• SOUND FORGE

  40 answers, most recent on 5/29/2020

  RE: Sound Forge " requires elevated privileges ". Fixed in the MAGIX version?
  The SF "Elevated Privileges" issue usually happens soon after a Win update. I've had to tweak the registry for Sound Forge Pro 10 more times than I care to remember. Pro 12 and 13 are not subject to this annoyance in my experience. I do not have
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  Hi Peter. I am one bios update behind the current one but will leave that alone for now until I'm completely sure about my bios settings. This is something I do not do on a regular basis and not going to play with until I am sure. Both monitors are
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @johnebaker @Scenestealer @mmcswnavy24 @terrypin General Update. What I did in the last post without altering anything else seems to have worked. Things have kicked up a gear. I'm getting a (Hardware Encoding) message on the top of the export box
• Movie Studio

  21 answers, most recent on 10/5/2019

  RE: Need help with new computer specs
  Just as I thought I was beginning to understand things, then, those last couple posts have me confused. So, is more cores the way to go, or fewer cores with higher speeds. Regardless, I think I have a found a pretty good used deal, What do you think
• SOUND FORGE

  5 answers, most recent on 9/8/2019

  RE: slow save to MP3 file
  The LAME encoder is not available in SF. It can be added, but I recall it was difficult and required registry tweak and such, so I have never tred it. I usually render a PCM master beforehand anyway, so using a third-party UI is no big deal.
• Web Designer

  2 answers, most recent on 8/28/2019

  RE: Deleted web file
  Thanks for the reply John, I have found a saved copy that is basically the same as my published site just needs a bit of tweaking ! Catastrophe averted ! Thank you for your advice. Russ
• Music Maker

  One answer, on 8/12/2019

  Beats and licenses
  Ok so I used royalty free songs from music maker jam on my iPad and I put a few of my own tweaks to it. They say that you’re suppose to buy a license in order to sell the music you made for commercial uses, in which I want to, I don’t want it just
• Music Maker

  One answer, on 8/9/2019

  RE: Magix
  @dustin-crank Hi and welcome to the forum. Please read this topic and the Community rules (link at the bottom of forum page) and note this is a user to user forum provided by Magix, it is not customer support. Should you have an issue with Music
• Other products

  One answer, on 6/11/2019

  RE: Magix PC Check & Tuning 2019 Has Disabled Needed PC Functions
  Could be it has disabled your Windows Quick Launch Toolbar. This might help: https://tweaks.com/windows/39425/restore-quick-launch-toolbar/ I just got PC Check 2020 day before yesterday and yesterday I removed it completely for just such reasons.
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  @Scenestealer Hi Peter, I wrote up the following last night, took too long, didn't do a copy to clipboard, unable to post because I got logged out. We need more time! Further to your comments about seeing the effects produced by adding a LUT and
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  Point 20) and 21) - I would like to see this info too but as an indicator at the edge of the clip showing that it had been trimmed - perhaps just a coloured bar and a number of secs and frames that remained beyond the ends. I think Pinnacle Liquid
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  @johnebaker Thanks John but how would changing the order help in your case? If you mean that applying section makes it too hard to tweak the other effects wouldn't unticking the section effect in the KF timeline disable it while adjusting the other
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  @browj2 Some good suggestions there John. Point 20) and 21) - I would like to see this info too but as an indicator at the edge of the clip showing that it had been trimmed - perhaps just a coloured bar and a number of secs and frames that remained
• Video Pro X

  21 answers, most recent on 7/8/2020

  Wishlist for future VPX versions (beyond VPX10)
  This was previously raised by Magix in this thread. A few of the requests were implemented, significantly J- and L-cuts. I thought that I would refresh this and add to the list, so it's a mixture of (modified) previous requests and some new
• Movie Studio

  49 answers, most recent on 5/28/2019

  RE: How to create distance in audio?
  Hello Felix I'm sure you have plenty of information by now. People here are very helpful indeed. Just thought I'd add some simplistic ideas that have been covered more or less ... I've been doing audio since the 60's using analog equipment then
• Movie Studio

  9 answers, most recent on 5/16/2019

  RE: Cannot use my MP4 codec
  @CarpentersMate No, a solution has never been forthcoming. Support suggested "... a complete and clean reinstallation since there is a good chance that this solves the problem and there are no other customers with the exact same problem." Given the
• Movie Studio

  11 answers, most recent on 5/14/2019

  RE: Video Preview Playback Issue
  Ok, thanks much, guys. I know you're all correct and I'm doing all I can to remedy this. Yesterday's performance was a little better after a few tweaks of my system settings but still frequent stalls and skips in playback. I'm looking at new
• Movie Studio

  11 answers, most recent on 5/14/2019

  RE: Video Preview Playback Issue
  Thanks CubeAce, I understand what you're saying. I've been looking to step up some but top of the line is gonna be outta my reach. I do think this machine will suffice for video editing, I've used lots less over the years with no problems. I'm
• ACID

  One answer, on 5/11/2019

  RE: ACID Next
  I don't see it like that at all.... So far Magix have delivered an increasingly stable (on my computers anyway) 64 bit version of ACID Pro that is VERY snappy to work with and has added a lot of extra value with the included plugins and synths...
• ACID

  One answer, on 5/11/2019

  ACID Next
  Okay so I've been part of Sonic Foundry since the beginning of ACID. Then Sony took over and now of course Magix. The thing that tweaks me is that they have created these different versions of ACID. First they come in and want you to pay them and
• Movie Studio

  5 answers, most recent on 5/10/2019

  RE: Encoder delays video/advances audio out of sync MEP17
  For stretching audio, I've learned that: You can't simply grab the end of the audio clip in the Arranger and drag it to the new length. Time stretch is an Audio Effect based on Tempo, not duration, which means having to convert the desired positive
• Samplitude

  11 answers, most recent on 4/25/2019

  RE: Interleaved Recording - Pro X4
  Grouping helps a ton, but having a single virtual stereo track that represents all the actual tracks for editing would just be heaven. I was hoping that's what the Interleaved Recording feature would be, and it appears that it is - but maybe only
• Samplitude

  11 answers, most recent on 4/25/2019

  RE: Interleaved Recording - Pro X4
  Well, I've thought of mixing first - levels, compression, EQ, etc. - and then bouncing the mixes into single stereo takes for editing. But I usually have a "Can you bring the soloist up just a tad?" kind of request, and it's obviously too late to
• Movie Studio

  8 answers, most recent on 4/19/2019

  RE: Chroma Key effect does not render in final exported file (?)
  Hi John, I tried the method you gave a link to in the above message, using the MASK GENERATOR and then STAMP-ALFA. At first, I used the mask with my foreground video and moved the background video to track 4. But this gave me the cookie-cutter look