• Movie Studio

  22 answers, most recent on 3/9/2015

  RE: Burning a blu-ray disc
  Hi Terry,    Here is my process. It  sounds to be what you do. (Yes there is a blank BD-R disc in the burner.) 1. From Edit mode, I click "Burning". From there I choose the template I want, modify the date, and then I click on the Burn icon
• Video Pro X

  10 answers, most recent on 2/13/2015

  RE: Audio "mute" on many clips with audio on Pro X
  Hmmm.. interesting.  So the sampling frequency was not the problem here! I'd still like to see/ attempt to open and play any extract from one of these files, if you can post it somewhere. http://www.datafilehost.com/d/3b91245c 4
• Rescue Your Videotapes!

  3 answers, most recent on 12/15/2014

  RE: I have registered my Magix etc but cannot get into the import screen with my Sony handycam connected via Magix usb
  Hi DAve From PM . . . .I have a Sony model CCD-TR511E. Thanks for your help  . . . . To transfer the viceo from the camera you do need a Firewire (1394) connection on your computer or laptop. It is possible to buy an adapter card that can
• Movie Studio

  One answer, on 11/20/2014

  RE: Difficulty uploading video from camera into MMMP 1015
  Hello Michael.  I can't answer your question from direct experience so this may not be helpful, but  1.  Have you tried clicking on the "highlighted MMEP 2015" icon mentioned in your first paragraph?  If you do, what happens? 2.  Although I
• Movie Studio

  2 answers, most recent on 10/19/2014

  RE: Can Magix Movie Edit 2013 Plus read i.LINK or FireWire?
  Hi Firewire (iLink) and USB are two entirely different mthods of transferring data between devices.  Firewire sends video as a continuous stream of data and any device which offers to convert this to USB has to be able to store this data
• Movie Studio

  2 answers, most recent on 10/19/2014

  RE: Can Magix Movie Edit 2013 Plus read i.LINK or FireWire?
  I see the Sony has firewire output so I assume you are using the USB to connect to your PC? Theoretically, yes this should work.  But, on another video forum I visit I've seen Firewire to USB "connectors" described as "snake-oil"!  IOW, they
• Movie Studio

  2 answers, most recent on 10/19/2014

  Can Magix Movie Edit 2013 Plus read i.LINK or FireWire?
  I bought a sony fx1 and i want to edit the video i took. I have a pannacle studio moviebox with firewire. Can magix movie 2013 plus read the video from that?
• Movie Studio

  9 answers, most recent on 10/12/2014

  RE: using edit pro (trial) to load DV tapes from Sony handicam
  Using firewire via pcie card and sony handicam. Other info FYI. Thanks again Operating System Windows 7 Professional 64-bit SP1 CPU Intel Core i7 4770K @ 3.50GHz 29 °C Haswell 22nm Technology RAM 32.0GB Dual-Channel DDR3 @ 666MHz
• Movie Studio

  9 answers, most recent on 10/12/2014

  RE: using edit pro (trial) to load DV tapes from Sony handicam
  firewire cable which appears to be ok and video tape runs in preview screen - but files not sent to hdd (1tb)
• Movie Studio

  One answer, on 9/26/2014

  RE: can I capture hi-res miniDV NTSC material in MovieEditPro 2014 Plus?
  Hi What options are you using for the Projects settings? The project options should be set to the appropriate HD settings for your TV standard eg NTSC full HD. Are you selecting HDV Camera as the source  in the record options - note this
• Movie Studio

  9 answers, most recent on 8/15/2015

  RE: Can not capture DV Camcorder with USB cable - why?
  Hi John, Oh! then I got lucky when I bought this camcorder because I didn't realise it was special. I found a sticker on the side that says USB 2.0 DV data streaming. I checked the Specifications of MEP and saw that it needs Firewire to
• Movie Studio

  9 answers, most recent on 8/15/2015

  RE: Can not capture DV Camcorder with USB cable - why?
  Hi . . . . You have an anomaly, . . . . @ John C B - not quite to quote Microsoft :- . . . . If you have a DV camera that supports streaming over USB (also called a USB Video Class [UVC] camera) . . . The camera must support this to be
• Movie Studio

