• SOUND FORGE

  2 answers, most recent on 8/5/2022

  RE: Limiter
  I am not very familiar with the limiters included with Sound Forge AS. Peak normalize may work, but it sets the global highest peak (as desired), but low level sounds would still be low in relation to the highest peak I recall an Express Dynamics
• Other products

  One answer, on 8/1/2022

  Pad sound libraries for Independence 32-bit?
  Dear Anyone. Before you read the following, bear in mind I royally suck at websites!Just found Independence 32-bit - older DAW, sorree!! - it SAID it came with a 2gig library but I only got a 26.1 megabyte download so I'm not sure what I did wrong
• Movie Studio

  26 answers, most recent on 8/20/2022

  RE: Sound Mixing problems
  @johnebaker @browj2 Hi John. (CB) That doesn't happen for me. Nothing on the track on either side of an object, Curve does nothing. If there is an adjacent audio object, then it will affect that object, but not the track curve. Can you demonstrate
• Movie Studio

  11 answers, most recent on 6/15/2022

  RE: Installation of MEP2016 Plus On New Computer
  @CarpentersMate Hi Mike Both PC's , MAC's boot up from a BIOS. It is an essential component of the motherboard that holds settings for the motherboard hardware, some customisable user settings and where to look for the OS boot up. The option for
• SOUND FORGE

  10 answers, most recent on 6/7/2022

  RE: Installed Sound Forge Audio Studio 16.0 (Build 39) 64-bit
  The MP3 file sounds ok in Sound Forge on my PC., though there is excessive brick-wall limiting in a few places, but that would not cause the sound you describe. If all file types have the same abnormal sounds, I recommend uninstall / reinstall Sound
• SOUND FORGE

  2 answers, most recent on 2/27/2022

  RE: Volume Maximizer
  Welcome to the Magix Sound Forge users community I like Sound Forge Pro's legacy two-stage Wave Hammer @tony-souza for some music projects due it's vintage 1176 FET sound. Wave Hammer has an initial compressor/limiter stage and a secondary volume
• SOUND FORGE

  10 answers, most recent on 2/19/2022

  RE: How do I turn the limiter off when recording?
  Thank you for the info--I definitely didn't initiate the process, but it happened after I upgraded to 11, so it seems like something happened in that process? Yes, the audio sounds distorted if it gets to the "brick wall". I have a tech friend that
• SOUND FORGE

  10 answers, most recent on 2/19/2022

  RE: How do I turn the limiter off when recording?
  It certainly appears there is some kind of limiting happening. I would look at your soundcard/interface settings. Is the audio distorted some? Many folks make the mistake of feeding a line level signal (-10 or +4 dBm) into a microphone level input
• SOUND FORGE

  4 answers, most recent on 2/9/2022

  RE: A native limiter on SFP?
  Wave Hammer (legacy version) has a compressor/limiter stage and a secondary volume maximizer stage. A volume maximizer is an infinity:1 peak limiter but has an auto volume make up circuit... as you are probably aware, when the threshold on a typical
• SOUND FORGE

  One answer, on 1/28/2022

  RE: amplify a very weak sound with sound forge pro 15
  Welcome to the Magix Sound Forge users community @flo-l. Try "Process> Normalize" . The Peak Normalize option will preserve the dynamics and can raise (or lower) the entire (or selected) waveform amplitude. The RMS normalize mode is quirky and
• SOUND FORGE

  4 answers, most recent on 1/27/2022

  RE: Expand recording levels
  You can use normalization to boost the overall peak amplitude (volume) to 0.0dBFS or below in Sound Forge' Process menu, A peak normalizer will not compress or change the dynamic range, it will just raise (or lower) the file's entire amplitude, An
• SOUND FORGE

  One answer, on 11/5/2021

  RE: Sound Forge Pro 14.0 (140) Problems
  Firstly, do you have the latest SFP-14 build installed. 1. There is a 'multi-instance' default change that was initiated with SFP-14 build 111. See this post to change it back to the legacy 'single-instance' behavior. 2. I cannot duplicate that
• Music Maker

