• Samplitude

  3 answers, most recent on 7/28/2025

  possible script?
  I'm a near beginner on Pro x8 and wonder if there is an App or plug-in that I can load onto Samplitude that sorts out the audio/midi settings basically (that can be tweaked later) so I have a starting point to work from?
• Movie Studio

  14 answers, most recent on 9/8/2025

  RE: MAGIX Video deluxe 2026 Premium (Constantly Crashing on Startup)
  @ItsMichael Hi. I've looked closely at the spec of your Asus card as I have a standard 3060 12 GB card from Gigabyte. The only difference I can see is not in the hardware but the way Asus has tweaked it to give about another 3% boost over the
• SOUND FORGE

  3 answers, most recent on 1/20/2026

  RE: Clicks and pops playing audio and audio exported in Sound Forge 17
  Hello, thanks for the tip!, at first play it seems to sound correctly now. Strange thing is that it seems to be a tweak for slow computers that cant decompress in real time the compressed audio audio, but my pc is a 285k with 64gb, so would not have
• Movie Studio

  14 answers, most recent on 9/8/2025

  RE: MAGIX Video deluxe 2026 Premium (Constantly Crashing on Startup)
  @ItsMichael Hi. I've looked closely at the spec of your Asus card as I have a standard 3060 12 GB card from Gigabyte. The only difference I can see is not in the hardware but the way Asus has tweaked it to give about another 3% boost over the
• Movie Studio

  29 answers, most recent on 5/10/2025

  RE: MAGIX Movie Studio 2025 Suite will not open after installing
  UPDATE: I got the MMS 2025 and it too started crashing at startup. After a bit of troubleshooting I have discovered (in my case) that ASUS GPU Tweak 3 is the culprit. When GPUT3 is enabled MMS crashes. turning GPUT3 off before starting MMS resolves
• SOUND FORGE

  29 answers, most recent on 9/16/2025

  RE: SF 11 refuses to start, even full re install
  There had been a 'few' reports of the 'Elevated Privilege' issue (after a Win 10 update) in Sound Forge11, but they were rare and mostly confined to SF-10 , So you might try running SF-11 as an administrator. Otherwise, there is a registry tweak for
• Movie Studio

  29 answers, most recent on 5/10/2025

  RE: MAGIX Movie Studio 2025 Suite will not open after installing
  nVidia no longer uses GFE it uses what it calls the nVidia App which is basically the same thing I guess. Uninstalled as you suggested. No tweaks to the GPU other than fan control. Rolled back driver to 552.22. Still freezes at launch. Reinstalling
• Movie Studio

  9 answers, most recent on 12/29/2024

  RE: Magix Movie Edit Pro 2025 is stuttering, stopping and starting.
  @CubeAce Hi Ray I let you in on a secret 😉 - I have many prescripted responses/questions for many issues from which I copy and paste and tweak where necessary. John EB
• SOUND FORGE

  3 answers, most recent on 1/20/2026

  RE: Clicks and pops playing audio and audio exported in Sound Forge 17
  Strange thing is that it seems to be a tweak for slow computers that cant decompress in real time the compressed audio audio This has been an issue for many folks. I am not sure the amount of RAM memory has much to do with it since many users have
• Video Pro X

  3 answers, most recent on 3/27/2026

  Program Settings irritations
  I recently upgraded from Pro X 15 to Pro X 17 on my Windows 11 machine and there are a couple subtle program issues that are irritating. 1 - File Open or Ctrl Q now opens a splash screen instead of going directly to a Windows Explorer dialog. The
• Rescue Your Videotapes!

