• SOUND FORGE

  12 answers, most recent on 9/11/2024

  RE: .m4a not supported in SOUND FORGE Pro 13?
  Try changing file extension to <.raw> Otherwise a work around is to convert the M4a to a PCM format in another app or use an online transcoder (Zamzar for instance)
• Movie Studio

  272 answers, most recent on 4/1/2021

  RE: Movie Edit Pro 2021 is out - New features
  When I installed MEP 2021, it had Enabled the "Overload Optimization for Realtime Playback." Is that an MEP default? Or the result of sniffing my system? (In the MEP 2020 days, I recall it asking me if I wanted it to sniff to "enhance performance."
• SOUND FORGE

  14 answers, most recent on 9/28/2020

  RE: SF14 crash on openin / playing .WAV files
  Welcome to the Magix Sound Forge forum @LordJarhead. Have you tried resetting SF which also clears the cache (file menu). I could not install the build 111 update at all... kept getting the message "must have Win 7 or 8" (duh, I have Win 10) and the
• Movie Studio

  26 answers, most recent on 8/26/2020

  RE: Frame size for export.
  @browj2 Hi John I think you mean "Don't digitise at 720 AND don't then use Size/Position to fill the 16:9 frame - but it's OK to do it if your raw material is 1440x1080". My old Super 8 films pass the test, but my newer Hi 8 and 8mm camcorder files
• Movie Studio

  26 answers, most recent on 8/26/2020

  RE: Frame size for export.
  @Former user Hi Unfortunately literally all my raw stuff is recorded in 4:3 format from the 'eighties and early 'nineties, so the dilemma I face is whether to leave the edited material in 4:3 with the inevitable bars down the side when played back
• Video Pro X

  25 answers, most recent on 8/15/2020

  RE: Exported video delayed, audio slipped, no GPU acceleration
  Dear @johnebaker, I don't have the original video, but I recorded a new one and rendered it with both software. The issue is the same. However I realized that the lag and delay is only happening, when I render it above 1080p. But I would like to
• Movie Studio

  37 answers, most recent on 9/5/2022

  RE: Video quality very bad after export /MAGIX MOVIE EDIT PRO PREMIUM
  @Scenestealer Hi Peter. I have a contact who is a YouTuber who only exports his videos for upload encoded with only I frames and the files are huge. They also look OK but I'm not sure they look that much better when he uses his Osmo Pocket over the
• Other products

  One answer, on 8/10/2020

  RE: Can Photo Manager Handle Vector Graphic Formats in Addition to Raster?
  @ATKOgirl Hi and welcome to the forum. . . . . Can Photo Manager handle vector formats in addition to raster? Such as: eps, svg, wmf, ai, pdf . . . According to the manual available under Help there are no vextor formats metioned only the following
• Movie Studio

  37 answers, most recent on 9/5/2022

  RE: Video quality very bad after export /MAGIX MOVIE EDIT PRO PREMIUM
  @pmikep @johnebaker @Scenestealer @Banani @AAProds Just when I thought I was getting a handle on everything! 😂 Back to the manual for me then where everything is as clear as mud to me particularly when Magix offers this statement at the end
• Movie Studio

  37 answers, most recent on 9/5/2022

  RE: Video quality very bad after export /MAGIX MOVIE EDIT PRO PREMIUM
  @Banani I have tried some other bitrates before you replied and it is a pretty big differince. It still is not as sharp as the original raw file, but I think that would be impossible. The 32000 and 60000 kbps would be average and maximum then? I
• Movie Studio

  37 answers, most recent on 9/5/2022

  RE: Video quality very bad after export /MAGIX MOVIE EDIT PRO PREMIUM
  @Banani Hi and welcome to the forum . . . . After the export the video gets very blurry, sharpness is gone and quality just reduced alot . . . Video: H.264; 2704x1520p; 29.97 frames/s; VBR 6000 kbit/s; hardware encoding . . . . That is not
• Movie Studio

  37 answers, most recent on 9/5/2022

  Video quality very bad after export /MAGIX MOVIE EDIT PRO PREMIUM
  Hello everybody,I am experiencing some big change in the quality when exporting a video file using Magix. After the export the video gets very blurry, sharpness is gone and quality just reduced alot. I have been using Magix Movie Edit Pro Premium a
• SOUND FORGE

