• Movie Studio

  8 answers, most recent on 11/24/2023

  RE: Two minutes of music is "silent" or gone or...
  @browj2 Hi John. There are 2 audio curves available - Track Volume Curve and Object Volume Curve. They are separate. Ray, the draw Curve tool is a tool, not a curve. It applies only to Object Curves, not to Track level curves. The Curve tool can be
• Movie Studio

  8 answers, most recent on 7/12/2023

  Fonts Appearing Incorrectly
  I have a preferred Google font that I use called Lexend. I'm trying to use it with Movie Studio 2023 Platinum, and I've run into a couple issues. Firstly, I have the whole font family downloaded, consisting of Thin, ExtraLight, Light, Regular,
• Movie Studio

  21 answers, most recent on 8/14/2023

  RE: MS2023: area outside of the viewable screen; change color
  @nhong-xiong Hi, The short answer is no, or at least I have never seen it. By viewable TV screen area, do you mean the settings under the top menu, Effects, Movie Effects Settings, TV cropping? If so, what are your settings? EDIT:Wrong answer
• Movie Studio

  8 answers, most recent on 11/24/2023

  RE: Two minutes of music is "silent" or gone or...
  @CubeAce Hi Ray, I see that you still have not watched my tutorials on Everything Audio in MEP/VPX. You have somewhat mixed up track and object curves and their functions and tools and how to use them. @FF22 - You should watch my two tutorials on
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @browj2, BorisFX is not supported by VPX according to their WEBPAGE. I've worked with NBFX Titler Pro as a standalone and exported the file just fine. No, it doesn't work faster, but it also doesn't bog down the NLE either when it has to play back
• Movie Studio

  One answer, on 9/19/2022

  RE: Black spaces
  @Gilbertc In the very first thread you ever created in the forums, here, you were asked to state the FULL specifications of your computer and the exact version and build of Magix software which you have. That request still stands! There could be
• Movie Studio

  296 answers, most recent on 3/29/2025

  RE: [Closed] Feedback on Movie Studio 2023
  @MAGIX_Redaktion Hi, It would be nice if Magix would get around to fixing the bugs that I and others have raised - over and over. They were for VPX but also apply to MEP/MS. If you don't know what these are, check my account and the tickets that
• Movie Studio

  28 answers, most recent on 8/10/2022

  Suddenly Movie S is not decoding Lagarith or Huffy encoding correctly
  Suddenly after exiting and coming back to my project the input files are not being decoded properly. As I playback the input, MS displays random frames from various parts of the file. Some sections play properly and then some have random frames
• Movie Studio

  20 answers, most recent on 7/24/2022

  RE: combine clips without interruption
  Thank you John EB and Jeff. I use an Acer Predator Helios 300 laptop running Windows 10 Home, Version 21H2 (OS Build 19044.1826) with Intel Core i7 9th Gen and Invidia GE Force GTX. As far as I can determine, the two clips are .MPG and the frame
• Movie Studio

  34 answers, most recent on 4/24/2023

  RE: stability creates confidence in the product
  @browj2 @Betovalle This is all I have on MEP. Version 2022 NEW FEATURES IN MOVIE EDIT PRO 2022! INFUSION Engine 3 MAGIX Travel Maps New controls Ultra-fast export with the INFUSION Engine 3 – 5x faster than real time Movie Edit Pro now runs using an
• Video Pro X

  44 answers, most recent on 7/29/2022

  RE: How to do an overlay similar to this sample
  @Former user Hi Gid, No offence taken. Here is what I wrote in the context of your Vegas presentation: You seem to be making it too complicated. Simply use masks. For your Parent/Child and applying an effect to the parent in Vegas, you can do the
• Video Pro X

  27 answers, most recent on 6/9/2022

  RE: VPX14 update replaces VPX13
  @Craigster @johnebaker Hi. I'm not on VPX 14 yet. Still happy with 12. I have noticed over each release that the page filing system has become more problematic. So far though I have only had to do this for the C: drive. A lot of data seems to get
• Video Easy

