• Music Maker

  3 answers, most recent on 4/3/2026

  RE: Installation Gets Stuck
  "Windows Resource Protection did not find any integrity violations." Still same issue after following these commands. I also updated my windows to see if that would change anything (It didnot). I used to have 2022 premium model that I have recently
• Other products

  7 answers, most recent on 4/21/2026

  RE: Magic Audio & Music Lab is not finding my sound card
  @WilliamJ-Drake Hi What is your computer speification, in particular the processor, graphics card/chipset the sound card Make/Model, please quote the make and models in full. If the sound card is an external USB sound device does it playback audio
• Music Maker

  2 answers, most recent on 2/11/2026

  RE: I Need To Enhance MP3 Audio Files From LPs
  @Oka Suno pretty much sends them through an AI model and recreates the music from scratch. Their license agreement definitely doesn't allow you to upload music that wasn't made by yourself, so that's why you cannot upload such music there. If
• Movie Studio

  11 answers, most recent on 3/22/2026

  RE: Cleaning a really poor quality video
  @me_again Hi Andy . . . . Panasonic and it was a "big b***er" 🙂 that I assume didn't record in 320x240 so obviously it was reduced just for the demo/commentary purposes . . . . 320x 240 was the native resolution of the early Panasonic VHS or VHS-C,
• Movie Studio

  3 answers, most recent on 5/15/2026

  RE: Magix Hub Speech services
  @spuddy13 Yes, voice cloning is no problem with open source or open weights voice models, like Qwen3-TTS. There are easy to use graphical user interfaces available, for example this: https://voicebox.sh/
• Music Maker

  3 answers, most recent on 6/8/2026

  RE: how can i remove the voice from song in music maker?
  @Jayaprakash-Panoli No, Sound Forge cannot do this. Simply utilize UVR, if you already have it. UVR creates extremely good results, especially if you combine a couple of BS or MelBand Roformer models in ensemble mode. It's much better than any other
• Movie Studio

  20 answers, most recent on 10/9/2025

  RE: Video files not loading
  @Vincent-OBrien and what is the make/model of the camera you are using along with the settings you used for recording?
• Movie Studio

  46 answers, most recent on 1/28/2026

  RE: BEWARE Latest Nvidia GTX 591.44 Drivers
  @me_again Hi Andy Interesting article, the majority of the posts that provide the GPU model would suggest the predominant failures occur with the RTX 5000 series GPU's. John EB
• Other products

  One answer, on 6/16/2025

  [Closed] trying to download the learning models for Vegas 22
  I have Vegas 22 on my computer. I am trying to download the learning models for Vegas 22 but I get an error message stating" there are no compatible products on my computer." Any idea why this would happen and how to fix it? Thanks! Dell XPS windows
• Movie Studio

  3 answers, most recent on 9/5/2025

  RE: [Solved] HEVC causing Magix to crash when exporting - ucrtbase.dll error
  @BrenyC Hi . . . .  'UCRTBASE.DLL error'  . . . . This could be a display driver issue, last time we saw this issue it was with an Intel integrated GPU, are the graphics drivers for the Intel UHD 770, and, if you have a discrete graphics card, eg
• Rescue Your Videotapes!

  7 answers, most recent on 12/19/2025

  RE: Lines in digitized VHS
  I doubt that it is the digitiser. You'll notice the yellow banding in the sky; that will be caused either by poor tape quality or the VCR, so I think the lines are probably caused by the same issue. I just tried another VCR by Samsung and the
• Off topic

  3 answers, most recent on 10/31/2025

  RE: [Closed] Can't reinstall Vegas pro 22, No compatible products found on this PC
  First, you are on the wrong forum...go to http://VegasCreativeSoftware.info for Vegas relates questions. Second, it looks like you are trying to install the Deep Learning Models, not the main application. You have the wrong installer. You can find
• Movie Studio

