• ACID

  13 answers, most recent on 12/31/2024

  RE: My Acid 11 Error code 14
  @Gunter-Bubleit Hi The Error code:-14 means you are putting a valid MAGIX serial number into the wrong MAGIX product or version/edition. In the case of Acid check you have installed the correct version for the licence you have. If this is an upgrade
• SOUND FORGE

  3 answers, most recent on 10/18/2025

  RE: Using m4a files in Sound Forge 11
  The old solution for this was to install QuickTime, then iTunes. This would result in a sub-program - Apple Application Support being installed. This would do the trick for both Sound Forge Pro and Vegas Pro.I recently did a clean install of WIndows
• Movie Edit Now

  16 answers, most recent on 10/22/2024

  RE: Cannot Open Video Files Recorded With OBS In MAGIX Movie Edit Pro 14
  @Grimbles HI . . . . MAGIX Movie Edit Pro 14 . . . . Unfortunately there has been a tendency for users to abbreviate 20xx versions to the last two numbers which has, in the past, caused confusion over which version is meant. Can you confirm which
• Samplitude

  7 answers, most recent on 4/17/2024

  Wont start
  Hi Magix. I have just downloaded the 14 days fee trail, but when I start the peogram it wont start? What do I do wrong ? Brg. Lars
• Movie Studio

  One answer, on 4/13/2024

  RE: [Closed] DVD Architect
  @Terry-Difazio I believe DVD Architect was only a part of the 14 Suite and 14 Premium Edition. You need to contact your seller, because you've very likely didn't buy it from Magix, so nobody here can help you. They haven't sold DVD Architect for a
• Movie Studio

  16 answers, most recent on 1/31/2025

  RE: New Blue Essentials GPU Support aktivieren (Magix Video Suite 2025)
  @Willig Hi, NewBlue Noise Reducer almost freezes my PC on a 1min 1920x1080 AVC clip, every action has a 5secs-ish delay, playback is next to 0, Taskmanager shows almost nothing going on when playing. Turning on the lightning symbol & creating
• Video Pro X

  22 answers, most recent on 5/30/2025

  RE: newblue display is faulty in timeline monitor
  @Betovalle Hi, I think the thumbnails in the fx window are showing the first frame of he clip, trim off that first frame to see if it updates the thumbnails. I can't check this because my Colorize loads differently..? Yours shows how it used to load
• SOUND FORGE

  5 answers, most recent on 8/14/2024

  RE: Channel Converter user preset not showing from Batch convert
  @davcis, All custom presets does not appear in SF BC in all version. SF BC was carried over from Sony SF to Magix v14. Devs changed the interface of BC in v15 which is buggy. One bug I discovered is when you set up the Effect and use any Ozone
• Samplitude

  2 answers, most recent on 10/12/2024

  RE: Samplitude 14 Manual
  @Antony-Meloy Welcome to the Magix user to user forums! Have you checked this page? There does not seem to be a manual there specifically for Samplitude 14, unfortunately, but perhaps one of the other version manuals might be helpful to
• Movie Studio

  One answer, on 4/13/2024

  [Closed] DVD Architect
  I just purchased Movie Studio 14 I have registered it but I never got a serial number for DVD Architect. Who do I contact to get the number?
• Movie Studio

  24 answers, most recent on 9/20/2025

  RE: Inserting a clip on the timeline
  @Pete-Lowland Hi, at the bottom of the preview window are 3 buttons, Single Objects - that doesn't do anything & sounds like that's what your in. Single Track & All Tracks will move the objects on the timeline as you wish Edit, Sorry just
• SOUND FORGE

  5 answers, most recent on 4/24/2025

  Sound Forge Pro 18 not remembering save settings, plugin settings
  Hi, I just recently updated to SF 18 from SF 14 and am having some issues. Previously, anytime I saved a file, the save settings would default to the "default" setting, that is to say, whatever the file itself was set to. Now, it doesn't do that. It
• SOUND FORGE