  4 answers, most recent on 5/25/2022

  RE: Opening GoPro MP4-file result in black playback screen
  Hi Thanks for coming back .. here is some of the response: See the Profile Signature for hardware configuration. All drivers are up to date. Not sure what to show from Program Settings. Just refer to the graphic card. Playback Tab just showing the
• Video Pro X

  25 answers, most recent on 3/25/2023

  RE: [Closed] VPX13: Can I use D-Cinelike? (DJI Mini 3 Pro)
  @Wayne-McIlvaine Hi Wayne. Good news. YouTube does support HDR content but there are a few extra steps to take for uploading before their servers will process the videos correctly. That information can be found here. I have only looked at it
• Video Easy

  4 answers, most recent on 5/25/2022

  Opening GoPro MP4-file result in black playback screen
  I can see the MP4 movie from GoPro running without problem on my Windowsbox, but opening it in Magix Video Easy does not enable viewing. It is visible at the bottom together with a photo, photo shows correct, but the movie blocks and also freeze the
• Video Pro X

  25 answers, most recent on 3/25/2023

  RE: [Closed] VPX13: Can I use D-Cinelike? (DJI Mini 3 Pro)
  @CubeAce Hi, just going to bed so i'll be brief, I don't have VPX but might get it one day so i was curious about this, just to share, Vegas, Hitfilm, Vegas Effects & none of the Boris stuff i have will load that Jelly fish 10bit file, MEP does
• Video Pro X

  17 answers, most recent on 5/21/2022

  RE: Video Pro X 14 Released - What's new? Bug fixes?
  @emmrecs Hi Jeff, Well, they've messed up the third party transitions. I get what you get with Pixelan and Adorage and some even more strange ones, like switching from a Pixelan transition to Adorage then trying to open the settings opens Pixelan
• Video Pro X

  21 answers, most recent on 5/14/2022

  RE: Changing Colors On the Edit screens
  @doug_mccarron Hi Doug. There is a page where I suspect Magix staff do monitor for feedback on VPX 13 if you add the person who set it up in the reply. At least they should get a notification. It's here. The choice for altering colour has been
• Video Pro X

  27 answers, most recent on 4/24/2022

  RE: movie export format
  @AAProds Hi Al. How much 4K editing do you actually do? While I agree with your statement, exporting is the last and final part of editing. The main part is putting it together and if it is anything other than basic editing it is easy to max out a
• Movie Studio

  38 answers, most recent on 1/10/2023

  RE: Upgrade / Update?
  @mojoaudioguru 21.0.2.138     Fixed: Malfunction when processing effects or exporting AVCIntra footage on GPU Mode    Fixed: MPEG2 recording of analog video affected by errors with certain recording devices    Fixed: Storage location for Magix
• Movie Studio

  15 answers, most recent on 4/8/2022

  RE: Where is the information about fixes in updates
  @clement5 So where is the information I want to look at?????????? "????????" We're users, like yourself. We're not employed by Magix. There's no need to shout. The info on updates was available to you when you did each update. For MEP 2022, it
• Video Pro X

  7 answers, most recent on 3/7/2022

  RE: Lower thirds
  I would have to say, on my computer (spec in signature) using Boris Title Studio is painful for me. Same with Newblue FX Titler Pro 7. They have what I am looking for, but for me, too much "pre rendering" and slow performance on the timeline during
• Video Pro X

  4 answers, most recent on 3/2/2022

  VPX13 Viewing, Playback and Export Problems
  Hi, VPX13 v. 19.0.2.150 As you can see from my signature, I have what I consider to be a very high-end machine. Using the same 1920x1080 video clips that I have been using for my examples and tutorials for years now, I can easily get VPX13 (and
• Movie Studio

  43 answers, most recent on 2/26/2022

  RE: MEP 2022 Importing MOV file Issues
  Thanks for the reply. The thumbnails are VLC generated. But dragging the clips to the timeline results in black preview, but the audio plays back. I changed the default player to MPC-BE and still no joy with thumbnails or playback on the