• Audio Cleaning Lab

  3 answers, most recent on 5/8/2020

  RE: MAGIX USB Phono Pre Amp 2.0
  Paul, the MM/MC switch selects whether the pick-up cartridge you are plugging in to the PHONO IN RCA sockets is a Moving Magnet (MM) or Moving Coil (MC), literally referring to the internal mechanism inside the phono cartridge, and thus its output
• Movie Studio

  15 answers, most recent on 5/2/2020

  RE: vhs capture with green line at bottom
  @mark-perry Hi Mark. It's always good to give as much information as you can. A quick internet search showed that the Vidbox comes with its own software, so the first question would be does it work OK with the supplied software? If it does record OK
• Movie Studio

  32 answers, most recent on 4/30/2020

  RE: DVD reburned from imported DVD won't play!
  @k9vet It is always a good idea to keep old programs running if you can for older tech products. It's not always practical though as it is not always forwards compatible. Is anyone still using an analogue TV set? Who listens to am radio? I
• ACID

  2 answers, most recent on 4/27/2020

  Using Acid Pro 8 - Possible to install on multiple machines?
  Is it possible to install Acid Pro on multiple machines? I would only be using on one machine at any given time. This is for home use only. Basically I have a desktop that I primarily use for music, but I also have a bunch of music equipment in the
• Movie Studio

  34 answers, most recent on 4/21/2020

  RE: Lowering volume of MAIN audio track to allow another to predominate
  @johnebaker Hi John. I shut my PC down at the end of each day and turn everything off at the mains as I have an awful lot of other equipment that rely on external power supplies that I don't like switched on. The room I use has its own dedicated
• Movie Studio

  66 answers, most recent on 7/2/2020

  RE: How can i make Movie edit pro plus work faster?
  @Former user I've gone through so many bits of kit through the years and still have stuff I've never used and one or two bits in need of attention. That's the problem with accumulating too much kit. The thing I can't get on with are some of the
• Movie Studio

  50 answers, most recent on 4/24/2020

  RE: Is my result a typical benchmark? (UHD 630 HW encode)
  @Craigster First I'll apologise for the length of the prescribed reading material that John has pointed to but it is an interesting and valuable read. (In my opinion). As to your last question (6) I thought that as well at first but the difference
• Movie Studio

  50 answers, most recent on 4/24/2020

  RE: Is my result a typical benchmark? (UHD 630 HW encode)
  @Craigster First I'll apologise for the length of the prescribed reading material that John has pointed to but it is an interesting and valuable read. (In my opinion). As to your last question (6) I thought that as well at first but the difference
• Movie Studio

  6 answers, most recent on 4/16/2020

  RE: importing iphone video picture is blank
  @Taildragger7W New phones will quite often now record video using a variable frame rate to safe on memory space and most editors can't handle it. Look in the settings of your phone and change the recording settings to a constant frame rate for
• Movie Studio

  12 answers, most recent on 3/27/2020

  RE: Issues with new version: Losing pointer sync, drop out of sound track
  @FF22 Hi. It could be that your processors GPU only supports Intel® HD Graphics 4600 and the specs for your version states that Intel 520. While a Graphics processor isn't actually needed as it can all be rendered in software it may make the machine
• Off topic

  67 answers, most recent on 8/23/2020

  RE: Suggestion and ideas
  @Paulo.Costa Hi . . . . me registering my Credit Card to buy the unlimited Loops of the MMM2020 Promotion, it is discounted at the time on the credit card, or just at the end of the month . . . . For information on the offer contact sales using the
• Rescue Your Videotapes!

  One answer, on 3/22/2020

  RE: MAGIX USB-Videowandler 2
  Google Translate: During installation, MAGIX Save your video cassettes v.4.0 and MAGIX USB-Videowandler 2 on a DELL laptop with Windows Vista installed without a problem, but after replacing DELL equipment with a newer one with Windows 10, there was
• Movie Studio

  4 answers, most recent on 3/5/2020

  RE: Stitch 360 videos from 4 feeds/ views
  @andy-o Hi Andy. Actually I don't think it say's that at all. Read it carefully. It's giving examples of what is possible to do depending on equipment. Only the paragraph above the one you mention refers to using MEP on a different type of
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  @Richard-Schmitter I think you are looking at it from the wrong direction Richard. Updates to products and operating systems are mainly keeping up with alterations made to new equipment and alterations to existing software to keep up with the
• Video Pro X

  4 answers, most recent on 2/17/2020

  RE: Why these limitations - improvement suggestions
  @Lowbow As per Jeff's comments, even if you raise a ticket with Magix, you will have to demonstrate much better your problems. See the bug list and some of the videos. Even with all of this, we have had very little action from Magix. Rendering Out
• Movie Studio

  One answer, on 1/25/2020

  [Closed] Refunds?
  Hello! I recently purchased the VEGAS Movie Studio 16 Platinum. As I was beginning to familiarize myself with the editing software, my laptop crashed multiple times and I've come to realize it is not equipped to run this software. I was wondering if
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  @Andrew-Thompson Hi Andrew. Hardware only really ever needs changing if it can't cope with new projects because either you have new equipment that can't be read of converted by older software or the processing power of the PC. Other reasons might
• Movie Studio

  26 answers, most recent on 1/1/2020

  RE: Media files shows WAV data, but top of screen reads "empty"
  I just got a totally pissed off call from the producer at Netflix whose film I am supposed to be editing right now with a delivery date of January 7th, 2020. A date which, unless I can get back to editing today, I can't make. Netflix is going to
• Movie Studio

  8 answers, most recent on 12/11/2019

  RE: Hvec cost now? really...
  @sksoon You can import any files you like into MEP and have them play back as long as the file type is one that MEP is able to import. HEVC is one of them. The codec you are paying for is for exporting and therefore an encoder, not decoder which is
• Photostory

  18 answers, most recent on 3/14/2020

  RE: playback limited to area restriction
  I Am following the steps as they appear in the burning process.See Earlier post which show the dvd equipment which it will not run on. When you proceed to burn a disk Photostory walks you a series of steps, which I am following. Can you enlighten me
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @CubeAce Hi Ray "To my surprise the system is now much more responsive" Surprise, surprise! I think we discussed doing hardware related updates recently and someone mentioned "if it isn't broke don't fix it" or "never change a running system". 😖 As
• Music Maker

  8 answers, most recent on 11/8/2019

  RE: "Reset VST plug-in information" not working
  Hi there, First things first: In order to get any meaningful effect out of the button in the program settings to reset the VST plug-in information, you will *need* to have version 2020 (28.x) installed. This function was buggy/incomplete before, and
• Movie Studio

  10 answers, most recent on 11/2/2019

  RE: It does not export in 4k and if it does the option is not easy to see
  @Fern-Marn Lets look at the specs of a machine needed to run MEP 2013.   Manufacturer Magix Entertainment System Requirements OS Required Microsoft Windows 7 (32/64 bits), Microsoft Windows Vista (32/64 bits), Microsoft Windows XP, Windows 8 (32/64
• Music Maker

  6 answers, most recent on 10/21/2019

  MIDI Direct Sound mute (Update 28.0.1.19)
  Hi! I'm a new user trying to figure out Magix Music Maker. I first got my hands on it back in December 2017 when a few related items were on the Humblebundle, but I didn't really try it as I didn't have the MIDI equipment I wanted. Fast forward to