  8 answers, most recent on 3/13/2026

  RE: [Solved] I have Video Deluxe Plus (2026) :: But ProDAD Hide V2 not included??
  @Apollo89x Hi, Magix as a company have basically tried to mislead/fool people by renaming the basic version as "Plus" | Wheras that used to be the mdi-range level in previous versions. No, nothing is misleading at all. Magix dropped the "Basic"
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  @rickduley You can use IMGBurn to analyse a blank disk: put it in the drive, wait a few moments, then in IMGBurn, choose Mode>Verify. You can see the disk model number in the MID section: Also, I've found my connector doohicky so I can run my
• Video Pro X

  12 answers, most recent on 10/25/2025

  RE: ProX will not write to DVD DL discs
  You're right @johnebaker, you have to have a really good look at the documentation but I purchased an Verbatim External Slimline Model DPAA burner which promised to burn DL discs. I still had to find software which will handle the job and I found
• Music Maker

  6 answers, most recent on 8/24/2025

  RE: Buffer Crackle
  @frank-flores Hi . . . . Crackling with buffer set at 1024! . . . . Did you try increasing the number of buffers and sizes to fix the crackle? What is the specification of your computer system including Windows version and program version, see this
• Movie Studio

  22 answers, most recent on 8/13/2025

  RE: Support and TICKETS
  @jtu001 Hi . . . . My computer performance is perfectly sufficient with a Ryzen 7 and 32GB of RAM. . . . Which model of the Ryzen 7 do you have - there are many variants, in addition is there a NVIDIA graphics card installed? John EBForum Moderator
• SOUND FORGE

  One answer, on 2/9/2026

  Software is not registering any sounds from my interface.
  i'm using Windows 11 home Version    10.0.26100 Build 26100System Manufacturer    LG ElectronicsSystem Model    17Z90TL-H.AUB6U3Processor    Intel(R) Core(TM) Ultra 7 258V, 2200 Mhz, 8 Core(s), 8 Logical Processor(s)Installed Physical Memory (RAM)  
• Xara Designer Pro

  11 answers, most recent on 4/30/2026

  RE: Xara Designer Pro - Slow work after 10-15 min
  @gene-pG-Poole Hi and welcome to the forum. 'Same computer specs as the OP, except' Please do not quote your system specs as above. When quoting your motherboard specs, please give all the information regarding its main components, quoting the
• Movie Studio

  11 answers, most recent on 1/12/2026

  RE: Video Deluxe 2026 - Access Violation Code - Program Crashes
  @SHANE-KOHUT HI Thanks for the feedback, pleased to hear it is now working. I would suggest you put the specification of your computer system including Windows version and program version, see this topic for what is required and please quote
• Movie Studio

  5 answers, most recent on 7/20/2025

  RE: MP4 problems
  @Anthony-Sferlazza Thank you! Now we need you to tell us a lot more about your computer: Operating System version and build; Type, Size and amount of free space on your hard drive(s); processor make and model; amount of RAM installed; GPU make and
• Movie Studio

  11 answers, most recent on 1/12/2026

  RE: Video Deluxe 2026 - Access Violation Code - Program Crashes
  @SHANE-KOHUT HI Thanks for the feedback, pleased to hear it is now working. I would suggest you put the specification of your computer system including Windows version and program version, see this topic for what is required and please quote
• Rescue Your Videotapes!

  35 answers, most recent on 7/16/2025

  RE: Geen geluid bij overdracht VHS-band
  @MV650 Hi. Unfortunately I can't translate the text of the images from Dutch. Can you give us the model and make of your laptop / desktop? Maybe then I can go through the specs or find a manual on an English site. It's really unusual to see a single
• Movie Studio

  2 answers, most recent on 4/26/2026

  RE: Mousewheel scroll direction
  @Jim-Rollinson Hi There is now way to change the mouse scroll direction in program. Depending on your mouse make/model, it may have configuration settings that you can edit for different actions. Have you considered using a 'Shuttle' device? I use a