• Movie Studio

  25 answers, most recent on 10/22/2023

  RE: Movie Studio 2023 freezing with 4K input
  @CubeAce you have to realise that each new version is produced to take use of the latest computer components and operating system which means moving from older hardware and software configurations to newer versions such as Direct X changes and CPU /
• Audio Cleaning Lab

  6 answers, most recent on 2/15/2024

  RE: Recording through Import Vinyl stops prematurely
  @Ronald-Chin Ok, not sure if the Pentium processor is fast enough for modern audio software and hardware. There is also a 32 Bit version of Sound Forge Audio Cleaning Lab 4 available during install. Did you install both the 32 Bit and 64 Bit
• Sequoia

  One answer, on 7/4/2024

  Recordings just stop - CPU/Hard drive Overload
  Hi all, We are facing an issue with hardware and sequoia for broadcast recordings. Main issues, then we are having more then 64 channel recordings, they just stop out of nowhere with CPU/Harddrive overload. Tho we are ussing Xeon e5-1620 with 64 gb
• ACID

  4 answers, most recent on 3/31/2024

  RE: Help! Acid Pro 11 Won't Open- Crashes at ASIO stage of loading splash
  @TiKkO Hi . . . . Crashes at ASIO stage of loading splash . . . . Looking at your system specs, I would agree with your suspicion that the number of ASIO drivers and hardware options you have is causing the crashing. An option would be to turn
• Movie Studio

  17 answers, most recent on 4/7/2024

  RE: The AV1 codec
  @CubeAce Greetings Ray, that's a good point about the Lossless AV1 but it only happens when I use Nvidia hardware encoding; when I turn HW off then the bitrate settings are respected. Both Handbrake and Xmedia Recode allow Nvidia hardware encoding
• Movie Studio

  5 answers, most recent on 6/4/2024

  RE: What software is recommended for Suite 2024
  @Jennifer-Barnes Hi Are the Intel UHD 630 drivers up to date - the latest version is 31.0.101.2128 available here. . . . . taking 30mins to process a 20min DVD quality film . . . . Assuming you mean rendering and burning to disc or ISO image, this
• Movie Studio

  8 answers, most recent on 3/21/2024

  RE: Add-on compatibility with upgrade
  @cocobacon Hi, Yes. The additional content that comes with MEP/MMS will probably not need to be updated. You will be advised. The additional content is put in a public folder under Video Content. The installation of the program detects whether or
• Video Pro X

  62 answers, most recent on 5/15/2025

  RE: Should I choose Video Pro X or Vegas Pro?
  @ghijohansson No problem. I have those moments as well. Probably more than I care to mention 😅. Your camera is more likely the version in the Brochure then. Still it takes the same image quality just the memory card requirements are not the same and
• Video Pro X

  46 answers, most recent on 1/16/2024

  RE: VPX15, no hardware encoding during BD burning
  @AAProds @Willem-vdfdeJong Hi Al. My mistake. I did get the same response you did when I tried with the Blu-ray option. I do however know the difference between ripping and encoding and FABDVD can use hardware encoding to do that. At least it used
• Video Pro X

  25 answers, most recent on 8/10/2024

  RE: No Hardware Encoding 9:16 ONLY!
  @Liam-Roberts You've given us nothing to work on. What are your system details? What sort of videos do you have on the timeline? Are you using Size-Pos-Rotation/Section to achieve 9-16? What format are you exporting to? I've just done a 9-16 export
• Music Maker

  36 answers, most recent on 12/17/2025

  RE: Need help fixing magix..am losing hope
  ok thers a whole lot going on here. deleting registries is never a good thing. sounds like your just jumping down a huge empty rabbit whole with all this research of likely problems or causes? All that you mentioned doing, its more like, just reset
• Video Pro X

  37 answers, most recent on 11/9/2024

  RE: bug ?? unable to delete keyframe -> from 2nd clip (onwards)
  @Betovalle Hi Rob. I had already tried that. It was one of the first things I tried but thanks for posting anyway. I thought after I had done a fresh instal of Windows that it would have taken. Possibly a hardware conflict somewhere is causing that.
• Movie Studio

