• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  Just woke up so barely conscious thoughts 🥱 ... Every person under 25, their first phone will have had at least a half decent video/camera, kids start filming very young.. lets say 10-16yrs old, they can't afford to buy video editing software nor to
• SOUND FORGE

  8 answers, most recent on 8/31/2023

  RE: Sound Forge Audio Studio 10 on Windows 10
  I have same problem. Asked for Sound Forge Audio Studio 10 is requiring me to update registration, even though the product is already registered, and when I click ok to begin registration and click "yes" to Windows 10 requiring administrative
• Movie Studio

  One answer, on 2/8/2024

  RE: Tried to buy a Codec got a Code but it doesn't work
  @Fergal1 Hi . . . . It looked for a computer ID . . . . There are 2 potential causes: If you still have both MEP 2015 and 2021 installed on the computer - attempting to activate the codec in wrong version?  Not copy and pasting the whole code,
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  @MME007 Hi Marc Your monitor has a Refresh rate range of 56 - 76Hz, it also has a very wide range of resolution settings from 480p up to its native resolution 1440p. I am beginning to suspect this may be a Windows issue - possibly the driver, or you
• Movie Studio

  43 answers, most recent on 7/18/2024

  RE: Can not trim or delete portions of audio
  Ah, I knew it was here someplace, but it requires another 3 weeks of study and kind of want to get something going. That button at the bottom of the preview window does nothing. it is "split" only. I don't want to split, I want to cut of dead air at
• Video Pro X

  10 answers, most recent on 8/23/2024

  RE: Windows O.S. will be upgraded in late 2025
  @robbiedaug Hi . . . . Isn't that usually the beginning of the end of an existing operating system? . . . . That depends on what you mean by 'end of'. It does not mean Windows stops working and cannot be used. There are a few users here in the forum
• Movie Studio

  34 answers, most recent on 11/26/2025

  RE: MP4 audio going out of sync
  ok so i have an update.. I AGAIN started from the beginning. here's what i learned.. with MS2025 itself installed on a very "bare system fully updated" i can capture a 2 hour video using a dazzle dvc100 with no issues. the captured video will play
• Movie Studio

  33 answers, most recent on 3/6/2025

  RE: Odd Autosave Behavious with MS 2025 version 239
  @me_again Hi, I've been ignoring the 239 update,, MMS was open so I created a random project with half dozen files, saved it, set auto save to 1min, the screen flashes very quickly roughly every minute. I closed MMS, it asked me if I wanted to save
• Video Pro X

  12 answers, most recent on 10/25/2025

  RE: ProX will not write to DVD DL discs
  @rickduley Hi Rick, My method of creating DL Discs from VPX footage is to NOT attempt the burning in VPX! For me, this has been the case for several versions of the software. The reason for this is that DL Discs require a nominated "split point",
• Movie Studio

  10 answers, most recent on 2/21/2025

  RE: Bluray playback issues
  @cocobacon Hi . . . . This all happened after the upgrade to Studio 2024. The problems have occurred on 3 different bluray players, all of different brands and ages. The only way I've been able to get back to playing is to eject the disc and
• Movie Studio

  14 answers, most recent on 4/8/2024

  RE: upgrade advice - movie studio suite 2023 to movie studio suite 2024
  My thoughts on this. I use several different programs, in addition to light gaming. I look at the overall needs of the programs, and decide on the hardware to use. I also consider what upgrade paths in the future that I have. With AM4, the upgrade
• ACID

  5 answers, most recent on 6/25/2024

  RE: Upgrade won't install C++ Redistributable
  My machine is running Windows 11 with 23H2 x64 update installed When I try to upgrade from Acid Music Studio version 11.0.7 (Build 18) to version 11.0.10 (Build 21) I get error messages: The following components are required by this
• Xara Designer Pro