  9 answers, most recent on 8/15/2015

  RE: Can not capture DV Camcorder with USB cable - why?
  Thanks for your responses everyone. It is a real shame that Movie Edit Pro 2014 Plus will not capture my DV Camcorder Video from my USB cable because I was very impressed with it until I discovered that hiccup. My Panasonic Camcorder Operating
• Movie Studio

  9 answers, most recent on 8/15/2015

  RE: Can not capture DV Camcorder with USB cable - why?
  Hi again, It has been quite a while since I used my DV camera and recorded everything onto the computer. I looked it up and the connection was a firewire. I also looked up in the MEP2014 manual under DV and the connection is supposed to be
• Movie Studio

  9 answers, most recent on 8/15/2015

  RE: Can not capture DV Camcorder with USB cable - why?
  Hi I agree with the John's although I did read a link from MS Moviemaker to the microsoft help files that did say you could capture from a DV camera via a USB cable. Never seen it done though! Further more MS Moviemaker says you can even
• Movie Studio

  9 answers, most recent on 8/15/2015

  RE: Can not capture DV Camcorder with USB cable - why?
  Hi . . . .This is a little confusing. . . . I agree with John C B . . . . . The only solution I have found so far is to buy hardware to add a FireWire connection to my laptop and I will definitely not do that. . . . AFAICS that is the
• Movie Studio

  9 answers, most recent on 8/15/2015

  Can not capture DV Camcorder with USB cable - why?
  Hi Folks, I've been trying to find answers to this question and can't. I have a Panasonic NV-GS230 (tape) camcorder which came with a USB cable. I have used this to capture video from my camcorder with no problem using Movie Maker to my
• Video Easy

  10 answers, most recent on 1/16/2014

  RE: Video saver quality
  Hi, If your camera has a DV port you can use a FireWire cable to link the camera and the computer with a FireWire card in the computer and use near any software to control you camera to copy mpeg4 video to your computer. It is the esiest way to
• Video Easy

  10 answers, most recent on 1/16/2014

  RE: Video saver quality
  Hi . . . . you can link directly your camera to a computer using a USB cable from the camera to a USB port on a computer . . . . This only allows you to copy images from the memory card or use the camera as a webcam. I have gone through the
• Movie Studio

  6 answers, most recent on 1/7/2014

  RE: why do I get when connecting SONY HVR-HD1000U in Magix Movie edit pro 2013?
  As I mentioned my SONY  iLink cable has camera connection plug at one end and Firewire plug at the end for computer. My desktop has i5 processor  and  mother board  ( processes HD signals) with fire wire connection plug. So iLink firewire plug is
• Movie Studio

  6 answers, most recent on 1/7/2014

  RE: why do I get when connecting SONY HVR-HD1000U in Magix Movie edit pro 2013?
  Thanks John, To connect to my desktop PC I am using cable provided by SONY called "iLink" which is a IEEE 1394 data transport bus which is also known as firewire cable. Baal
• Movie Studio

  6 answers, most recent on 1/7/2014

  RE: why do I get when connecting SONY HVR-HD1000U in Magix Movie edit pro 2013?
  Hi . . . . and camera is connected by ilink cable. . . . . Is this to a IEEE 1369 Firewire port or to the USB port on your computer?  For full control this should be connected to a Firewire port. John  
• Movie Studio

  4 answers, most recent on 12/22/2013

  Crop video images at start or end of scenes
  Hello,  I have 'digitized' some old 8 mm films with DVcamera and projector. I use an old Laptop with an older version of MEP for this job. The video is transferred directly 'on the fly' from camera to PC via Firewire, to an external HD without
• Movie Studio

  2 answers, most recent on 12/3/2013

  listen I cannot Download my HDVR 1080 it hrough firewire, only through DVor VCR,like what the heck is that. I get half crud resolution, and a headache to DL to other source. my Mpeg does not work even on DV VCR just says coult not connect to selected
  listen I cannot Download my Sony HDVR 1080 it hrough firewire, only through DVor VCR,like what the heck is that. I get half crud resolution, and a headache to DL to other source. my Mpeg does not work even on DV VCR just says coult not connect to