• Movie Studio

  22 answers, most recent on 10/6/2022

  RE: Where did my Zoom "toolbaar" disappear to?
  @DBoydNL The last version of MEP 2021 was 20.0.1.80. I suspect that your version is missing that "80" patch. Try an update using Help>Update online, but be careful the program doesn't send you down the path of changing to the next version. I am
• MAGIX

  No answers, created on 11/22/2022

  [Closed] Patches: Movie Studio, Video Pro X14 and Photostory deluxe 2022-11-22
  Dear community, we keep on working hard on our softwares and have just released new patches for Movie Studio 2023, Video Pro X14 and Photostory deluxe 2023! Movie Studio 2023 (22.0.3.167), Video Pro X14 (20.0.3.176) and Photostory deluxe 2023
• Movie Studio

  64 answers, most recent on 11/3/2022

  RE: Anyone uploading the 2023 Movie Studio ?
  @CubeAce Hi Ray, I still believe that getting it right at the time of taking the video as it really cuts down on post production That definitely is key, in more ways than one. I miss my video camera - the connection between the flipout monitor and
• Movie Studio

  22 answers, most recent on 10/6/2022

  RE: Where did my Zoom "toolbaar" disappear to?
  @DBoydNL The Keyframe area is at the bottom of the Media Pool. It is the width of the Media Pool, not the width of the Timeline (or Project Window as Magix calls it). This is documented in the manual. Resizing the keyframe area is not documented, or
• Movie Studio

  15 answers, most recent on 9/13/2022

  RE: MMS 2023: Camera/Zoom Shot - Keyframe Buttons Permanently Greyed Out
  @AAProds Strange. I tried both video and image clips. Doing kf's in SPR then switching to Camera/Zoom and adding kf's using the zoom box worked fine as well. There must be something else going on. Did you try a new project? John CB
• Photostory

  21 answers, most recent on 12/8/2022

  RE: storyboard cursor problem
  @Asparuh-Asparuhov Hi, I took another look at your video. The timeline looks suspect as I see some very long transitions and very short image durations. I noticed that a user on the French forum had a similar problem. It looks like some images
• Movie Studio

  43 answers, most recent on 11/18/2022

  RE: Is MS 23 still the same terrible interface as they tried in MS 22?
  @Reyfox @CubeAce Hi, When Magix introduced the Update Service, the process changed. If you purchased/upgraded to a new version that kicked off the Update Service for you, then you would likely have been able to upgrade to a newer version when it
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @AAProds Hi Al. That file has been videoed in portrait orientation. Did you turn it 90º anticlockwise as @nicolesharp100 did for export? That has turned out to be a bit of a pain to do in VPX 14. I thought I would just be able to use one axis but it
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @nicolesharp100 Hi . . . . Simply loading the video into Video Pro X14 and then exporting it as HEVC with the best possible settings (for a 60 MBd video) will reproduce the compression artifacts. . . . . Why are you still exporting at 60Mb/s? As
• Movie Studio

  30 answers, most recent on 11/6/2022

  RE: Quality export lower than Go pro Quick
  @Romain-TOMBOIS, @CubeAce Hi Here is a comparison export of the GoPro sample in MMS 2023 showing the original video, 2 exported versions at 59.94 fps HEVC 60000 kb/s target (average) bitrate max 65000 kb/s IBBP Level 5.1, one with and one without
• Movie Studio

  22 answers, most recent on 10/6/2022

  RE: Where did my Zoom "toolbaar" disappear to?
  Thanks Gid, Now I know what that toolbar is called: "Keyframe timeline". And you are correct, it has always appeared as soon as I selected "Camera and Zoom movement" (again: translating my menu from my Dutch version), which is the effect you have
• Movie Studio

  32 answers, most recent on 10/18/2022

  RE: "Wrong" 4:3 images should have been 16:9 to fil TV screen
  @FF22 Hi For the titling issue try resetting the progam back to its default settings - File, Settings, Reset program settings to default. . . . . I can delete the "phantom" title and create a new one. A tedious venture but it seems to be the only
• Movie Studio

