• Samplitude

  One answer, on 5/16/2021

  Yes, this appears to work with samples, but it won’t work properly wit
  Yes, this appears to work with samples, but it won’t work properly with the MIDI Interface.  Although it’s registering the notes with the Magix low latency Asio 16 driver, there’s no sound, when recording or playback. I can only use a USB Codec,
• Music Maker

  13 answers, most recent on 5/15/2021

  RE: Unable to Record Instruments
  @Brooke-Harvey WASAPI will not give you the features you want. What do you see, if you select Magix Low Latency and click on "Advanced..."?
• Music Maker

  One answer, on 5/12/2021

  RE: Magix music maker audio problems
  @DeathTbh Hello! Usually you need to select an ASIO driver in the program settings. This driver needs to be selected if you want to work with audio + MIDI and hear the virtual instruments playing MIDI notes. The other drivers work fine if you just
• Music Maker

  8 answers, most recent on 5/11/2021

  RE: VST instruments
  @Viktor-Kniesz  You need to select an ASIO driver. Wave will not give sound when recording, only ASIO does that. A screenshot of your settings would be helpful. Maybe you have a new kind of sound chip. Some sound chips don't work well with Magix Low
• Music Maker

  One answer, on 5/9/2021

  I can't run other audio, while Magix Music Maker software is running
  I'm trying to play audio on iTunes, YouTube and other applications on my desktop. While simultaneously using my Magix music maker software, I payed $59.99 to update. Every time I run the software, an icon saying "Low Latency 2016 - Music Maker"
• Music Maker

  One answer, on 4/29/2021

  RE: No input audio detected on music maker 2017 premium steam edition
  @BUNNIE Is it an USB microphone? These are always problematic. Can you please make a screenshot of your audio settings in the program settings and your recording settings? Usually you would select an ASIO driver like Magix Low Latency and then
• Music Maker

  5 answers, most recent on 4/27/2021

  RE: Why software is crashing or freeze? i have a good setup!
  @Djhusmx Thanks. I looked up Avid Mixbox and the device and its drivers are very old which could be the cause for the instabilities but I'm not sure. If you change ASIO the drivers to Magix Low Latency and activate your Mixbox device and its inputs
• Music Maker

  2 answers, most recent on 4/18/2021

  RE: No sound from virtual keyboard
  @Frederic-Thompson Please go into the program settings and select an ASIO driver as your audio driver. Only if you select an ASIO driver you will be able to hear live input. This is how I set it up on my laptop. I selected an ASIO driver (Magix Low
• Music Maker

  6 answers, most recent on 4/16/2021

  RE: I want my money back
  @Rob-Bowden Write a mail to shop@magix.net and ask for a refund. Or you could show us your program settings with a screenshot and we can give advice. Usually you need to select an ASIO driver (Magix Low Latency) and set it up for your device via the
• Samplitude

  9 answers, most recent on 4/2/2021

  RE: recording directly from bass guitar input
  @Andy-Rankin I downloaded from their website but its not showing there. Downloaded what, from whose website and where is it not showing, and what is "it"??? Looking at the Behringer web pages for your interface I see quite a range of downloadable
• Samplitude

  9 answers, most recent on 4/2/2021

  RE: recording directly from bass guitar input
  @Andy-Rankin Maybe install the ASIO4ALL driver and select that inside Music Studio. It is nearly the same as Magix Low Latency. But sometime devices don't show up in Magix Low Latency but they show up in ASIO4ALL.
• Samplitude

  9 answers, most recent on 4/2/2021

  RE: recording directly from bass guitar input
  @Andy-Rankin Thanks. Please try some other option. Select Magix Low Latency. Click on Settings Click on the wrench icon Activate all inputs and outputs of your Behringer interface that should be listed there. Check that the driver outputs and
• Music Maker

  5 answers, most recent on 3/16/2021

  RE: Instruments do not load after updating Music Maker Premium 64-bit
  @ANDRZEJ-FRCZ The MIDI keyboard should work if you select an ASIO driver in the program settings and configure it. For example if you select Magix Low Latency as an ASIO driver you can set it up something like this: Be also sure to select your MIDI
• Music Maker

  2 answers, most recent on 3/15/2021

  RE: Volume problems.
  @Mikeon7 Hi Mike. You talk about using a USB interface. If you are using anything other than the inboard RealTek chip you will have to activate it via the Magix Low Latency 2016 ASIO driver which should appear in the task bar when Magix Music Maker
• SOUND FORGE

  No answers, created on 3/12/2021

  Sound Forge Audio Studio 13 Not working
  Hello, I recently had activation issues with sound forge 13 but Fortunately, I was able to fix it by re-installing Soundforge, So just yesterday and today I get this error below: when i launch Soundforge 13, I also installed software FL studio that
• Music Maker

  One answer, on 3/11/2021

  RE: Not able to Use Scalar 2/Kontakt
  @Ashwin-Mahadev Please check in your program settings that Music Maker is using an ASIO driver like Magix Low Latency 2016 or else you will not have sound. Scaler 2 will not work in Music Maker because there is no MIDI routing, except maybe for the
• Music Maker

  One answer, on 3/11/2021

  RE: I have no sound on music maker when I make music
  @stig-christensen Please check your audio settings inside the program settings. You can select drivers like Direct Sound, ASIO, WASAPI etc. Try one and configure it. For example, I use ASIO with Magix Low Latency 2016 and this is how I have it
• Music Maker

  49 answers, most recent on 3/12/2021

  RE: Music maker
  If this all doesn't work, please try ASIO4All. Download it from here https://www.asio4all.org/ Install ASIO4All. Restart your Laptop Start Music Maker Go to Program Settings Change Magix Low Latency to ASIO4All Click on "Advanced..." Try this:
• Music Maker

  49 answers, most recent on 3/12/2021

  RE: Music maker
  @Maria-Urbina That is correct. Please use Magix Low Latency 2016 Out (1+2) and then click on "Advanced..." and try to activate the devices that are shown on the screenshot: Realtek HD Audio Mic Input and Realtek HD Audio Output with SST > Out: 2x
• Music Maker

  49 answers, most recent on 3/12/2021

  RE: Music maker
  The magix low latency 2016 out (1+2) that’s the one I have.
• Music Maker

  49 answers, most recent on 3/12/2021

  RE: Music maker
  @Maria-Urbina I found this: https://www.asio4all.org/index.php/help/sst-issue/ This seems to be an ASIO4All driver problem, or more like an Intel audio problem. Magix Low Latency 2016 is a variant of ASIO4All. That why it isn't working.
• Music Maker

  One answer, on 3/4/2021

  RE: music maker won't let me use my microphone.
  @chasmin-stover You need open the program settings, select ASIO as a driver (for example Magix Low Latency), then click on the "Advanced..."-button. The Magix Low Latency configuration opens. Click on the wrench icon to show all options. In the left
• Samplitude

  One answer, on 3/3/2021

  RE: Samplitude Music Studio 2021 won't play
  @Edward-Baumann You need to setup your audio drivers. Just select Magix Low Latency. Then click on "Settings" to activate your audio device. In case you have opened the advanced settings:
• Music Maker

  8 answers, most recent on 3/2/2021

  RE: Recording from positive grid spark amp
  @Doron-Golan Thanks for your screenshots. On your first screenshot it looks like you have selected your Amp as an playback device. This, of course, wouldn't work. The second and third screenshots show it as an input device but you cannot hear