Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

I just upgraded to Pro 18 to be able to check my backing track files for LUFS loudness to make sure they are played with equal loudness on gigs. Is there a fast and easy way to batch check all of them in one go? tnx /JimR

SOUND FORGE

4 answers, most recent on 7/8/2024

RE: [Solved] SF18 crashes when loading a file.

You could try resetting Sound Forg14 and/or 18 in the 'File' menu.. however I would surmise it is a PC related issue. Some folks have had issues with MP3 files and resetting usually resolves that issue. There are no common problems with PCM wave

Music Maker

3 answers, most recent on 12/2/2024

RE: Unable to export

I had the same problem. Bought a faster computer and it works better, but Magix is still notorious for crashing with More than 10 plug ins especially from outside publishers. Make a folder with the project inside it and save the file to a wma inside

Music Maker

3 answers, most recent on 12/2/2024

RE: Unable to export

@Campbell-McMahan When reporting an issue, it helps others if you provide as much info as you can.- What version of MM? eg: 32.1.0.18- What version of Windows?- What have you tried?- exporting to WAV or MP3?- you mentioned "normalizing" -- what

Audio Cleaning Lab

32 answers, most recent on 11/21/2024

RE: importing a stereo mp3 file into both tracks seprately

@Gerald-Shantz Hi, This is getting more complicated, it would seem, than necessary. Then when I play these tracks onto my computer software, I can adjust the volume of each amplifier separately, to create an MP3 file. How are you doing this? Which

SOUND FORGE

17 answers, most recent on 11/29/2025

RE: waveform moves away from marker point when zooming in on soundforge 17

@rraud Recibí consejos del soporte técnico...¿Podría ser que estés editando archivos mp3? Si es así, es probable que se trate de un problema de compresión. Esto se puede solucionar haciendo clic en Opciones > Preferencias > General y marcando

Movie Studio

14 answers, most recent on 3/26/2025

RE: MP3 imports are being reduced to 4-seconds length + Not playing!

@Apollo89x I just downloaded that audio from YT using 4k Video Downloader+ and it loads into Magix without issue. There's something dodgy about your downloader software methinks. The MediaInfo from the 4k Downloader file: GeneralComplete name

Movie Studio

27 answers, most recent on 4/20/2025

RE: Activate Mpeg 4 Codec in Movie Studio 2025 Platinum

@AAProds I cannot import or export any MP4 file anymore in Magix Movie Studio 2025. For what it is worth, thought, here's a copy of the last file I tried to import. FYI--I edit 60 plus oral recordings from my students each week. I had no problem

SOUND FORGE

7 answers, most recent on 10/11/2024

RE: SF 18 build 21 scripting: determine when all files have been rendered?

@Unsounded Hmm, besides the unusual formatting (is this a problem of the code tag in this forum?) of your code the only odd thing I currently see is the line string szName = String.Format("{0:}{2}.{3}", "", szBase, mk.Name, rend.Extension); After

Photostory

12 answers, most recent on 3/12/2025

RE: Hardware Acceleration Failing

Here's another. GeneralComplete name : S:\2024 holidays\Slideshow Videos and Additional Content\1708 Eagle's Rock.mp4Format : MPEG-4Format profile : Base Media /

SOUND FORGE

2 answers, most recent on 2/25/2025

RE: Markers dropped during record do not synch

What format file type are on the timeline? If there are of the lossy type (MP3, AAC, ect), enable "Always proxy compressed formats" in "Options> Preferences> General" Otherwise, try experimenting with a different record buffer setting.

SOUND FORGE

38 answers, most recent on 9/16/2025

RE: MP3 conversion glitches

Hi Rick, the proofer who was listening to the files first reported it on her machine and when I checked the files on my machine (different countries), she was right. The anomalies didn't appear in the WAV files, just the MP3s after conversion. Also,

Movie Studio

13 answers, most recent on 9/8/2025

RE: Nvidia RTX 5080 Graphics Card | But MEP 2026 suddenly stopped using it

Hello...Thankyou :: However I don't understand any of that technical-jargon sorry. *_*(Interlaced / Progressive... ect)I am just importing regular Mp4 footage | Colour-Grading it | And then exporting it (as MP4)I've had this laptop for 3-4 weeks

SOUND FORGE

7 answers, most recent on 4/10/2024

RE: Chunks of sound missing after saving files

@robert-p Don't edit MP3 files. Convert them to WAV first or enable to always proxy compressed file formats in the program preferences. Compressed formats like MP3, OGG or AAC or are only for distribution to listeners after the final export.

SOUND FORGE

10 answers, most recent on 2/17/2025

RE: Can SF 7 be uninstalled and reinstalled?

rraud, thanks for getting back. I bought SF-5 in 2004. It came with an installation disc that asked for the SN, which was included. I *think* I registered that online as well with no problem. Not sure anymore. Some time later, I contacted Sony

SOUND FORGE

16 answers, most recent on 3/28/2025

RE: slow down on exported music

The bit rate should have no affect on the speed/pitch. It can affect the overall quality though. Lossy files with an very low bit rate will often have a flanged garbled type soundAn MP3 encoded at a sample rate of 44.1kHz should playback the same,

SOUND FORGE

One answer, on 3/8/2024

Erro salvar mp3 sound forge 17

Somente para salvar em mp3 estou tendo este problema e não sei como resolver. ja desinstalei tudo reiniciei e não funcionou sound forge 17

Video Pro X

32 answers, most recent on 1/18/2025

RE: "Missing" audio in VPX16

@emmrecs Hi Jeff, Ray . . . . It will not play in any Windows media player but will in VLC . . . . Confirmed. Media Info data shows there is a 'non standard' combination of an AVC video stream with a MP2 audio stream, by coincidence I was testing a

Movie Studio

33 answers, most recent on 3/6/2025

RE: Odd Autosave Behavious with MS 2025 version 239

Even more confusion now. At 12:24 I started a new test project - 1 short video file 768x576 with MP3 audio - and saved it as 1_Again. Autosave kicked in as expected BUT the first backup seemed to have happened BEFORE I saved the Project.

Movie Studio

27 answers, most recent on 4/20/2025

RE: Activate Mpeg 4 Codec in Movie Studio 2025 Platinum

@William-Keeth Hi In addition to @emmrecs comment. Does the popup occur when opening an existing project, or when adding video to the timeline? If when adding to the timeline, are the videos from a new source or videos that could be previously

SOUND FORGE

4 answers, most recent on 5/21/2024

RE: How do I reduce the file size with Sound Forge 14 please?

@JennyPxyz Export in a compressed file format (mp3 / ogg) in a low bitrate (64 kbps). If you only have speech in your recording you can also reduce the samplerate to 11 kHz or 8 kHz.

Movie Studio

13 answers, most recent on 3/4/2024

RE: No Audio after import

@emmrecs @me_again @johnebaker @Igor_Krayushkin A question for you all. When I was perusing the specs of Video Saver, I saw a note that saying that Windows Media Player is required for MP3 import. Movie Studio doesn't say that. Do any of you who

Music Maker

6 answers, most recent on 9/12/2023

RE: [Solved] Questions on Soundpool Commercial licensing

In the end I didnt want to bother moving files around so I ended up using a commercial mixer - that exports an Ultra 24 bit 48k version as well as HQ 16 bit 44k and Medium 256k mp3 versions.

ACID

2 answers, most recent on 9/10/2024

Why does my track change tempo when changing the key signature?

Hi. I have an old rendered mp3 track that I need to change the key of. Every time I change the key, the tempo changes as well. How do I get around this? using Acid 11 pro. Thanks