  16 answers, most recent on 3/15/2023

  RE: animating a video or a picture in/ on a background video or picture?
  @kate-m Hi Kate. My tinnitus is really very low in the background. On a day to day basis it only troubles me when I either have time to think about it or realise it's there. It has never been a real distraction and mainly in the 12kHz region. Like a
• Movie Studio

  32 answers, most recent on 10/18/2022

  RE: "Wrong" 4:3 images should have been 16:9 to fil TV screen
  @FF22 Is there a way to select an aspect ration of 16:9 or do I have to eyeball it? In the Section effect box, you can choose the desired crop box ratio: This will teach me to NOT going 4:3 originally. I also have to remember that shooting video in
• Video Pro X

  42 answers, most recent on 9/25/2022

  RE: Question regarding video upscaling
  @jak.willis Hi, a video or picture image is made up of tiny dots called pixels, when you upscale an image those pixels get spread apart & would leave gaps but your software fills them in using the nearest pixels, Any upscale of a video/picture
• Video Pro X

  42 answers, most recent on 9/25/2022

  RE: Question regarding video upscaling
  @jak.willis Hi, a video or picture image is made up of tiny dots called pixels, when you upscale an image those pixels get spread apart & would leave gaps but your software fills them in using the nearest pixels, Any upscale of a video/picture
• Movie Studio

  43 answers, most recent on 11/18/2022

  RE: Is MS 23 still the same terrible interface as they tried in MS 22?
  @browj2 Hi John. I checked my Magix account again and it turns out I have not lost the use of any previous version of VPX but only of MEP 2020. All Humble Bundle activations went as new purchases. My preference would be to re-install VPX 12 if I
• Movie Studio

  32 answers, most recent on 10/18/2022

  RE: "Wrong" 4:3 images should have been 16:9 to fil TV screen
  THANKS. I've been playing and I think most of my questions below have been answered but will need more time to play. I think I even like how some of the PORTRAIT images have cropped to 16:9 Horizontal. Does not seem to affect mp4 video segments. I
• Video Pro X

  7 answers, most recent on 9/22/2022

  RE: Can I have a video crop, follow a tracked object?
  @K-Wood Hi, What I love about these tutorials and effects is how good and appropriate the underlying clip is to make the effect work simply. Note the comments in the AE tutorial: Shoot with a high shutter speed Try to keep your main object in the
• Video Pro X

  6 answers, most recent on 9/23/2022

  RE: SOLVED! Locked on absolute object tracking in VPX. Super easy.
  Comparison using Gid's bird in MMS 2023. I used the Mercalli 5 plugin. It is a shame that Section doesn't work on trimming the black sides away from the K-Wood method. While I can crop them away on the timeline, they re-appear in the export. Using
• Movie Studio

  26 answers, most recent on 9/25/2022

  RE: Vegas video Stabilisation not working in Movie studio 2023.
  Hi . . . . nothing happens i.e. shaky videi remains shaky . . . . That is quite likely if the degree of movement requiring stabilisation is too much for the effect to handle, the stabilisation applied is too excessive, as shown in the example below,
• Movie Studio

  10 answers, most recent on 10/6/2022

  RE: Zoom and hold image
  @FF22 Hi, did you try using keyframes on Size/Position/Rotation? Hold Ctrl & use the mouse wheel to zoom out on the screen, (you have to deselect the media on the timeline to make that work, (I always forget to click off the media 1st 🤦‍♂️👴😂).
• Video Pro X

  18 answers, most recent on 8/26/2022

  RE: Can resolution be improved on this short nighttime video?
  This is that 3gpp clip zoomed in, no effects or sharpening, I don't think there's lot of information there to enhance, maybe someone will get a better result,
• Movie Studio

  22 answers, most recent on 10/6/2022

  RE: Where did my Zoom "toolbaar" disappear to?
  Ray, Thanks for your input. As I said before, I don't do video editing often enough to have discovered things like "default layout" or "templates". I understand templates from my extensive use of them in Word, but at this pace of using VDL I kinda