• Music Maker

  7 answers, most recent on 9/28/2025

  MM2026 34.0.0.6 VST instruments causing severe audio problems
  I have an issue where all forms of sound from VST midi instruments stop functioning normally. They become distorted, slow, glitchy and cut out. This happens in all methods of playing the VST sounds: Keyboard play while the arranger is not playing,
• Video Pro X

  111 answers, most recent on 1/29/2025

  RE: Feedback about VIDEO PRO X15
  Unusually Poor Timeline Performance on New Hardware/ W11 !!! Something WRONG with Video Pro X15. I have Vegas Pro 20 and Resolve running beautifully with ChromaKey Pro or Boris Primatte Studio plus Skin Smoothing plugs running on the timeline of
• Movie Studio

  8 answers, most recent on 9/18/2023

  RE: MEP and NUC PC
  @martin-brennan Assuming I have got the correct specs for your machine and the SDD presents no problems then the only problem could be one of keeping an eye on the temperatures. It is difficult to say with any certainty but if the CPU does have that
• ACID

  7 answers, most recent on 9/16/2024

  RE: Acid Pro 11
  I have been using Acid Pro and purchasing updates since it was owned by Sonic Foundry. Pro 11 is likely my last unless the many crashing issues are resolved very soon. Will certainly no longer recommend it to those I have been helping get started
• Movie Studio

  13 answers, most recent on 8/17/2023

  RE: Program Error
  @PETER-CLARKE Hi Peter. The one thing I have noticed over the few years I've used MEP / MMS / VPX, is as well as the 'upgraded abilities' that some other abilities go quietly missing that were never really mentioned as being able to do. One such
• SOUND FORGE

  11 answers, most recent on 4/20/2023

  RE: Why do you make it so difficult to get support?
  @Michael-Babbitt I shouldn't have to look up the error code, my friend. That's counterintuitive. Was there not an error code shown that you didn't indicate in your post?   Would you prefer to raise a ticket and wait for 2 or 3 days for a cut and
• Movie Studio

  7 answers, most recent on 2/11/2024

  RE: Is there a social media subscribe template/lower thirds text?
  @Kobie-Mercury-Clarke Hi. @johnebaker is correct. It is possible to build your own animated texts and add logos. Logos can present a problem if you can't find a suitable one from the net and are not artistically inclined to produce your own. If you
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  @Reyfox In video editing, which do you think will garner more "street cred" when asked what software you use? Where does that now leave VPX? Heck, even Vegas Pro offers more compelling reasons for someone to upgrade to it for pennies more than VPX,
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @browj2 @Reyfox @Former user @johnebaker Hi John.(CB) I don't think Boris is really aiming aiming it's products at individuals but companies. Their suite of plugins are only available on a monthly or yearly subscription starting at $175 a month, or
• Movie Studio

  4 answers, most recent on 12/4/2022

  RE: HitFilm, NewBlue Filters useful for MAGIX Movie Studio Suite 2023?
  @AAProds @Promidi @SomeMan Hi. I have access to a few older plugins but some may come up within the current video editors (mine are MEP 2022 and VPX 14) as not compatible any more such as the New Blue Refocus did for me. NewBlue Filters 5 Ultimate
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  Hi guys, @Gid Yep, I sometimes call MMS 'basic', maybe that's a poor word choice but although sometimes that's taken defensively Yes, poor choice because there actually was a "basic" version of MEP and MMS. It has disappeared. When, I'm not sure,
• Video Pro X

  65 answers, most recent on 4/7/2024

  RE: VPX prices until April 9, 2024
  @Betovalle @Reyfox @browj2 @Former user Hi Roberto. Maybe the pricing difference is just down to trying to persuade people to buy the program. Vegas came with a creditable history which I would term legendary simply because people who have never
• Movie Studio

  19 answers, most recent on 2/16/2023

  RE: Window Arrangement keeps changing
  @RichD Hi. Although I think as far as you have stated your monitor screen size and refresh rate as well as Windows version I don't think any of us know the rest of your system spec. If you could let us know any graphics card information, CPU
• Video Pro X

  65 answers, most recent on 4/7/2024

  RE: VPX prices until April 9, 2024
  @browj2 I never underestimate the skills of any editor. Nor assume that the tools that are present in any editor are beyond their skill level. While these may be enough for some, it's not enough for everyone. That is why more comprehensive tools
• Movie Studio

  18 answers, most recent on 3/14/2024

  RE: versions 2023 and 2024 Movie Studio Platinum on the same machine
  @Betovalle Hi Roberto. The minimum specs page for VPX15 states a minimum of 16GB ram as well as an Intel Graphics HD 620 or higher internal GPU and an additional nvidia or AMD graphics card, preferably an nvidia card with at least 4GB of
• Video Pro X

  13 answers, most recent on 1/23/2024

  RE: Software Corruption?
  @Scott-Rindenow Hi Scott and welcome to the user to user forums. Is your CPU an i7-10510U? If so the inboard top spec Iris XE GPU is about on par with either a GT 1030, or GTX 650. Results will vary dramatically depending on power limit, and memory
• Video Pro X

  175 answers, most recent on 5/27/2026

  RE: Video Pro X16 - New Features and Bug Repairs
  @browj2 wrote: @Gid Your image of the Vegas way is correct for both VPX and Vegas. The difference is that the image that is on the bottom, the background, is on track 1 in VPX, whereas in Vegas it is on track 4. Sorry, I respectfully disagree. It
• Music Maker

  19 answers, most recent on 12/19/2022

  RE: Successfuly not activated
  @Milan-Bartek Please be aware these are user to user forums and confidential data, like your serial key, must never be posted here. There are NO Magix staff present in the forums. At what point were you asked for a nickname? I can't ever remember
• Movie Studio

  84 answers, most recent on 5/20/2023

  RE: Benchmark for Movie Studio 2023
  @MarcinKrk Hi Marc. That would be me with the project files. I will make the original files we used in 2019 available again but I think this time around I will make terms and conditions for the benchmarks more stringent with a verification section.
• Movie Studio

  3 answers, most recent on 9/11/2023

  RE: Title Templates aren't getting added to the timeline
  @nando_ @Former user @emmrecs Hi, I did my tests with VPX15 which should have the same problems as MMS2024 Platinum/Suite. The program wants to place a title on track 3 by default. If there is something in the way on track 3, the title will be
• Movie Studio

  4 answers, most recent on 12/29/2023

  RE: Slow Export and Lack of features
  @Darren-Shotton Hi. Your phone works better because it has a newer processor type than your computer and is designed for the operating system it works on. Once a phone gets to a certain age, normally more than four to six years old it can no longer
• Movie Studio

  6 answers, most recent on 1/16/2023

  RE: Pixelization Effect(ish)/Cookie Cutter Question
  @JonM Hi. I used a similar method to the one @browj2 describes in the video below. You get a reasonable idea from 31 minutes onward in the video for a minute or two in the video. Auto tracking in the the latest releases of Movie Studio or VPX is far
• Movie Studio

  16 answers, most recent on 12/21/2022

  RE: Movie Studio freezes when editing multiple 3D videos
  As to the comment about the auto alignment not being necessary, the camera I was using has a vertical shift between left and right images. It is a constant shift, but after I update the firmware I can fix the problem internally in the camera. The
• Photostory

  One answer, on 12/19/2022

  RE: there is no serial number on the cd or on the invoice. I need this.
  @WILLIAM-CELESTINE Welcome to the Magix user to user forums. There are no Magix staff present and confidential details like Invoice and Customer numbers should never be posted to a public forum like this one. Hence, your post has been