• Movie Studio

  31 answers, most recent on 6/27/2024

  RE: Where did my audio go?
  @Eric-Elliott Hi Eric . . . .  I can't do voiceover separately and then try to sync it up, that is impossible. I need to do it while the image or video is on screen otherwise I'm talking about apples while oranges are showing. . . . . . A change of
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @AAProds Hi Al, I sneaked in a couple minutes between washing dishes and getting back to painting the garage. For sound, as I mentioned, I recorded using the camera/transfer box setup which records audio to the camera, but I plugged in the line-out
• Video Easy

  No answers, created on 1/12/2023

  transmission problems
  ten minutes (VHS) transferred to the computer, only gain 3-4 minutes when I edit/finish the film. the rest has disappeared.
• Movie Studio

  20 answers, most recent on 2/6/2025

  RE: Looking to use this OPENING in newest video.
  @Reyfox @FF22 @Gid @browj2 @johnebaker Hi John. Well, I have used the Boris Particle Illusion program for as long as there has been a free download version and Boris Titler has the same workflow so personally I didn't find it that difficult to use.
• Movie Studio

  30 answers, most recent on 3/8/2024

  RE: MMS 2022 Suite, Slideshow Maker
  @Greg123 Hi Greg. A 4:3 screen ratio is based on the 35mm film format which was a traditional screen ratio for movie and still images. All my Digital stills cameras do 4:3 and my full frame ones have 35mm sensors. There will always be new screen
• Movie Studio

  50 answers, most recent on 10/20/2023

  RE: Help selecting a new PC
  @mikerb Hi Mike, Since you filmed at 50fps, I suggest that you use that for your project and export settings. 2.7k is not an option, so go with 1080. This allows you to do some cropping, especially that done by a stabilizer like Mercalli, without
• Other products

  One answer, on 6/29/2023

  [Closed] choppy video
  ·         Using different cameras all shooting at 60fps 1080hd. Gopro 8, Panasonic hcx900m. canon m50. ·         I edit in vegas 14. Timeline is 24fps, 8 bit setting. ·         Disable resample, best quality, gagassian blur all clicked. ·        
• Movie Studio

  6 answers, most recent on 6/13/2023

  RE: Neat Video Plugin Bug-Incorrect Frame Selection
  @AAProds Greetings Al, apologies but I can't say I've noticed the bug even using the previous version. I've just tried it with the new version and it shows the frame under the play marker that I want, in the centre of the film strip at the bottom of
• Movie Studio

  9 answers, most recent on 2/8/2023

  RE: Adding Multiple Video Effects
  @CubeAce As I have sometimes used say, a speed adjustment, a colour correction, a crop, chroma key, and size position rotation applied to one clip since I started using the software in 2018 I can't see why there would be a tight restriction on doing
• Video Pro X

  65 answers, most recent on 4/7/2024

  RE: VPX prices until April 9, 2024
  @Reyfox Hi, Take a look at the color grading panel in Vegas vs VPX. What colour (Brit/Cdn spelling) grading panel in VPX? I presume that you mean the Brightness/Contrast, Color, and the 3-wheel Color Correction effects, plus the others - Levels and
• Movie Studio

  84 answers, most recent on 5/20/2023

  RE: Benchmark for Movie Studio 2023
  @CubeAce hello, I never work with proxies and if possible without preview rendering.  The options are always turned off for me.  When I load your project, however, the proxies are activated by themselves in the film settings. No proxies have been
• Video Pro X

  5 answers, most recent on 7/20/2023

  RE: Updated ProX14 and cannot burn dvd from previously created image
  Thanks for the response guys. I used the 'Burn dvd from existing disc image' from the file dropdown menu for many years including over 100 dvds for a school filming last Christmas which was after I upgraded to VPX14. It was a very efficient and fast
• Video Easy

  21 answers, most recent on 6/7/2024

  RE: Video Easy no longer recording audio in stereo
  Thank you Ray. Yes, Computers are something, they become obsolete the minute you finish building it. It is impossible to keep up. My rig is about 2 years old, but it is an antique compared to today. I'm somewhat surprised my processor is good enough
• Movie Studio

  36 answers, most recent on 6/11/2023

  RE: Importing video file saved from camera - no audio in Movie Studio
  @Terry-Schmidt, @CubeAce, @Former user Hi Looking at the MediaInfo data the video is very typical of h.264 (AVC) video and AAC encoded audio the bitrates and sample rates are good for this being mobile phone footage. The variable framerate is also
• Video Pro X

  58 answers, most recent on 1/21/2024

  Poor result on still image travelling
  I have a wide panorama (still picture 5536 x 2160). I want to travel on it from the left to the right to give some movement. I first zoom it so that the height fills the screen. When travelling at the expected speed, the result is jerky, not nice at
• Movie Studio

  17 answers, most recent on 6/13/2023

  Progressive to Interlaced Question
  Hello, I have a question regarding progressive/interlaced content. I downloaded an episode of Classic EastEnders from UKTV Play that would have originally been filmed interlaced. However, if I check out the downloaded file on Mediainfo, it states
• Movie Studio

  29 answers, most recent on 5/27/2023

  RE: Cannot see video after import of .avi files
  @Alan-Wade I think the problem is that AVI is a native Microsoft supported / developed file type while Apple iOS doesn't natively support the AVI format or Direct X and the problem I have had trying to run virtual machines within Windows in the past
• Movie Studio

  50 answers, most recent on 10/20/2023

  RE: Help selecting a new PC
  @AAProds Hi Al, I have never understood the hangup with "non-preset" movie settings. Of course 2704 is an option; just create the settings manually:... It's not a hangup. Why complicate things. I just use the standard options as has been pointed out
• Movie Studio

  87 answers, most recent on 4/27/2023

  RE: Video replay speed faster than original loaded video
  Thank you for all your responses. Since all the responses are concentrating on the old (.mov) Video clip I like to point out that the video clip displays just fine when loaded into my older Magix Movie Pro Premium Version 17.0.3.178 on my older
• Movie Studio

  32 answers, most recent on 1/28/2023

  RE: Plug In's For MEP2016 Plus
  @CarpentersMate Hi Mike. Was there nothing the the programs' Effects General options section? I'm sure there was in the 2018 version. That as far as I know was never extra content. Look at my 10:08 reply image for location. Also Templates / Movie
• Movie Studio

  3 answers, most recent on 7/14/2024

  RE: Movie Studio Platinum Upgrade from Using Movie Studio Platinum 14
  Hello,I had gotten an email about upgrading to the new 2025 edition of Movie Studio Platinum. And I had been using the Vegas Movie Studio 14 which I got in like 2017 or 2018. I am a little overwhelmed by how this is laid out. I have even tried to
• Movie Studio

  6 answers, most recent on 8/1/2023

  RE: Movie Edit Pro Titles problem
  Hi Gid, thanks for responding. Information added to signature as requested. This PC is only 4 months old, I replaced my 10 year old PC with a more up to date model especially for using MEP. The spec is very high. I have tried to attach 2 videos. But
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @CubeAce That file has been videoed in portrait orientation.  Ray, I just used Nicole's MVP. The file was filmed in 16:9, according to Mediainfo, VLC Player and MS Films and TV. Nicole has turned it to 9:16 (portrait). How is MS 2023 running for
• Video Pro X

  16 answers, most recent on 4/2/2024

  RE: Camera/Zoom shot key framing greyed out
  @Kraznet Hi, I agree that the keyframes controls should be already available but I think you're over complicating it a bit, You're going to C/Z to zoom or something like that, so click on one of the boxes, that will add keyframes & then click on