  4 answers, most recent on 6/17/2022

  [Solved] Program update via XARA Update Service won't complete!
  Hey there fellow Xaronians, I'm beginning to freak out because my access to updates is about to expire and I'm several iterations behind. I'm running version 18.0.5.62892 and been trying for weeks to update to the available 19.0.0.64291, only Xara's
• SOUND FORGE

  20 answers, most recent on 5/23/2024

  [Solved] Issue with Sound Forge Pro 16 and scripting
  I was hopeful that the new version of Sound Forge would have overcome the bug that appeared in version 15 after build 64. Basically various scripts that compile correctly do nothing when they are run. For example, here is a script I have been using
• Photostory

  2 answers, most recent on 3/29/2022

  [Solved] Intro - Outro Annimations
  Hello, I am using Photo Story Deluxe version 2022 with Windows 10. I have added Intro 2013_traveling_intro_hd into the beginning of my slideshow from the templates menu. The issue I am having is that I can't cut out the word "Intro" and replace it
• Video Pro X

  13 answers, most recent on 3/26/2022

  [Solved] Major problems with my Video Pro X 12 copy [SOLVED]
  Hi everyone, I've been using Vegas Pro 14 for quite a while, but for some reason my copy of Vegas couldn't use my GPU for playback nor rendering. I got Video Pro X 12 a day ago, hoping that it would've used my GPU at full potential, but I've met
• Music Maker

  27 answers, most recent on 3/16/2022

  [Solved] Patch 30.0.5.46 for Music Maker Premium
  It is now out the new patch, 30.0.5.46...I am trying to download it through the button in the main screen of the software but it is taking ages and then suddenly stops and obliges me to start again from the beginning.Anyone has a direct link to
• ACID

  13 answers, most recent on 1/1/2022

  RE: [Solved] Where is the Tempo (BPM) stored in an MP3 file?
  @Stoli I modified the script. Now you can choose a folder where your files are located. Sound Forge will try to open each file in the folder and all its subfolders and try to read out the ACID BPM value and try write it in the FourCC BPM-Tag.   Be
• Photostory

  6 answers, most recent on 12/23/2021

  RE: [Solved] What happened to my ability to edit individual photos?
  @Bill-Stewart Hi . . . .In Timeline mode, I see each of my slides in a format that looks almost like there is another row beneath each slide. This lower "row" is not very high and seems to indicate which slide I'm examining within the slides of my
• Music Maker

  27 answers, most recent on 9/23/2023

  RE: [Solved] Song Maker AI Templates and Functions
  @David-Barselow Here are some screenshots. I think the easiest way is to create a copy of a template that is already done. For example your could copy the "80s - Absolute 80s.xml" and just rename it to "My template.xml". Then open the file in a text
• Music Maker

  7 answers, most recent on 1/13/2022

  [Solved] Launching Music Maker 64bit causes windows 10 to shut down.
  This happened when I changed/added a VST location in the last settings tab. Right then windows 10 went to the shut down screen and my computer turned off. I uninstalled Magix Music Maker 64bit and continued to use the earlier version that was still
• ACID

  3 answers, most recent on 11/8/2021

  RE: [Solved] Return to 4/4 time, please?
  @Michael-Warren That is a fairly common beat based ruler that is used in many different DAWs. It always starts with bar (= measure) 1, beat 1. This means 5.1 shows the start of bar 5 beat 1. If you change the time signature the number of beats per
• ACID

  3 answers, most recent on 11/8/2021

  [Solved] Return to 4/4 time, please?
  I have attempted to speak to Magix and Acid to express my feelings about changing the time signature, from 4/4, to 8, 16, 32, to this ridiculous 5.1, and etc. I do remember that anyone would have been failed from music class, for not using the
• Music Maker

  One answer, on 11/1/2021

  [Solved] Start and End Marker to small to drag or adjust - Yellow Bar at top
  I am not able to drag or adjust the yellow bar at the top to extend the playback area. Also instead of playing from where I set the red line, the song now starts from the beginning and plays to the red line. I can't find a single article on this