Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

@Kevin-Finneman Hi Kevin. If you need to commit to discs then your best bet is to record to Blu-ray that will allow HD to be recorded. Unfortunately that would mean two Blu-ray devices. The only other way would be to put a file onto a memory stick

Rescue Your Videotapes!

2 answers, most recent on 11/25/2020

RE: aktivering

Thank you, John, for your advice that solved the problem. with respect to the Driver and USB port. I haven't worked on it so much yet. I have the video running and I tried to store it on the PC, couldn't open the file on the PC, there must something

Other products

11 answers, most recent on 11/25/2020

RE: When trying to record streaming audio I get an error message

John, it is working now, the mike and camera were off, but are now on, so all is well again. I have not used it since my Dell 755 died, I had recorded hundreds of hours of music and had it all loaded on the hard drive in my van radio, yes it really

Rescue Your Videotapes!

2 answers, most recent on 11/25/2020

aktivering

Under mine mange forsøk for å få video overført fra Recordern til PC har jeg avinstallert programmet flere ganger, og aktivert hver gang. Det er nevnt at det maksimum kan aktiveres 2 ganger, hva betyr det i praksis ? Jeg har fulgt

Xara Designer Pro

5 answers, most recent on 11/21/2020

RE: Update Service Failing

@Rob-Russell Hi . . . . I need to know what country you are using so that I can allow it . . . . Have you run diagnostics to determine the ip address and port numbers of the server that is being requested, bearing in mind that the send ports may be

Music Maker

13 answers, most recent on 11/19/2020

RE: Midi Controller(s) not responding

The two things I would try is to unplug the Presonus and see if it works with the inbuilt audio. I would also try pluging the Nektar into the midi input of the Presonus (I believe it has a standard midi port), make the required settings and see if

Music Maker

13 answers, most recent on 11/19/2020

RE: Midi Controller(s) not responding

Thank you but yes, I did arm the midi track record button. I should mention that I do receive audio when using the mouse and PC keyboard. After selecting the midi driver I completely excited out of the software and reopened it. The software does not

Web Designer

3 answers, most recent on 11/18/2020

RE: Web Designer pro uploading to IONOS

Hi John, files have definitely uploaded as IONOS say they can see them as well. But as they don't know anything about Xara they can give no more advice as to why not displaying. Port settings are for SFTP. I will try again today with your suggestion

Web Designer

3 answers, most recent on 11/18/2020

RE: Web Designer pro uploading to IONOS

@Tracey-Thomson Hi Did you compare the Web Designer settings to those you have entered in FileZilla in particular the port settings ? I too use IONOS, however I never use Web Designer to upload web site pages. I prefer to export the site from Web

Photostory

5 answers, most recent on 11/16/2020

RE: DVD writer

@Jutt To answer your second question first: like a large number of companies whose markets are international, Magix chooses to have a user to user forum as the first port of call for potential users who have specific "problems" with their software.

Rescue Your Videotapes!

2 answers, most recent on 11/15/2020

Program does not see my old VHS player VERSION 3.0.1.25

I'm trying to run version VERSION 3.0.1.25 PC is running W10 with all updates applied. The VHS machine is connected to a USB port scart to 3 plugs via the red and white adapter. When I go to try and play something through the video machine the

Movie Studio

One answer, on 11/11/2020

[Closed] Rendering Process

I have a new problem on your Vegas Movie Studio Platinum Version 14. Using this Version 14, I was making a movie and during the "rendering" process while "compiling video", it stopped indicating an error status saying "Failed to connect to an IPC

Movie Studio

4 answers, most recent on 11/8/2020

RE: Connecting DV camera to laptop USB Ports (no Firewire ports available)

@Jamie-Shotter Hi and welcome to the forum. . . . . The DV Camera has a DV firewire port and a mini-USB port. . . . . To record into MEP you need a USB video converter (grabber), eg Terratec, and use this by connecting the camera via the camera's

Movie Studio

4 answers, most recent on 11/8/2020

Connecting DV camera to laptop USB Ports (no Firewire ports available)

Please advise how to connect a DV camera to to a laptop which only has USB Ports. The DV Camera has a DV firewire port and a mini-USB port. I tried transferring videos by mini-USB to USB of laptop, but Magix software didn't recognise device. Are

Movie Studio

15 answers, most recent on 11/4/2020

RE: New Video Editing PC Recommendations

@pcs800 Hi The computer and spec you have linked to is a gaming machine. These do not necessarily make good video editing machines depending on how they have been configured by the manufacturer. The unit you have linked to ticks most of the boxes

Music Maker

10 answers, most recent on 10/25/2020

RE: Cannot see ASIO device

@Housy HI . . . . plugging into the USB A port but via a Targus 4-port USB hub. i could try bypassing the hub and direct to the Surface USB A port . . . . It is worth trying, AFAICS the Targus is a USB 2 device for both in and out and may also be a

Music Maker

10 answers, most recent on 10/25/2020

RE: Cannot see ASIO device

john, i have been plugging into the USB A port but via a Targus 4-port USB hub. i could try bypassing the hub and direct to the Surface USB A port - do you think that will matter?

Music Maker

10 answers, most recent on 10/25/2020

RE: Cannot see ASIO device

@Housy Hi Thanks for the clarification. Is the Surface laptop up to date for both firmware and software updates? I suspect the hanging may be due to USB ports, either trying to switch between speed modes or disconnecting/reconnecting the Boss - I

Video Pro X

6 answers, most recent on 10/19/2020

RE: Socket operation timed out

@Ralph_S Hi Ralph. This could be a Windows internet port setting or an antivirus block. Basically the program cannot connect to the internet and needs to for some reason. Maybe it still has bits of the program to download. Of that I'm not sure. So

Video Pro X

6 answers, most recent on 10/19/2020

RE: Socket operation timed out

@Ralph_S Hi Ralph. This could be a Windows internet port setting or an antivirus block. Basically the program cannot connect to the internet and needs to for some reason. Maybe it still has bits of the program to download. Of that I'm not sure. So

ACID

5 answers, most recent on 10/11/2020

RE: Acid Pro 10 Works Fine For About 10 Minutes Then Audio Goes Silent

@Eric-Penington Hi . . . . I got rid of my Focusrite Scarlet 2i2 Gen 1 and repaced it with the Audient ID4. . . . That would suggest you have hit a recurrent and intermittent problem with the gen 1 version of the Focusrite audio interface having

Rescue Your Videotapes!

23 answers, most recent on 10/14/2020

RE: Magix Rescue Your Video Tapes doesn't recognise VCR

@KAL00 RYVT is not really designed for capturing the output of your two cameras, IMO. I quite regularly have to capture from either a Canon or a Sony video camera. I do use the Firewire connection from the cameras but capture into either Movie Edit

Rescue Your Videotapes!

23 answers, most recent on 10/14/2020

RE: Magix Rescue Your Video Tapes doesn't recognise VCR

Thank you johnebaker I’ll try that one. I’ll only be using it for normal video cassette tapes it appears. I downloaded the RYVT from Magix site. Im trying to record tapes from a Sony DCR-TRV460E Hi8/8mm and also tapes from a Canon MD160 MiniDV.

Samplitude

12 answers, most recent on 10/9/2020

RE: Pro X5 - AUDIO POPS - Random

@Juan-Gonzalez Hi @SP. comment 'Changes on the underlying audio engine from X4 to X5, maybe?' - reminded me that the FocusRite Scarlett can be clicky/poppy depending on the USB port it is plugged into - it works better in a USB 2 port than if it is