• Video Easy

  3 answers, most recent on 6/10/2011

  RE: No sound when videos imported
  Vob's what you need. Try playing the VOB file in Windows Media Player, to see if the sound is ok/accessible in the transferred file.  You would need a firewire lead to transfer from your camera directly into the program, but if the VOB file plays
• Off topic

  3 answers, most recent on 6/1/2011

  RE: Why am i getting a black/white image and shaking up/down?
  Hi, blubb444 i want to thank you for providing me with this information. I will most definatly get the firewire IEEE 1394 pci card and wire also. Again thanks. 
• Off topic

  3 answers, most recent on 6/1/2011

  RE: Why am i getting a black/white image and shaking up/down?
  Hi, I've checked the camera model you have, and it seems to record on Mini-DV cassettes. And according to http://www.usa.canon.com/cusa/support/consumer/camcorders/minidv_camcorders/zr10 it also comes with a DV terminal which lets you transmit the
• Video Easy

  One answer, on 5/30/2011

  RE: IConnection
  Not all cameras can nor will be recognisable to a program from any manufacturer. You have connected via firewire with no joy? If you are using Win7 sometimes you need to regress, i.e. use an older driver for the firewire card IEEE Bus
• Video Easy

  One answer, on 5/30/2011

  IConnection
  I am unable to connect my Panasonic NV-ds15 camcorder to this software either through Firewire or AV. can you help?
• Music Maker

  3 answers, most recent on 5/27/2011

  RE: How to to track my DJ set with MM 16.
  I'v asked this before but nobody has answered me. I dj too.   I havn't tried this yet because my turntables were fixed and still wrapped up. I havn't set them up and decided to learn production instead. But I will try to give you a few
• Movie Studio

  2 answers, most recent on 4/29/2011

  RE: How can I get Sony DCR-HC40E to work with Winodows 7?
  Rankamateur,   How are you connecting the camera to your computer? A web search suggests 'Firewire' must be used for video, and that the USB connection is for downloading still images. Have you tried capture using Windows Movie
• Movie Studio

  2 answers, most recent on 4/29/2011

  RE: How can I get Sony DCR-HC40E to work with Winodows 7?
  The problem is Firewire and Win7, and it has been answered many times on this forum. Use the "Search"  and write  "win7 dv" as keyword, I got 86 results.
• Movie Studio

  2 answers, most recent on 4/12/2011

  RE: Can not connect to selected device
  If you have Win7, it is no surprise to have problems with Firewire. It is adviced to install an older driver for this. Make a search on this forum, I got more than 50 results when asking "win7 firewire"   Regards A
• Movie Studio

  2 answers, most recent on 4/12/2011

  RE: Can not connect to selected device
  Restart the computer without camera connected to firewire port. Connect the camera to the cable and the fire wire input (may be you have 1 input and 1 output ) Windows must detect the new hardware check bottom right hand corner (also sound)
• Movie Studio

  2 answers, most recent on 4/12/2011

  Can not connect to selected device
  I am trying to Import Video files from my DV (Sony DCR-HC21 Digital Handycam Video Camera) and the Pro 17 Magix software is saying it "Could Not Connect to Selected Device".  I've setup the 1394 Dynex Firewire ExpressCard, the laptop recognized
• Movie Studio

  3 answers, most recent on 5/11/2023

  RE: [Closed] Problems with audio after importing
  Hi, How do you capture video from your camera, do you use a firewire card and cable. After capturing in your software select the track on the timeline use Edit Ungroup to separate track sound from video track. Select the track sound and File
• Movie Studio

  3 answers, most recent on 4/5/2011

  RE: no sound
  gosh22,   john-auvil is asking how did you get your video from your camera to your computer. Older models require an add-on card in the computer to convert the analog (continuously varying) signal on tape to digital information the computer
• Music Maker

  2 answers, most recent on 3/29/2011

  Why can´t I listen to the audio while recording it?
  I´m working with the Magix Music Maker 17 Premium, a extern soundcard Presonus Firebox (whose configuration seems to be correct because I am able to listen midi and even the finished audiorecordings like voice or acoustic guitar ). The card works
• Movie Studio

  3 answers, most recent on 3/26/2011

  RE: how can i record the video from my camcorder ?
  Hi, DV camcoder use a firewire cable to link to a computer, the computer must have a firewire port on the board or you can buy a firewire card to install in a PCI slot. Old laptop before Windows 7 offer a firewire input using a special
• Movie Studio

  3 answers, most recent on 3/26/2011

  RE: how can i record the video from my camcorder ?
  For a Mini-DV camera you need a Firewire cable. There are 2 types, 4pin/4pin for a Laptop, and 4pin/6pin for a stationary PC (normally). Hope you have Firewire contact on your PC. Then you can transfer (capture) the file to the PC with MEP.
• Video Easy

  2 answers, most recent on 3/25/2011

  RE: What cable is needed to connect HDV Camera to pc?
  Hi, Normally HD camera are USB mini connector cable that means one end is a regular 12mm USB and the camera end is a mini USB 4mm. Previous camera DV use firewire connector but new technology replace this with USB. Regards, YR 
• Video Easy

  2 answers, most recent on 3/25/2011

  RE: What cable is needed to connect HDV Camera to pc?
  For tape-cameras we must use Firewire-cable. Usually a 4-pin end in camera, and 4-pin to a Laptop. Stationary PC's have a 6-pin connection.  And i hope your PC has FW-contact.
• Movie Studio

  4 answers, most recent on 3/27/2011

  RE: converted analogue video
  donhargreaves,   First, the Sony site and others describe your camera as 'Full-featured compact Digital 8 Handycam', which I'd already suspected if you are downloading via firewire.   Scene recognition works for me in both MEP14+
• Movie Studio

  4 answers, most recent on 3/27/2011

  converted analogue video
  After downloading an analogue tape via a sony DCR TRV 460E PAL camcorder and firewire to my Vista Home Premium computer, I am presented with one movie without scenes. After running automatic scene recognition seperate scenes are still not
• Video Easy

  4 answers, most recent on 2/22/2011

  RE: I have connected my videocamera to USB-stick but i nothing comes up in MAGIX VideoSaver
  Hi there,   if you are connecting a digital camera, then you do not need the analog to digital converter between the two. That's only for analog to digital, such as from a VHS recorder. So, if you have a firewire link, use that to
• Music Maker

  8 answers, most recent on 2/12/2011

  RE: Connecting Guitar To Magix MM16
  Also, if you have a laptop please understand the following. The MAGIX software you are using requires a full duplex 16 bit sound card. A lot of laptops use a 16 bit half duplex sound chip (8 bit integrated chip). This means you are already
• Movie Studio

  6 answers, most recent on 2/3/2011

  RE: camera connection
  Exactly! With mini-DV you had to make a realtime 'recording' the playback from the tape even though it was in digital format to begin with. No dropped frames from slow analogue to digital conversion off old tapes! The newer cameras store the
• Movie Studio

  6 answers, most recent on 2/3/2011

  RE: camera connection
  Thanks everyone. So I can forget about controlling the camera using Edit Pro which I used to be able to do on my previous camera a Sony mini-dv which had a firewire connection. But now with thumbnails i can just dump to the hard drive and pick