• Off topic

  43 answers, most recent on 7/1/2024

  RE: Magix Future?
  @Reyfox Hi, As you are aware, user-inspired Pinnacle and VideoStudio/PaintShop Pro forums have sprung up. BTW, I started with Pinnacle Studio and switched to MEP when the future of Pinnacle with Avid was in doubt. I still have Pinnacle Studio 23,
• Music Maker

  22 answers, most recent on 12/18/2022

  RE: Music Maker update 31.0.3.26
  @ralftaro Hi, Thank the team for the "link to own audio recordings in the File Manager." However, there is still a problem. I have recordings all over the place but the File Manager doesn't find the folders under: B:\Documents\MAGIX except as shown
• ACID

  14 answers, most recent on 12/30/2022

  RE: Can ACID Pro Remove Turntable Rumble?
  Well, I adjusted what is visible on the VU meter in ACID Pro, and that seems to have done the trick. There is no sign of the mystery "rumble" or "hum" or whatever the hell it is. Sounds good in Winamp. Sounds good in MAGIX Audio Cleaning Lab
• Movie Studio

  26 answers, most recent on 1/17/2025

  RE: Blu ray disk chapters blank
  Hi, I expect that @karataka has gone away. In any event, thanks for the link to 10 Usability Heuristics (Nielsen Norman). The "closing" business I choose as example, is a failure of heuristic 4: Consistency and Standards. Interesting, but I still
• Music Maker

  17 answers, most recent on 9/16/2023

  RE: joining loops to make 1 loop
  @gjonny Hi, Further explanation after a coffee. The Op wanted to join the loops "so i can slowly make the volume of them lower as they are played." The objective was to be able to adjust the volume over the loops slowly, not join the loops. Joining
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  @Tony-Haack Further to my previous post, there are a lot of factors to consider about audio and getting the narration right is just one of them. The main objectives are: Getting a consistent and appropriate perceived loudness for the overall
• Audio Cleaning Lab

  14 answers, most recent on 3/3/2023

  RE: Import for file type 101 is not possible!
  @M-J-S Magix is aware of this problem for a year now. No solution in sight except using the 32 bit version or an earlier
• Audio Cleaning Lab

  One answer, on 12/3/2022

  When installing Spectral Layer9 program will not replace file \c10.dll
  Can't install Spectral Layer Elements 9.0.10. Erro code 5 and DOES NOT Recommend to skip this installation. Since this won't load, I cannot load Sound Forge Audio Cleaning Lab 4. I still have the Trial Version installed. Is this the problem? It is
• SOUND FORGE

  One answer, on 12/24/2022

  Installing Sound Forge 10 on new computer
  I am trying to install Sound Forge Audio Studio 10.0 on my new Windows 11 computer but the installation fails. The error message says I have no internet connection, although I do. I logged into my Magix account where I accessed the download link and
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @CubeAce Hi Ray,  exact audio editing is also much more precise in Vegas Pro. Easier to not having to cut audio to the frame How do you figure that? Maybe compared to MMS, but not VPX. In both, you cut video to the frame. In both, you cut audio to
• Movie Studio

  296 answers, most recent on 3/29/2025

  RE: [Closed] Feedback on Movie Studio 2023
  Jeff, not sure what to make of it, but all of the iZotope RX plugins from versions 6-10 are labeled as VST3 in the VST FX menu of plugins for Sound Forge Audio Cleaning Lab version 3 and 4. Also, when installing iZotope RX 10 there is no option to
• Movie Studio

  9 answers, most recent on 2/24/2023

  RE: How to edit a track in details
  @CubeAce Hi Ray, First just play the video using Film and TV and record the audio output into the DAW using the Stereo Mix input from your computers sound card / chip You can't be serious. Why not just export the audio from MEP or do a mixdown as I
• Off topic

  43 answers, most recent on 7/1/2024

  RE: Magix Future?
  Disturbing news! Here is more of what is in one of the articles: The company is struggling with the current rise in interest rates – while at the same time dramatically declining sales. Magix definitely came under pressure from competitors such as
• Off topic

