• Video Pro X

  14 answers, most recent on 3/12/2018

  RE: Magix pro x9 is the worst version ever !!!
  you know, the original poster is correct, right? The problem is confirmed by many more of us than bother to chew up our lives in volunteer supported forums that always say 'do a bug report', no? "After I the upgraded my magix pro x9 to 15.0.5.211
• SOUND FORGE

  2 answers, most recent on 2/20/2018

  RE: Suggestions for ExpressFX Dynamics settings
  Without having a sample file, I could not recommend a preset for any dynamics process. That said, I'd first put a hardware comp/limiter on your voice before it hits the A/D converter.For audio files with 'excessive' dynamic range, I like Jeroen
• Video Pro X

  14 answers, most recent on 2/2/2018

  RE: Hardware Choice - Where did I go wrong?
  Hi . . . . Where did I go wrong folks? . . . . IMO - the Intel Core i7-6850K and Nvidia Quadro P1000. NVidia pulled CUDA support from the drivers in favour of NVENC so you have no Hardware acceleration from the graphics card - unless Magix enable
• Video Pro X

  14 answers, most recent on 2/2/2018

  Hardware Choice - Where did I go wrong?
  I thought I would start off my video-editing journey on a strong footing with decent hardware. But it appears I either made poor choices or just did not spend enough. Or maybe it is normal to wait for minutes when applying effects, between each
• Movie Studio

  7 answers, most recent on 1/24/2018

  RE: Burning to Blu-Ray
  Thanks folks. I'll give it a whirl. If still no joy, I'll probably revert to burning on the native DVD drive, which I have done successfully before (with MEP MX). Cheers!
• SOUND FORGE

  2 answers, most recent on 1/17/2018

  Hello Again, I'm Back!!! (Sonic Foundry Forum User check-in Club)
  It's been a long time folks!!! Just checking in to see who is still hanging around from the Sonic Foundry forum club. You know who you are, and you may recognize my forum username if you do. I'ld like to say I'm excited to see Magix adopting what to
• Music Maker

  6 answers, most recent on 11/26/2018

  RE: Special Editions & Purchasing Commercial Licensing (so we can use it)
  Took some digging but I found the answers (thanks to folks like John) Q: Music Maker ships with samples & instruments normally. Do those also require a commercial license? Instruments do not require a commercial license Sound samples
• Music Maker

  4 answers, most recent on 12/20/2017

  RE: MM 2018: how can I activate instruments I had in MM Live 2016?
  @brian-ritchie Here is the list of installation files for MM2016 Live. Look at the
• Music Maker

  4 answers, most recent on 12/20/2017

  RE: MM 2018: how can I activate instruments I had in MM Live 2016?
  OK! I had looked, but didn't spot any subject lines that looked relevant (not sure how I missed the first one I found this time!) I tried searching, but only found posts about missing Soundpools, or folk for whom the problem had just gone away when
• Music Maker

  12 answers, most recent on 12/14/2017

  RE: Unable to install Magix Music maker on windows 10
  Fwiw, I'm using Windows 10 pro, 64bit - downloads are a bit slow from all the humble bundle folks but they are running for me. I'm going to be able to post up all the non-webdownloaders for everything in the humble bundle, but it only comes with
• Music Maker

  12 answers, most recent on 12/14/2017

  RE: Unable to install Magix Music maker on windows 10
  Well I'm not having quite the same issue, but the installer just wont download my version, I have music maker plus I've tried it on two computers and got the same thing. Then i tried adding permission in the firewall, didn't work, disable windows
• Video Pro X

  180 answers, most recent on 12/12/2017

  RE: CANNOT EXPORT MOVIE
  Hi Mark, Just to catch up, you mentioned in a post earlier that you now had a 90min Blu-Ray which just needed some simple corrections. Did you make that on your old system or on one of the new ones? Are the new problems related to using the same PC
• Video Pro X

