• Movie Studio

  21 answers, most recent on 2/7/2023

  RE: MEP 2016 Copying Attributes To Other Clips?
  @CarpentersMate Hi Mike. The mixer could have been used instead for the audio on that track. Other clips can be on other tracks with their own EQ in the mixer. The amount of tracks in use in a project won't effect how well the program responds. It
• Movie Studio

  26 answers, most recent on 6/29/2023

  RE: Editing single channel sound (2 tracks) using Sterio
  @Tony-Haack Hi Tony. You certainly know how to complicate things without trying 🤣👍. All I did was copy and paste the same audio track (Track 2) to the track underneath (Track 4)at exactly the same spot in the timeline, and then pan the top track
• Video Pro X

  15 answers, most recent on 11/29/2023

  GOYO Voice Separator Noise Reducer Plugin for VPX and Movie Studio
  Hi, In another thread, I mentioned the GOYO Voice Separator plugin that can remove vocals, or at least reduce them way down, without greatly affecting the other audio. It has 3 tools - Ambience, Voice and Voice Reverb - so it acts like a Noise
• Music Maker

  157 answers, most recent on 12/30/2025

  RE: Wishlist for the next Music Maker!
  Super Happy with the new Music Maker 2025 Premium so far.... I think great job for Core Program features instead of 3rd party add-ons.... The new FX Rack and workflow is really a good step in right direction to make MM more DAW valid... Many good
• Video Pro X

  18 answers, most recent on 6/8/2023

  RE: Possible Bug in VPX14 and MMS2023 - Mixer FX and Mastering crashes
  @browj2 Hi John. I reported on the forum about this months back and sent a ticket. You even replied to the thread. I had no reply from Magix on the problem. [Edit] However, I did find that if I didn't open the mixer master effects volume panel again
• Movie Studio

  21 answers, most recent on 2/7/2023

  RE: MEP 2016 Copying Attributes To Other Clips?
  @CarpentersMate Hi Mike . . . .  I master the EQ using the equalizer (or) the Mixer (correct)? I actually prefer the equalizer ... They are the same tool/effect - just a different route to acess it and in its scope ie using the mixer applies the
• Movie Studio

  23 answers, most recent on 6/14/2023

  RE: Editing audio on the timeline
  @Tony-Haack Hi As @emmrecs has commented - 'You achieve this by cutting the audio both sides of your "mistake" and then deleting the unwanted portion. Then you do have a lot of separate objects.' Below is the timeline for my Mixer tutorial here - as
• Samplitude

  3 answers, most recent on 10/8/2025

  New update is available for Samplitude Pro X8 and Music Studio X8
  Happy new year to everyone! We start this year with small bugfix patch for Pro X8 nad Music Studio (see below). More good things to come this year, stay tuned A new update is available for Samplitude Pro X8 and Pro X8 Suite, which can be installed
• Movie Studio

  One answer, on 5/8/2023

  No sound...
  It has been a while that I worked with my Movie studio 2023 tool, but now I'm making a short video. But when I draw an audio file in the arranger view (under the video tracks), no sounds comes out of the speakers and nothing is moving on the mixer
• Audio Cleaning Lab

  6 answers, most recent on 6/27/2023

  RE: Volume & Modern EQ
  @Jeri Hi Jeri, The icon represents a slider on a vertical meter, much like on a mixer. Did you click with the left mouse button? If not, the value is not indicated. @vincent-mulder Hi, How much would you be willing to pay for telephone support? Me?
• Movie Studio

  8 answers, most recent on 3/17/2023

  RE: Update to 22.0.3.172
  @Marc-Goder @johnebaker @me_again I am having similar problems I have with some of my audio mixer presets in as much as some slider positions within some of the NewBlue effects are not being recorded while others are within the same preset when they
• SOUND FORGE

  12 answers, most recent on 12/17/2023

  RE: Sound from browser stops when starting Sound Forge Audio 16 on W11
  @Dale-Haaland Hi   Do you have a pair of speakers or headphones plugged into the Realtek Audio speaker/headphones socket on the motherboard rear panel or front panel audio socket? If so then then the following works for me, with no VB cable: In the
• Samplitude