  2 answers, most recent on 2/8/2024

  RE: Best Solution for sharpen/enhance VHS export
  @Rickvv Welcome to the Magix user to user forums. Both Magix Movie Studio and Video Pro X include the facility to sharpen any video image. Though one needs to be careful and not overuse the feature or the footage can appear over sharpened and
• SOUND FORGE

  4 answers, most recent on 4/8/2023

  RE: WHERE IS MY CLEAN TAB?
  To elaborate, Sound Forge AS (Audio Studio) has basic restoration tools: 'Audio Restoration' can attenuate din type noise like HVAC and such. 'Vinyl Recording and Restoration', which can attenuate clicks and crackle type sounds.'Cleaning Lab Pro'
• Audio Cleaning Lab

  11 answers, most recent on 11/29/2022

  RE: Will not launch - stuck on splash screen.
  @Reg Ok, if both settings don't work your problem has likely nothing to do with your graphics device. Another user encountered a similar problem some days ago with Music Maker. It also froze at the splash screen. The cause was the automatic VST scan
• SOUND FORGE

  12 answers, most recent on 5/24/2024

  RE: Audio Vinyl Recording files not saving as mp3
  @David-Lay5409 Sound Forge Pro or Sound Forge Audio Cleaning Lab? If the MP3 encoder isn't working properly, it might help to reset the program settings. In Sound Forge Pro this is possible under the File menu. In Sound Forge Audio Cleaning Lab you
• Music Maker

  20 answers, most recent on 5/18/2023

  RE: BEATBOX 2 WITH NEW 2023 INSTALL
  @Jon-Marinella Hi, Soundforge and Audacity are also full featured DAWs, but you isolate a sound clip, or portion thereof, and can edit it as an object .You can trim it, you can add a volume swell to part of it, you can pitch and time alter it or
• Audio Cleaning Lab

  One answer, on 12/12/2022

  Problem when trying to record
  When I try to record I get the following box appear which stops me recording: Audio Input Level too high/low Recording Level L -60 -6 (green) -3 (yellow) 0-Clip (red) R same as for L above Recording time Storage space Wave 24 Bit Stereo 44100
• ACID

  14 answers, most recent on 12/30/2022

  RE: Can ACID Pro Remove Turntable Rumble?
  Okay, this is strange. The rumble has returned. Here's what my process is for getting a vinyl record on to my hard drive. I start by recording the vinyl with Audio Recording Lab. I then use the different tools within the software to clean up the
• Audio Cleaning Lab

  7 answers, most recent on 1/3/2023

  RE: New PC, but I lost my serial number. Options?
  @Leif-Hakansson I'm not sure exactly what you are doing. I just tested this, as follows: Click on the Support header at the top of this, or any other forum page you will see this:Select "Audio" and then "Audio Cleaning Lab" as highlighted  Then you
• Audio Cleaning Lab

  14 answers, most recent on 3/3/2023

  RE: Import for file type 101 is not possible!
  I'm also experiencing this problem, but not with WAV files - with FLAC files. The software can perform operations on these files, but this error message is for the birds and is a constant annoyance. Sound Forge Audio Cleaning Lab 4 ver 26.0.0.23
• Audio Cleaning Lab

  One answer, on 11/10/2022

  Reinstall sofware
  I have Audio Cleaning Lab 16 deluxe. When I tried to start it it failed with error 6. It has worked in the past, but I have not used it for about a year. The only change to my hardware is replacing a hard drive with an SSD drive. I then tried to
• Audio Cleaning Lab

  4 answers, most recent on 9/27/2022

  RE: Cant get audio into the inputs
  hi @Greg-Gardner Audio Cleaning Lab series is Sound Forge in name only...the Sound Forge developers do not make this...Sony never developed Audio Cleaning Lab either. i can't reproduce this issue at all, but it would be helpful for everyone if you