  One answer, on 7/28/2020

  RE: Version 13 saving as wav files
  I cannot duplicate the behavior with the AAC files I have. They sound pretty awful, but that is expected at that low res. Does this occur when rendering to a more 'normal' PCM file setting (48k/16 for instance).Suggestions to try- Enable "Always
• Movie Studio

  29 answers, most recent on 8/3/2020

  RE: Easiest video format for the software to work with
  Graphics card: Onboard, min. resolution 1280 x 1024, 512 MB VRAM and DirectX 11 support (recommended: Intel Graphics HD 520 for MPEG2/AVC/HEVC) It is really unfortunate that the specification wordings are really not clearly expressed. For me, an
• Movie Studio

  29 answers, most recent on 7/10/2020

  RE: Anyone captured a Zoom session?
  Hi Ray.   Yes, I'm using Win 10 Pro. After installing OBS frankly my initial impression was rather negative. That crowded main screen dominated by animated videos of itself seen through ‘infinite mirrors’ didn't help. Tried to insert screenshot
• Photostory

  6 answers, most recent on 6/27/2020

  imported photos too saturated
  So I edit my raw files in lightroom, export to jpegs, import the jpegs to photostory deluxe (PSD) and the imported jpegs look way too saturated and sharp compared to how they look in lightroom. Is there some colorspace setting or effects option in
• SOUND FORGE

  4 answers, most recent on 6/25/2020

  RE: Open mp3 files with errors.
  I do not recall ever experiencing that behavior. Try changing the 'Proxy' setting in "Options> Preferences> General> Always proxy compressed formats". You may also try experimenting with the playback buffering setting: "Options>
• Movie Studio

  58 answers, most recent on 6/20/2020

  RE: Movie Edit Pro is NOT using my graphics card!
  @DominikStrycharski Thank you for the file. It played without any problem in my default video player, Cyberlink PowerDVD 17. I then opened it in MEP Premium, 19.0.2.58; the file "played" but nothing was seen in the Program Monitor! (Unknown reason,
• Movie Studio

  3 answers, most recent on 6/10/2020

  RE: Import from SlingStudio?
  @John-Butler6952 Hi, Perhaps you can explain more of how you intend to use SlingStudio and how you think that you would use MEP (or VPX) in the process. I presume it would be for post-production. As best I can figure, SlingStudio is mainly for live
• Movie Studio

  12 answers, most recent on 6/15/2020

  RE: Magix freezes when going to Program Settings
  @CubeAce Hi Ray, No, only C: is involved. I have only C: as partition, but also some mobile devices (USB, SD card etc) plugged with data (raw video). However, I copy all data I am using locally, so that should not be an issue. I will try again with
• SOUND FORGE

  9 answers, most recent on 5/29/2020

  RE: Copy and past one audio channel to two?
  @rraud Thanks for this. I agree with you that editing a mono signal is easier, I just need to figure out how to make the device record as mono and and not stereo when using a mono (shotgun) mic. My work flow is as follows, when recording interview
• Other products

  4 answers, most recent on 5/25/2020

  RE: not all pictures showing up in data base
    Hi You are correct in that the 'official list' does appear to be short of a few image formats, PM does support some RAW formats eg NEF, CR2/3 DNG never really caught on with camera manufacturers and has been diminishing in popularity since about
• Movie Studio

  22 answers, most recent on 5/27/2020

  RE: Optimum Video Format for Editing and Export...?
  @yvon-robert @Scenestealer @CubeAce Hi It's not actually a file compatibility problem, just a question of the right intermediate format to employ to get from AVI to MP4 via MEP. And my Pinnacle days are over...(!) I uploaded the tapes some years
• Movie Studio

  11 answers, most recent on 5/22/2020

  RE: Buzzing audio for imported AVI files
  8mm camcorder & FireWire Application to capture AVI. Here is Text View:   GeneralComplete name                            : D:\Video\Raw\2020\Created MP4\10271994_03071995.aviFormat                                   : AVIFormat/Info