• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  @rickduley Rick, Should a squeaky-clean version of VPX16 burn DVD-DL discs okay? It "should", but "will" it? 😂 One thing before I risk turning another DVD-DL into a brick: Burn to the "Image Recorder"/ISO first. If that bit fails, you know it's the
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  I have just spent six hours with MS CoPilot uninstalling VPX16, cleaning any trace of VPX16 from my PC including Folders, files, Registry Keys and other things above my pay grade, reinstalling VPX16 without ads popups and other annoying traits I
• SOUND FORGE

  29 answers, most recent on 9/16/2025

  RE: SF 11 refuses to start, even full re install
  @daniel-DIAZ2990 It's likely they will say that this is a legacy software and they no longer support it. The current version is 18, not 11. If both Sound Forge Pro 11 and Samplitude Pro X3 suddenly had problems starting and now Sound Forge during
• SOUND FORGE

  4 answers, most recent on 5/14/2025

  RE: RMS Level
  I am assuming normalization, compression, ect. comes after recording. Yes. and you really have no choice when recording directly to Sound Forge ..unless you record through analog outboard gear or your A/D interface has processing . Otherwise it
• SOUND FORGE

  29 answers, most recent on 9/16/2025

  RE: SF 11 refuses to start, even full re install
  @daniel-DIAZ2990 Maybe try the following: Install a virtual machine software, for example VirtualBox or VMware. Download an ISO file from Microsoft and install Windows 10 or Windows 7 in the virtual
• Music Maker

  17 answers, most recent on 5/29/2024

  [Solved] Music Maker just locks up & becomes un-responsive
  Music Maker just locks up & becomes un-responsive. I paid a lot of money over the years for MAGIX products and it used to work seamlessly. Now it just locks up and and I can't click anywhere or do anything. Sometimes it may become responsive
• Movie Studio

  6 answers, most recent on 12/4/2024

  RE: Custom Buttons on BluRay Menus Throw Errors on Menu Encode
  Sorry to say that suggesting I get out of print software and then not really addressing my post is not very helpful. I am in the midst of trying to hack my custom buttons into a copy of a default template since the very act of adding a button makes
• SOUND FORGE

  29 answers, most recent on 9/16/2025

  RE: SF 11 refuses to start, even full re install
  @daniel-DIAZ2990 It's likely they will say that this is a legacy software and they no longer support it. The current version is 18, not 11. If both Sound Forge Pro 11 and Samplitude Pro X3 suddenly had problems starting and now Sound Forge during
• Movie Studio

  11 answers, most recent on 2/16/2024

  RE: Edge Sharpening
  @browj2 Hi John This is what Al and I are seeing - look closely at the edges/joints of the bricks and the clock, when the All-Edges slider is at 100 there is no sharpening, as you can see there is no change when I turn off the effect at the
• SOUND FORGE

  10 answers, most recent on 11/24/2023

  RE: Sound Forge 17 Pro - Fx Plugin render adds 170ms to end of track
  @FB33 Hi In addition to @SP.'s comment, is the low pass filter set with a 'brick wall', ie high rate of cut-off slope, if so this can cause a resonance which may extend the audio by a very small amount. In this case, try changing the cut-off so that
• Movie Studio

  90 answers, most recent on 1/13/2025

  RE: Slideshow-Reducing photo length merges Audio track
  So, Gid, in your VP example, put the three images that are on track 4 so that they abut one after the other. Then, increase the duration of those three images by more than double the current duration, say from 5s to 15s. Please show the result The
• SOUND FORGE

  38 answers, most recent on 10/8/2024

  RE: Sound Forge Minimal Video tools; what do I need next?
  Hello:   I DID purchase Vegas Pro Suite v.21 but the learning curve looks like a brick wall at the bottom...totally different world. I have accomplished very little with it so far. I gave up trying to understand splitting and trimming with it for
• Movie Studio