  5 answers, most recent on 1/7/2021

  RE: unable to launch Music Editor add on
  @Dj_Sanjay, @MauX-65 . . . .you have to search the internet for the missing .dlls . . . Getting dlls from 3rd party's is not a good idea - you never know what you are getting and could end up bricking your PC or get ransomware installed. Uninstall
• Video Pro X

  25 answers, most recent on 10/13/2020

  RE: How can I convert movie made in 2006 with BUP, VOB, IFO and MVD files?
  @CubeAce Hi Ray . . . . I can't get  good balance is 47 seconds in on the video below . . . . I think there is another issue at that point, even at FullHD the video looks slightly blurred in the brick wall and the house on the left does it look like
• Video Pro X

  25 answers, most recent on 10/13/2020

  RE: How can I convert movie made in 2006 with BUP, VOB, IFO and MVD files?
  @Scenestealer @johnebaker @emmrecs @lauriemessage Hi Peter. I think that subject is worthy of a tutorial of its own as it is quite complex for people to get their heads around. I was still quite young (about 14) when I remember using super 8
• Movie Studio

  37 answers, most recent on 9/5/2022

  RE: Video quality very bad after export /MAGIX MOVIE EDIT PRO PREMIUM
  @CubeAce Referring to my zooming of the preview window when observing the sharpening effect - of course I appreciate that what matters is the overall effect when viewed full screen, but it is useful to observe close up how much it is unnaturally
• Movie Studio

  19 answers, most recent on 6/24/2020

  RE: Looking to buy a decent Video Cam for £200 - £300 -SUGGESTIONS
  @browj2 Hi John. Judging from looking at some of his other videos and the fact he lives in Las Vegas I think it's possible but on the cheaper units I wouldn't have thought he would need it until he got to the higher end of the price range. A lot of
• ACID

  6 answers, most recent on 9/15/2020

  RE: Working with the Plugin Manager
  I have always been very clear that the Native Instruments software and ACID software are separate. i am in the middle of sending communications to them to figure out if their program will even work on my computer. The RIG sound library which I just
• SOUND FORGE

  One answer, on 6/1/2020

  RE: Problem with Effects - Dinamics - Graphic
  The graphic dynamics tool cannot function as a (so-called) 'brick-wall limiter," nor does it detect ISPs (Inter Sample Peaks.. if that's a problem).Try Sound Forge Pro's two-stage 'Wave Hammer', LoudMax or the Kjaerhus Audio Classic Master Limiter,
• SOUND FORGE

  12 answers, most recent on 5/18/2020

  RE: sudden buzz flat line appears when recording in Sounds Forge 10
  Yes, all hardware, firmware and software drivers are up to date. I am using the latest Focusrite drivers they have. The only thing I can think of right now is going through "a process of elimination", try another laptop, try another Focusrite
• SOUND FORGE

  12 answers, most recent on 5/18/2020

  RE: sudden buzz flat line appears when recording in Sounds Forge 10
  What about Thunderbolt3 docking bricks? Is there a known problem with recording through a Thunderbolt3 docking brick, where the Focusrite audio interface USB cable is plugged into the Thunderbolt3 docking brick, and the docking brick is plugged into
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @Scenestealer This is in VPX, yes? At least this is something to do during lock-down if not a key worker😆. Of course all of this testing gets thrown out with the bath water once various effects and more complex fades are applied but good to see base
• Other products

  3 answers, most recent on 3/3/2020

  [Closed] Movie Studio Platinum 13
  Hello, My last PC recently got bricked, resulting in the loss of my Movie Studio Platinum 13 program. I'm up and running again on Windows 10. After some research, I found that Magix acquired the "Movie Studio" product at some point. I am trying to
• Xara Designer Pro

  6 answers, most recent on 3/11/2021

  RE: SmartShape error prohibits opening website files
  @onlye Hi . . . . Plus submitting a ticket to Magix support is like beating your head against a brick wall. The process seems to be designed to have users finally give up without reporting issues.. . . . In my experience Magix Support have been very