  4 answers, most recent on 9/1/2024

  RE: re- activate
  @Robert-Hite You can find out for which product your serial number is valid if you enter it here: https://www.magix.com/int/support/my-service-center/product-downloads/ Error -14 usually means that the serial number is correct, but must be used for
• Music Maker

  One answer, on 6/12/2024

  RE: Flac no Sound Forge
  @edgard-edros6113 Houve um tópico sobre esse problema há alguns meses.  https://www.magix.info/us/forum/sound-forge-pro-14-multichannel-flac-support--1251260/  O Sound Forge não pode salvar arquivos Flac multicanal, apenas Flac mono e estéreo.  Você
• SOUND FORGE

  7 answers, most recent on 2/3/2023

  [Solved] Noise after installing Sound Forge 14
  I’m replacing my good’n’old Dell Inspirion 5558 for a Dell Inspirion 3511. This one came with Win11. Sound works OK until I install SF14. After that, it brings me a huge noise at the right channel, using any kind of audio access (Sound Forge,
• SOUND FORGE

  2 answers, most recent on 5/23/2024

  Transferring software to new pc
  I have a new pc and was downloading Sony Sound Forge Pro 14. I used my existing key but it's reflecting this is a trial which should not be. How do I correct this issue?
• Movie Studio

  3 answers, most recent on 7/14/2024

  RE: Movie Studio Platinum Upgrade from Using Movie Studio Platinum 14
  @Stephen-Flannery Movie Studio Platinum 2025 is a different programme to your Vegas Movie Studio14. It's what was called Magix Movie Edit Pro which is now renamed Magix Movie Studio. That's why you are finding it so different including the absence
• Rescue Your Videotapes!

  17 answers, most recent on 3/31/2024

  RE: Can't get it to work on 2 different laptops
  Sorry, I had it ready and forgot to add it.
• SOUND FORGE

  8 answers, most recent on 2/25/2026

  RE: Sound Forge Audio Studio works incorrect with VST3 plugins
  I tested SFAS 17 with plugin scan files taken from Music Maker 2026. Yes, the program recognized all plugins, but not all of them agreed to work correctly. If anyone is interested, I will now describe the results of my tests. The program acts
• SOUND FORGE

  5 answers, most recent on 8/14/2024

  Channel Converter user preset not showing from Batch convert
  Hi,   I'm using Sound Forge pro 18 suite. Need to convert a huge amount of files recorded with the Rodecaster Pro. This are 14 channel wav files and I need to extract certain channels as individual mono files.The process works with individual files.
• Video Pro X

  4 answers, most recent on 8/17/2024

  RE: [Closed] re program AViDemux
  @Ivor-Williams007 Hi . . . . windows 11 stopping it from installing on my laptop . . . . In Windows, Apps, Advanced app settings change the option in the image below to as shown: HTH John EBForum Moderator
• Movie Studio

  4 answers, most recent on 11/13/2025

  RE: custom shortcut keys
  @Tiempie-Lamprecht Hi, I don't know why one would want to do this, but I had no problem doing this in 2025 Suite. M is the shortcut for the Mixer. I presume that you clicked on "Assign keyboard shortcut" after putting M in the white box. When you
• Other products

  One answer, on 6/23/2025

  [Closed] cannot install vegas pro22
  purchaced on june 6th and have spent hours do all the FAQ suggestions, and nothing worksAfter 10 days, i get this responce to my ticket, yes been there and done that, and still not follow up.i tried to phone the US and Canadian numbers and they are
• Movie Studio

  One answer, on 1/27/2024

  [Closed] Movie Studio Platinum 14.0 stopped
  I've been using Movie Studio Platinum 14.0 for a few years, but now it's stopped working. I've already uninstalled and installed it again, but when I click on the icon, it loads and then the "stopped working" message appears. Windows 10 64 bits