  22 answers, most recent on 3/4/2024

  RE: choppy video
  Thank you Ray. Yes, you are correct. Very basic software/tweaking option
• Samplitude

  3 answers, most recent on 12/5/2024

  Object automation learn?
  Hi folks, Imagine i have a plugin on an object and i want to automate it by dragging a knob. Is that possible? I know how you can set up object automation by targeting a parameter in the object editor, but it's more intuitive to just go into some
• Movie Studio

  14 answers, most recent on 9/8/2025

  RE: MAGIX Video deluxe 2026 Premium (Constantly Crashing on Startup)
  @ItsMichael Hi. I don't know about the others but I have one monitor plugged into the nvidia card and the other into the motherboard video port so both GPU's are active and can be used by the program. Even if you select the nvidia card for your
• SOUND FORGE

  One answer, on 8/28/2024

  Sound Forge Pro 10 suddenly stops playing my audio
  All of a sudden I go to use Sound Forge Pro 10 and open a song into it; do some tweaking and then go to play the music and it won't play. Instead, there's a momentary pause, a glitch sound, and nothing else happens. Does anyone else ever have this
• Samplitude

  8 answers, most recent on 12/5/2025

  RE: Need Help Tuning Focusrite Scarlett for Music Studio 2017
  That's what I'm looking for, thanks! I knew about the ASIO driver but I needed a bit more info on tweaks. Thanks again!
• Movie Studio

  29 answers, most recent on 5/10/2025

  RE: MAGIX Movie Studio 2025 Suite will not open after installing
  @Kelly-Hill Hi . . . . Still do not know why. It only happens with Magix . . . . As @AAProds has commented, there is a known issue with DirectX 12, which MMS 2025 uses, and GeForce Eexperience settings. If you have GForce Eexperience installed,
• ACID

  7 answers, most recent on 9/16/2024

  RE: Acid Pro 11
  I've been using Acid Pro 11 (latest release) with the supplied Melodyne editor this weekend to tweak some vocal tracks. It seems to work fine BUT when I loaded everything back in this morning, all my edits had vanished, so the vocal tracks were back
• Movie Studio

  One answer, on 7/29/2024

  [Closed] D-Log to Rec.709 LUT
  I have Movie Studio Platinum 16 Normally my own video is MP4 and I set white balance & levels (Computer to Studio) to tweak it. However, I get regular dumps of drone footage which is filmed in D-Log 10 so typically the guys apply an LUT to
• Video Pro X

  65 answers, most recent on 4/7/2024

  RE: VPX prices until April 9, 2024
  I like the first video more! 😉 I've read some people say they will fix it in post. I'm one to not want to spend time "fixing" anything in post. Tweaking, yes, fixing, I'd rather not. But, it's good to have tools that will help that happen.
• Movie Studio

  16 answers, most recent on 1/31/2025

  RE: New Blue Essentials GPU Support aktivieren (Magix Video Suite 2025)
  @CubeAce Hi, this is that same 1min 1920x1080 AVC clip. NB Noise Reducer renders faster in VP, it says 7.42mins, I didn't wait but the speed of it rendering made me believe that it would do it in that time. There's a little more CPU usage but not
• Samplitude

  7 answers, most recent on 12/29/2024

  RE: [Solved] Playback along with audio stuttering every 1-3 seconds
  I have been trying to tweak and troubleshoot my Magix Samplitude settings for a few days now and I'm getting very frustrated 😰Hoping you experts can help! Problem When I playback, I get a minor sound delay before I hear the MIDI track, then ok for
• Samplitude

  7 answers, most recent on 12/29/2024

  [Solved] Playback along with audio stuttering every 1-3 seconds
  I have been trying to tweak and troubleshoot my Magix Samplitude settings for a few days now and I'm getting very frustrated 😰Hoping you experts can help! Problem When I playback, I get a minor sound delay before I hear the MIDI track, then ok for a
• ACID

  No answers, created on 2/1/2024

  How do I reset midi automation soI can midi merge a new sequence ontop
  Hi i have learnt about midi merge for recording vst automations , my question is how do I reset the automation so I can try different patterns when I tweak the vst as it just adds to the automations it doesn't replace them .
• Movie Studio

  6 answers, most recent on 2/3/2025

  Video ending is being clipped on rendering
  He's back! I have rendered the video a few times. Each time finding something to tweak. Move a title, zoom on something else. They worked. Video played fine and completely after those renderings. Now suddenly after a bit more editing, I'd