the forum?

We often need more information to help diagnose the issue(s) you are having:

The specification of your computer system including Windows version and program version, see this topic for what is required and please quote processor and graphics card make/model in full, and also what monitor/screen resolution(s) you are working with if this is a laptop.

I would suggest you put this information in your profile signature so we do not have to keep asking for it.

John EB
Forum Moderator

 

 

Last changed by johnebaker on 11/9/2026, 11:45 AM, changed a total of 2 times.

VPX 17, Video deluxe 2026, and earlier versions MEP 2015 and 2016, Music Maker Premium 2026.

PC - running Windows 11 25H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 25H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

Michael-Tester wrote on 11/10/2026, 10:14 AM

Thanks for responding, I have tried multiple solutions, how ever the videodeluxe2027premium_dlm_egf6rl9.exe installer never completes and exits with the 1610 error. I am using Windows 11 Home 64-bit,
Computer type: Desktop, AMD Ryzen 3 3100, 16.0GB Dual-Channel DDR4 @ 1064MHz (15-15-15-36),  NVIDIA GeForce GTX 1650 SUPER 

johnebaker wrote on 11/11/2026, 3:26 AM

@Michael-Tester

Hi

. . . . videodeluxe2027premium_dlm_egf6rl9.exe installer never completes. . . .

This is the Download Manager that is failing and it has 4 possible failure points, at which point does it fail:-

  1. Launching of the Download Manager
  2. Initiating the download of the software installation file
  3. During the download of the software installation file
  4. Launching the software installer

In addition to the above another cause may be your Antivirus software 'Folder protection' feature may be blocking the installation.

John EB

VPX 17, Video deluxe 2026, and earlier versions MEP 2015 and 2016, Music Maker Premium 2026.

PC - running Windows 11 25H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 25H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

Michael-Tester wrote on 11/11/2026, 11:21 AM

Thanks for all your suggestions all of which I have tried, including removing all registry entries, an any files left on my pc. it still will not install, I've included some images that I hope help. Could that version of the installer be at fault. It always stalls when doing some thing to the file shown image below, is file already corrupt?