  3 answers, most recent on 11/23/2017

  Titling - custom template - specifically, formatting text line by line
  Hey folks, I've edited a few videos now, but it has been a while since my last one. I have the latest version of VPX. I'm looking at the titling options for making rolling credits at the end of my film. I didn't care for any of the templates, so I
• SOUND FORGE

  11 answers, most recent on 11/20/2017

  RE: Sound Forge 11 after Windows 10 upgrade
  Some more grist for the mill. Hitting the "new" button brings up an empty but visible panel. At the bottom of the tab are recently accessed files with this address - C:\users\myname\Desktop\file name. Selecting the most recent (still on the
• Video Pro X

  30 answers, most recent on 11/21/2017

  RE: Comments on November 2017 update to VPX, improvements or problems
  Hi Doug, I used to find it quicker to write to DVD than MP4, but since ditching my graphics card and using the Intel i7 graphics, the reverse has been true. Might be a bit early to see what problems may be in the new update, but hopefully folks will
• Music Maker

  42 answers, most recent on 10/22/2022

  RE: Music Maker not allowing me to activate instrument
  What error appears after you add the 2014 serial number?Music Maker 2017 Premium should unlock Church Organ Cinematic Soundscapes Concert Grand Pop Drums Lead Synth Choir Drum Engine Jazz Drums Music Maker 2016 Live should unlock Choir Drum
• Music Maker

  61 answers, most recent on 9/1/2019

  RE: Virtual Instrument Store limited selection
  Thanks Stephen, Thanks for that. So much more helpful than 'support'. Really happy to hear that you are gaining ground on this. Unfortunately I am still in Magix Purgatory. This includes this forum unexpectedly dumping me out twice mid post. Their
• SOUND FORGE

  One answer, on 7/14/2017

  RE: Feature Request for SF MAC = JKL Shuttle
  If you Magix folks do nothing else to SF Mac, please incorporate the industry standard JKL shuttle capability in your first release/update. I can't even imagine what conversations took place that led to the present "random jumping around"
• Music Maker

  No answers, created on 6/24/2017

  MM2016live: Bugs?: Scrubber MouseMode and OnScreen keyboard 'pressure'
  Hi, MM2016 live on W10, All MM and W10 updates, MM re-installed (again), fresh boot w empty new project: Generally the program works as expected and seems 'healthy' in most ways - not too quirky here. Except: A) 'scrubber' mouse mode (ctrl-9) I drag
• Music Maker

  One answer, on 6/22/2017

  Can't find/open Beatbox in MMM2017 Premium
  Hi folks I'm new so please forgive my ignorance. I'm having some trouble locating my Beatbox on my Magix Music Maker Premium 2017. I wish to start making my own beats but cannot find it anywhere. I see on youtube videos, people click one of a
• Movie Studio

  46 answers, most recent on 6/10/2017

  RE: Why doesn't the HVEC work?
  "CUDA / HEVC is not used in disc burn process, only the rendering stage, the burning time is governed by the disc speed, and burner speed capability."  Yes, John. I understand all that. What I am attempting to do is shorten the rendering times for
• Video Pro X

  3 answers, most recent on 5/15/2017

  RE: JOG WHEEL
  HI FOLKS FOUND IT TUCKED AWAY IN A MENU IN THE SOURCE SCREEN
• SOUND FORGE

  13 answers, most recent on 5/2/2017

  RE: Disc won't play
  The folks with Magix finally got back with me. It seems I have CDA 5.2, not 5.0 as stated before. I have been reassured that I can continue to use CDA 5.2 with an upgrade to SF11. As the company I work for begins to upgrade the O.S. for all in house
• SOUND FORGE

  13 answers, most recent on 4/1/2017

  RE: Sound Forge 11.345 still damages sound files
  Well. If you had read the linked posts carefully you cannot deny that this issue is well documented, reported repeatedly and I reported exactly step by step like the other people what I did too. This issue is reproducable if you use the same files.