• SOUND FORGE

  6 answers, most recent on 8/5/2025

  RE: Having Problems With Sound Forge 17 Crashing Or Otherwise Not Working?
  @GregoryP-Lewis I found a Reddit post where the writer solved the AppHangB1 crash by plugging their HDMI monitor cable into the GPU ports instead of the motherboard ports. Are you using aPC or a
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  @rickduley Hi Rick . . . . You must have an old copy of Bilbo's (PC) specs . . . . I do not have any copy of your system specs, I am referring to the information that is currently in your Signature as shown below:- From the log file, it looks like
• Music Maker

  16 answers, most recent on 1/12/2026

  RE: Midi keyboard not playing live
  @Alex-Kirkwood MIDI ports on the audio interface would only be needed if you own a MIDI device without USB connection. You wrote your MIDI keyboard is a USB device. This means the keyboard has its own internal MIDI interface. Do you still have
• SOUND FORGE

  10 answers, most recent on 10/11/2025

  RE: MP3 files skipping / glitching when opened ...
  @Bill-Fike Please also check in the Windows Energy Options and that your computer doesn't run in energy saving mode and doesn't has USB port energy saving enabled. This might interfere with external USB audio interface.
• SOUND FORGE

  6 answers, most recent on 8/5/2025

  RE: Having Problems With Sound Forge 17 Crashing Or Otherwise Not Working?
  It's a Dell Optiplex 7050 Micro so technically it's a desktop but not a conventional (large footprint) desktop. It has an Intel I7 quad-core 2.84 GHz processor with 32 Gb memory. The HDMI port is on the motherboard and it also has 2 display ports.
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  @rickduley You can use IMGBurn to analyse a blank disk: put it in the drive, wait a few moments, then in IMGBurn, choose Mode>Verify. You can see the disk model number in the MID section: Also, I've found my connector doohicky so I can run my
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  @CubeAce wrote: Having normally both programs is why I often upgrade MMS more frequently than VPX as any additional extras are also ported across to VPX and often also across to Vegas. If they aren't I still have them on MMS. Curious as to what
• Rescue Your Videotapes!

  No answers, created on 5/4/2025

  quand je branche magnétoscope son et pas image
  Bonjour j'es acheté avec licence video saver jes essayer plusieur magnetoscope son mes pas d image je me sui renseigne on madit de changer port usb jes toute esseyer pouve vous me fair un echange ou trouver moi une solusion mercie beaucoup
• Music Maker

  20 answers, most recent on 9/28/2024

  RE: MIDI Issues Out of the Blue
  @dmstar1956 If the settings in your MIDI monitoring app are correct and you don't get any input from your keyboard the problem is caused by Windows and not Music Maker. Firstly, a MIDI port can only be accessed by one application at a time on
• Music Maker

  16 answers, most recent on 1/12/2026

  RE: Midi keyboard not playing live
  @Alex-Kirkwood MIDI ports on the audio interface would only be needed if you own a MIDI device without USB connection. You wrote your MIDI keyboard is a USB device. This means the keyboard has its own internal MIDI interface. Do you still have
• Music Maker

  16 answers, most recent on 1/12/2026

  RE: Midi keyboard not playing live
  @Alex-Kirkwood MIDI ports on the audio interface would only be needed if you own a MIDI device without USB connection. You wrote your MIDI keyboard is a USB device. This means the keyboard has its own internal MIDI interface. Do you still have
• Samplitude

  6 answers, most recent on 12/11/2024

  RE: How to draw in midieditor chord intervals at once?
  @gabor-p Yes, It's perfect for replacing limited MIDI editing options. I additionally use Plogue Bidule and virtual MIDI ports (LoopMIDI or LoopBe) to get pretty much unlimited routing possibilities.
• SOUND FORGE

  5 answers, most recent on 3/6/2025

  USB recording
  I want to record and clean up some cassette tapes (magnetic tape). I can't get it to record from USB. I get the voice part but not the recording in entirety. The only way I get a wave form is when I turn on the microphone on my laptop. But turning
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @Tusk Hi. The USB ports on the motherboard should have colours on the inside of them. You want your USB drive in the fastest one. If you have a USB-C port use that. If not a USB-3 port would be your next best bet. You may not have the latest USB
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @Tusk If you have your monitor plugged into the port of your graphics card and able to see anything at all, I would say you have a working graphics card. In the one experience I had of a graphics card failing it failed completely. Blank screen.
• Movie Studio

  6 answers, most recent on 11/27/2025

  RE: [Solved] Cannot install Video Deluxe 2026
  @Todd-Crandell Welcome to the Magix users forums. The first "port of call" for support is almost always these forums, where users assist each other where they are able to do so. First, in order to try and help you can you give the full name of that
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @Tusk Hi. Again I would like to see some images from your Task Manager. This time from your project drive HDD. Is it an external drive? What are the drive's specs? What type of USB port is it plugged into if external? If internal, again we need some
• Web Designer

  One answer, on 5/9/2024

  FTP update not working not properly using port 22 Xara Web Designer
  I have Xara Web Designer 10 Premium and it does not update the website anymore. I have windows 11. How do I get the port number fixed. It is not an option on setting up ftp to a place other than Magix.
• Movie Edit Now

  8 answers, most recent on 3/25/2025

  RE: Getting Firewire to work on an old laptop fitted with a FireWire socke
  @AnnTH Hi I would like to add a cautionary warning:- On Amazon and many other sites you will find many cables which claim to enable Firewire devices to be connected to a USB port. These are not true converters, they are adapters and will not work
• Music Maker

  15 answers, most recent on 5/22/2024

  RE: Mic sound distorted
  I bought an M audio duo audio interface. I originally had two trs cables plugged in from keyboard to the two line in ports on this interface but then had another trs plugged into the headphone port on interface and then to keyboard speaker port. I
• Samplitude

  6 answers, most recent on 8/27/2025

  RE: where is record audio options mono mix option?
  SP, I really appreciate that tip. I love the old app due to it having a lot of feature missing from the new version but I love the controls the new version implemented to speed up the process. Setting things up in the old and switching it to the
• Movie Studio

  One answer, on 12/12/2024

  [Closed] Capture is not working
  I am using Movie Studio 13.0 Platinum; serial number removed by Moderator in Windows 11. My camcorder is a DCR-TRV340. I am using a Toshiba VCR with composite connections to a hub then to the camcorder. Then the Firewire connection to a Firewire
• Rescue Your Videotapes!

  One answer, on 1/30/2026

  USB Videowandler 2 – video jumps back and forth on Windows 11
  Hi, I’m using Rescue Your Videotapes! (USB Videowandler 2), purchased in 2017. It worked perfectly for years on Windows 10. After moving to Windows 11, the audio works flawlessly, but the video repeatedly jumps a few frames backwards and then back
• Music Maker

  20 answers, most recent on 9/28/2024

  RE: MIDI Issues Out of the Blue
  @dmstar1956 Can you show us a screenshot of your MIDI ports in your Windows device manager? Also enable displaying the devices that aren't currently connected. Maybe your keyboard MIDI interface is still listed there and you need to uninstall it via