  8 answers, most recent on 3/2/2024

  RE: No master audio signal in midi track only project
  @Luca8650 If the Juno plays the MIDI notes it is connected fine. But Samplitude needs the audio signal back from the Juno as well. Can you show us a screenshot of your Audio Setup settings in Samplitude, too? Usually, you should have selected an
• Movie Studio

  15 answers, most recent on 3/24/2023

  RE: Recording Audio
  @johnebaker Hi John. I agree it sounds like a wrong input is connected that has no signal coming in and the Windows mixer volume is at maximum on the input. I am still concerned that @Bobbie-Barr has a wrong selection in the Windows options. That
• Movie Studio

  51 answers, most recent on 11/17/2023

  RE: MAGIX Movie Studio 2024 Platinum problems
  @AAProds Hi Al. Did the audio in the converted file play all the way through in MMS? Can a file that can be played correctly in more than one media player be said to be borked?     That's a tough one to call I think Al as some files may well have
• SOUND FORGE

  6 answers, most recent on 7/11/2024

  RE: Trying to find alternatives
  Exactly what type of 'noise' are you referring to? SF Pro 18 includes the legacy Noise Reduction Pack (aka, NR-2.0) and iZotope's RX Elements qhixh ia goos doe sin typw noise reduction, clicks and pops and clipped peak restoration. For
• ACID

  No answers, created on 5/9/2023

  FX Slider -vs- Tracks
  Difficulty Adding FX To The Correct Track!There is no Direct Connection between Selected Timeline Track w/Custom Color (or not) nor Selected/Highlighted Track Selection and Mixer Track.I need a Fast Easy Way to Easily Recognize which FX Track goes
• Video Pro X

  175 answers, most recent on 5/27/2026

  RE: Video Pro X16 - New Features and Bug Repairs
  @browj2 Hi All, Sorry about not getting back sooner, but right after I posted last (ok, as I was posting my wife was telling me to get going) I had to run off to a funeral (not mine) and then we had another series of house guests for the weekend.
• Video Pro X

  13 answers, most recent on 1/16/2024

  RE: Questions about "DVC Pro Encoder Upgrade"
  @RobertR Hi Robert, Are these files from an old Pro Camcorder by any chance? The files are odd in that they could store a lot of information with that DVCPRO wrapper but the image size is small and audio channels too many. I assume you set the
• Samplitude

  6 answers, most recent on 7/6/2023

  RE: 2 channel Stereo Surround and 5.1 Surround
  Thank you again ! I will try UVR 5. I remember spectralayers (i have 7) can Split the tracks and select the parts (bass, piano etc.) I used it to remove dialogs in a movie scene and adding my voice on actors. Works great. I don't have such gear
• SOUND FORGE

  10 answers, most recent on 1/11/2025

  RE: GoPro Audio Problem - Any way to restore
  @johnebaker Hi John EB, Not to confuse the two issues. The recording of the woman with the mic was fine, except for the effect, reverb, that the DJ likely had on the mixer. See ** below. I just used the DeReverb a bit and also got rid of some
• Samplitude

  3 answers, most recent on 12/24/2022

  USB output clipping mixer (x32)
  Got my berhinger x32 mixer connected to my PC with USB. Issue is that the mixer shows clipping, and I hear distortion, even though the fader levels are all green, not even in the yellow.   No idea what to do.
• Movie Studio

  26 answers, most recent on 6/29/2023

  RE: Editing single channel sound (2 tracks) using Sterio
  @Tony-Haack Hi Tony, You missed a step. In my video, the left channel, meaning the left microphone, was put on both left and right channels on the same track. Since they are now of equal volume out of both speakers, assuming that both of your ears
• Samplitude

  6 answers, most recent on 7/6/2023

  RE: 2 channel Stereo Surround and 5.1 Surround
  @ElJulo You can either select in the new project dialog that it should be a surround project or in the mixer window in a preset list below the setup button. You can then place all your sounds inside the surround field. You would need surround