• Movie Studio

  30 answers, most recent on 7/4/2024

  RE: My video is freezing when I try to export it. (MP4)
  @Tony-Rapisarda Hi . . . . send me videos that they took that come in HEVC form . . . . The 2nd time, most of the audio is offset by 1-15 seconds. Any ideas on how to fix this? . . . . This would suggest that some or all of the video files are
• Video Pro X

  68 answers, most recent on 3/27/2024

  RE: codec cost
  @Reyfox Hi The video is 'standard' AVC/h.264 at a very high bitrate due to the profile level being high quality at 5.1. The encoding is standard GOP structure, however it is not All-Intra, therefore no AVC-Intra decoder needed. From the M=1 N=12
• Movie Studio

  9 answers, most recent on 10/10/2024

  RE: YouTube Shorts Help
  @DarkWestern I'm at fault for writing in cryptic; looking back, my instructions were a bit misleading. So, here's a better version. - Set up your movie settings (File>Settings>Movie); use one of the Social media presets, or type in your own
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  @johnebaker John, yes, I get those edge lines too. I surmise that that will be because 1.33 is not 1.333333333r. Unfortunately, MMS will not accept the correct ratio (nor will it accept it's own 4:3 droplist setting). As for the frame shape, if you
• Video Pro X

  2 answers, most recent on 11/19/2024

  RE: perception in VPX (trial) in relation to MMS
  @johnebaker Even though I'm still using Windows 10, in my environment VPX stands out and you brought the terminology very right: more precision in VPX! (I evaluated this in the speed effect when I was positioning variable frame rates with the mouse)
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  @johnebaker 0.25 x is the limit with the speed effect no matter what values lower than 0.25 you type in irrespective of whether the audio is attached or deleted before applying the Speed effect. However by using the mouse Stretch mode you can slow
• SOUND FORGE

  2 answers, most recent on 9/24/2024

  RE: Status format for 23.976?
  SFP does not have a 24 drop frame setting in the 'time display'. TC metadata can be changed in existing BWF files, I think Sound Devices 'Wave Agent' can transcode a WAV to BWF.
• Movie Studio

  43 answers, most recent on 7/18/2024

  RE: Can not trim or delete portions of audio
  @Eric-Elliott Hi Eric, The timeline is measured in hours, minutes, seconds and frames - hh:mm:ss:ff. There are no fractions of a second, only frames. Still images are as long as you want them to be - meaning showing for x seconds or y frames - you
• Movie Studio

  15 answers, most recent on 6/8/2025

  RE: Export results not accurate to settings.
  @DarkWestern Hi, Every editor is pretty much the same in this regard, as @AAProds said When you create/open a new project the program will ask you what size & frame rate you want. When you import the first video clip into that new project, if
• Movie Studio

  41 answers, most recent on 2/6/2025

  RE: How to fix or smooth de-interlaced content?
  Here's a MP4 snippet render of a conversion to 50 frames per second of the Deint file (00059) using the RIFE plugin of AVISynth. It's not perfect (see the bouncy titles at the start) but does a pretty decent
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  @me_again @AAProds @johnebaker @vdl-user-v19 I'm not sure if my contribution is relevant or not as I'm still using MMS 2024 and VPX 14 but I'm not having any quality issues with hardware encoding at 4K or HD at any frame rate from 60 down to 25fps
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  Yes the NTSC numbers are more confusing than PAL. The original NTSC frame rate was 30, but to be able to slip in the color it was changed to 29.97 (30000/1001), but 24FPS became 23.976 and then interlaced to 29.97. I haven't checked the 29.97 rate.
• Video Pro X

  175 answers, most recent on 5/27/2026

  RE: Video Pro X16 - New Features and Bug Repairs
  @Bol @johnebaker And, screen recording now also works. Go figure. I had trouble with at least one recording that VPX didn't like. I had to run it through Handbrake. It had the following: GeneralComplete name                            :
• Movie Studio

  32 answers, most recent on 6/30/2024

  RE: Scrolling Suggestion-Thoughts Please
  @browj2 @AAProds Hi John, Al. This gets more curious. In VPX the mouse wheel movement of one positional rotation gives me a two and a half frame jump but in MMS it is one and a half frames. I tried another experiment and adjusted audio frame buffers
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  It was made from a 720x480 4:3 DVD which was apparently lifted from a VHS tape likely of a broadcast, but may have been a dub from a 16mm film. As to the specs for the original film it is "The Leathernecks have Landed" which can be researched on
• Movie Studio

  15 answers, most recent on 5/14/2024

  frame rate
  Hi can anyone help with my issue below. Thanks I have recently upgraded to Movie Studio suite 2024. My project setting are HD 1080p and 50/100 frame  rate /shutter speed. I recorded a video with my Iphone using 30/60  and imported the clip to my
• Movie Studio

  9 answers, most recent on 1/29/2025

  RE: No sound / audio in player and export
  I downloaded and ran mediainfo. I imported the same vob file as attached below. I clipped it at 6:00 and exported as an MP4. Audio is present at the start of the video abut cuts out after about 2:00. video continues with no sound. I did ungroup the
• SOUND FORGE

  2 answers, most recent on 9/24/2024

  RE: Status format for 23.976?
  Thanks for the response! 23.976 would be a Non-Drop format. Current options are (under OPTIONS/Status Format pull-down menu...) Samples Time Seconds Time & Frames Absolute Frames Measures & Beats SMPTE Film Sync (24fps) SMPTE EBU
• Video Pro X

  15 answers, most recent on 11/13/2024

  RE: VPX/MMS frame rate variable
  @AAProds After adding the keyframe, the program does not allow data entry in the frame rate field!It should! But that is not what happens!
• Movie Studio

  12 answers, most recent on 4/25/2024

  RE: Error Code When Creating a Movie File
  @Marcus-Galiber Hi Do you log on to your computer using your Microsoft account, possibly your email address? @Former user - OT however, the 1 frame vid is typical of a timelapse capture being started then cancelled before the second frame was
• Movie Studio

  41 answers, most recent on 2/6/2025

  RE: How to fix or smooth de-interlaced content?
  Here's a MP4 snippet render of a conversion to 50 frames per second of the Deint file (00059) using the RIFE plugin of AVISynth. It's not perfect (see the bouncy titles at the start) but does a pretty decent
• Music Maker

  2 answers, most recent on 11/16/2023

  [Solved] Upgraded to 2024 and now can't drag audio tracks to precise location
  I've just upgraded to 2024 while in the middle of working on a music mix (big mistake). I'm now unable to slide my audio tracks to precise locations on the grid. I am creating a mix of songs that need to start and stop at certain points in order for
• Movie Studio

  4 answers, most recent on 10/16/2024

  RE: Error in Module "VCRUNTIME 140 dll"
  @Ladislav-Foglar Hi Please do not duplicate post on the same topic/issue. I have hidden your duplicate comment, which was posted in an unrelated topic. Ahoj Prosím, neduplikujte příspěvek na stejné téma/problém. Skryl jsem váš duplicitní komentář,
• Movie Studio

  32 answers, most recent on 7/29/2024

  RE: Deinterlacing-How does Magix do it?
  @AAProds Hi Al. It works reasonably well with anything shot at a distance but even then if there is any camera movement the sides of the frame gets weird distortions if the foreground is busy, like bushes, plants, anything with fine detail. The less