  57 answers, most recent on 8/31/2023

  RE: New Release MMS 2024....
  @Former user ahh... I now see what you are referring to. Is it by design? I would hope not! I guess this is a proDAD question. Upon rethinking, if you play the entrance clip without the transition, is there lightning happening? That might be why
• SOUND FORGE

  10 answers, most recent on 11/24/2023

  RE: Sound Forge 17 Pro - Fx Plugin render adds 170ms to end of track
  @FB33 Hi In addition to @SP.'s comment, is the low pass filter set with a 'brick wall', ie high rate of cut-off slope, if so this can cause a resonance which may extend the audio by a very small amount. In this case, try changing the cut-off so
• SOUND FORGE

  12 answers, most recent on 5/18/2020

  RE: [Solved] sudden buzz flat line appears when recording in Sounds Forge 10
  I think I found the problem, so I will post it here to help others that may encounter this. The Focusrite Scarlett series audio interfaces use the Microsoft Visual Studio C++ 2017 redistributable package for their driver on Windows 10 machines. When
• SOUND FORGE

  12 answers, most recent on 5/18/2020

  [Solved] sudden buzz flat line appears when recording in Sounds Forge 10
  I am using Sound Forge Audio Studio 10, with a Dell XPS 15 7590 laptop running Windows 10 Pro, 1TB nVmE hard drive with 32 GB of memory. My audio interface is a Focusrite Scarlett 2i4 which is connected to the laptop via USB cable. I am using 1/4"
• SOUND FORGE

  2 answers, most recent on 12/30/2019

  RE: [Solved] How to limit?
  Below is an example of a 'brick-wall' limiter with the Graphic Dynamics processor, Additional points can be added for over-easy compression prior to the limit threshold, An expander curve can be added as well which can be used to attenuate BG noise
• Off topic

  11 answers, most recent on 5/9/2023

  RE: Survery cupon not working.
  @Hannes-DuPlessis Hi The definition of scammed is 'to trick someone into giving you money, usually in an illegal way'. Magix have not scammed you. You have not lost anything, you have gained a coupon of a given value to be redeemed against a
• SOUND FORGE

  4 answers, most recent on 4/11/2023

  RE: "Append to current data window" failing with 32-bit files
  Hi @Douglas-Lacey, I do not have any FP32 files off-hand, if you can upload some on a cloud drive, we can check them out. However, there is really no reason to use floating point 32 bit after the initial location recording anyway. Sound Forge
• Video Pro X

  One answer, on 8/17/2023

  [Closed] Vegas Pro 20.0 (Build 411) is refusing to even open.
  I'm trying to get a video out.. like right now.. and it's completely impossible because the program will not even open up. I've uninstalled & reinstalled the entire program. Twice. Googled the exception number and followed the steps to give the
• Movie Studio

  70 answers, most recent on 2/7/2023

  RE: How to access NewBlue FX in MS suite?
  Hello John. Corel's offering feels different from Magix's for sure. But once I stuck with it, it's not painful, and so far in many cases much simpler than Magix. As with all these programmes, you end up against some silly brick wall now and
• Movie Studio

  70 answers, most recent on 2/7/2023

  RE: How to access NewBlue FX in MS suite?
  Hello John. Corel's offering feels different from Magix's for sure. But once I stuck with it, it's not painful, and so far in many cases much simpler than Magix. As with all these programmes, you end up against some silly brick wall now and then. It
• ACID

  11 answers, most recent on 4/21/2023

  RE: 0db master level? Boosting?
  @dLife There is a big difference between volume level and perceived loudness of a track. Usually you need to use a compressor and limiter to reduce fluctuations between the loud and quiet parts of your song and to raise the overall volume without
• ACID

  11 answers, most recent on 4/21/2023

  RE: 0db master level? Boosting?
  Hi @SP. thanks for that. Are you saying that Mastering Suite is bundled with Music Studio? I couldn't find it but when I search online it is kind of directing me to MUSIC MAKER 2023 PLUS. I found a free version that I installed but it doesn't help