  34 answers, most recent on 11/26/2025

  RE: MP4 audio going out of sync
  @ron-griswold If you could give the exact specs of this a very "bare system fully updated" That may prove to be extremely useful. Never confuse the ability to play a file back successfully on any given machine with the ability to edit it. They are
• Movie Studio

  7 answers, most recent on 2/1/2025

  RE: Upon exporting all of my ZOOMS are black on playback
  @FF22 Hi According to your computer specification in your Signature you have: The changing the Device options to CPU removes any non compatibilty with graphics gards (GPUs) and integrated GPUs, the computer has both. Exports do take longer because
• Movie Studio

  62 answers, most recent on 5/4/2024

  RE: System hardware not being utilized
  @Reyfox Hi The RX 6700 charts definitely show the video hardware module is being used. What is export time for the Magix demo project, I know it is a low resolution project 🙁, using the MP4 FullHD 1920x1080 25 fps preset with no changes to any of
• Music Maker

  3 answers, most recent on 9/14/2024

  RE: Very, very slow responding software
  @wodn Welcome to the Magix users forum. Your experience with Music Maker is not common (if it were, these forums would be flooded with similar complaints!) so, in order to help us to help you, please give us a lot more detail about your computer
• Audio Cleaning Lab

  17 answers, most recent on 9/14/2024

  RE: can no longer cut/delete in Sound Forge 19
  @Jon-Baker Sound Forge Pro (or SF Audio) and Sound Forge Audio Cleaning Lab are two entirely different programs. The advice which @rraud gave was for Sound Forge, not Sound Forge ACL. I'm pretty certain the items he lists do not appear in your
• SOUND FORGE

  One answer, on 6/12/2024

  RE: SF 9.0 on Win 11
  @jpetri1993 Can you already record external sources fine? Is microphone access enabled in your Windows security settings? Recording internal sounds depends on your audio hardware or if the computer manufacturer has added the feature. Press the
• Other products

  One answer, on 1/26/2025

  [Closed] Vegas Pro 22 crashes everytime i try to open a project.
  Hi im really desperate. My vegas pro 22 crashes everytime i try to open a project. I remember i used to use vegas pro 20. Then i were stupid enough to get the VEGAS Pro Post 365 subscription which only have given me hell. Since Vegas Pro 22, i
• Movie Studio

  21 answers, most recent on 9/28/2023

  Hardware Encoding for MPEG-4 Export Stopped Working
  I had Movie Studio 2018. It was taking about 3 minutes to render a 1 min video using MPEG-4 under the 'Best' quality. About two weeks ago I upgraded to MS24 and was pleased to see that rendering was completed in 30 seconds or less with hardware
• SOUND FORGE

  3 answers, most recent on 12/19/2023

  RE: Sound Forge Pro 15
  How in the heck does one get the stupid V and P sliders back? I am not sure which volume/pan faders you are referring to... the Volume and Pan timeline automation envelopes or the hardware volume fader? If you want the hardware volume fader, select
• SOUND FORGE

  10 answers, most recent on 11/15/2023

  RE: Not getting any sound levels from my DJ hardware (XDJ-XZ) input.
  @kevin-m3692 Definitely select the XDJ-XZ-ASIO driver. Don't forget to apply the changes after switching the driver. Then you can open the ASIO driver settings. There you should be able to set your input and output. You probably will not have
• Video Pro X

  34 answers, most recent on 2/18/2024

  RE: NVIDIA 4070 issues on most basic video editing work
  Interesting.I had also much more degraded video where images were even more mixed up than this one. I checked the "anti-interlacing filter" option in the export dialog box and it is OFF. I will need to try with this parameter activated. If this is
• Video Pro X

  32 answers, most recent on 12/5/2023

  RE: Canon C-LOG3 files won't open on Video Pro X 15.05.213(UPD3)
  @AAProds @johnebaker wrote: Re-reading the original post, according to the version number in the title of this topic, Video Pro X 15.05.213 was the last patch for Video Pro X8.   If that's true, it needs a new Version. And its hardware must meet the