• Movie Studio

  25 answers, most recent on 10/22/2023

  RE: Movie Studio 2023 freezing with 4K input
  @Stephen-Fearnley Hi Stephen. Yes it looks like the Intel GPU is not enabled in the Bios. Unfortunately a lot of motherboards have different Bios page layouts and there is no way I can screen capture how to do that even if I had a similar
• Movie Studio

  8 answers, most recent on 2/10/2023

  RE: Best movie format using old DV media footage
  Thanks. So what I have tried is: 1. Created project: with the Movie Settings - HDTV, at 25 fps, and selecting the default FullHD 1080p (W1920xH1080) and 16:9 ratio. I'm not sure if this is in line with recommendations? The automatically adjust new
• Movie Studio

  22 answers, most recent on 1/27/2023

  RE: Dark videos after upload to youtube
  @SSB Hi Looking at the mediaInfo data the original is in the BT.601 colour space, with a TRC (transfer coefficient) of BT.470. Youtube has ignored the BT.470 TRC and set the video to the BT.709 colour space This change will shift colours eg the
• Rescue Your Videotapes!

  10 answers, most recent on 2/7/2023

  RE: Program crashes when 100% saved - result video not playable
  Just an additional remark on this. Curiously that NVIDIA option has now started working fine too. First I thought it is pretty random, but maybe the difference is that I now save the project before generating the clips. That way there is no need to
• Movie Studio

  8 answers, most recent on 2/10/2023

  RE: Best movie format using old DV media footage
  @JeffB2310 Hi Jeff The usual recommendation is to use the same resolution for export and allow the TV to do the upscaling - the TV upscaling hardware does a better job then upscaling in the PC. However, I do believe there is a piece of software whch
• Movie Studio

  21 answers, most recent on 2/7/2023

  RE: MEP 2016 Copying Attributes To Other Clips?
  Hi Ray "Other clips can be on other tracks" Yes of course 🙂 Again the issue was that I should have separeted captures according to topics (I usually do), and just drag each clip into the main project timeline. "The mixer could have been used" Did
• Audio Cleaning Lab

  16 answers, most recent on 3/13/2025

  RE: Family History Cassette Tape Project - Tips to Begin?
  John - Hope all is well with you. I have gone on a few day trips lately to dig into one of our family history mysteries. Have not found the answer yet but gathering some useful clues. It has taken time away from my audio project Just not enough
• Rescue Your Videotapes!

  21 answers, most recent on 1/20/2023

  RE: Downloading Video Easy Software
  @AAProds Hi Alwyn Yes I do, it is an older KWorld device with 32 and 64 bit Win 10 drivers, running on Win 11, and it works with Movie Studio. Any USB video capture device that has the correct drivers installed, from either Windows or the
• Rescue Your Videotapes!

  18 answers, most recent on 4/1/2023

  RE: Increase recording quality?
  @Pierre_S Unfortunately the manual for "Video Easy" is not so detailed. Hmm, ok, I think that is from the current manual, although I can't recall where I got it from now. You should be able to get the PDF from the Help menu. Recording quality was
• Movie Studio

  57 answers, most recent on 8/31/2023

  RE: New Release MMS 2024....
  @me_again Hi Andy. While I don't feel sorry for any software company I do sympathise with the problems they incur. There are always new components and operating systems and people who decide to upgrade or need to replace a broken system so the
• Video Pro X

  9 answers, most recent on 7/3/2023

  RE: Video Pro X changes project frame rate to 20 for no discernible reason
  @eSonOfAnder Hi, Sorry if you interpreted my comment as snide. It was intended to be instructive and to avoid confusion as other readers of the forum may not understand what you meant when you used Hz for frame rate instead of frames per second
• Movie Studio

  24 answers, most recent on 12/1/2022

  RE: MP4 plays fine outside magix, but plays blank/black in magix.
  @deanccino Hi, As @Marc-Goder indicated, get and use Handbrake to convert your screen grab videos. It's free. I have to do this with all of my screen capture videos as Movie Studio really doesn't like them. John CB
• Rescue Your Videotapes!

  4 answers, most recent on 4/10/2023

  RE: Not recording full length
  @Linda-Luu I would wholeheartedly agree with everything that @AAProds has written, especially this: -Is there some big glitch in the tape at the 6 minute mark that might kick off the recording? I do a lot of such transfers for clients and by far the
• Video Pro X

  10 answers, most recent on 6/4/2024

  RE: Video and Audio Desync With Video Pro X 12
  @Ronoco Hi and welcome to the user to user forums. I have not had this happen using files from OBS Studio. Are you recording at a standard video frame rate? IE. 25, 30, 50, or 60 fps? If not I would first try changing that in OBS. I use the
• Movie Studio

  22 answers, most recent on 1/31/2023

  RE: Dropped sound with imported video files from MiniDV tape
  @JeffB2310 Jeff, good to hear. DV can be glitchy; I have had all sorts of trouble with some portions of DV recordings at times. Provided you can capture after the glitch point, to the end of the tape, it is a simple matter to split up the tape into
• Music Maker

  5 answers, most recent on 11/27/2022

  Popup box appears everytime I start an Audio Recording - HOW TO STOP?
  Hi. I'm using MMM 2023 Edition, Premium. Each time I hit the REC button when I'm recording an audio track, there is a very quick "pop-up" window that appears. Sometimes it ruins the timing of my recording. But overall, it's just a general nuisance.
• Other products

  7 answers, most recent on 4/15/2023

  RE: Which Magix video programs will import MKV files directly?
  @mark-sullivan Hi In addition to @AAProds comment . . . . MKV support is still flaky with Movie Studio 2023 . . . . It is, however it is not the MKV file format that causes the 'flakiness'. MKV is a container file format and contain video and audio
• Movie Studio

  24 answers, most recent on 12/1/2022

  RE: MP4 plays fine outside magix, but plays blank/black in magix.
  @AAProds Hi Al, No way. I like it too much. I can live with using Handbrake - batch mode. Corel MultiCam Capture - Computer screen plus webcam (if wanted) to 2 files. It came in a HumbleBundle. John CB
• Movie Studio

  21 answers, most recent on 11/26/2023

  RE: Movie Studio 2024 Suite - audio is suddenly lost
  Hi guys, thank you so much for all your replies and comments and also sorry for not commenting sooner. I was busy with some other things and did not have time for answering sooner. I have compared my settings with the suggested ones and also
• Video Pro X

  9 answers, most recent on 7/3/2023

  RE: Video Pro X changes project frame rate to 20 for no discernible reason
  @eSonOfAnder, @browj2 Hi . . . . I have no intention of using the software again if your responses are par for the course in this forum for people looking for assistance . . . . Given the initial information you provided the answer you have been
• Movie Studio

  27 answers, most recent on 9/19/2023

  RE: "smart resample" + copying individual frame equivalent to movie plat?
  @Former user Hi, Very interesting and we're getting a bit off-topic here. My point was that it would be nice to just copy the image to clipboard and paste it elsewhere (an image program) without having to save the file and using that as the "Copy
• SOUND FORGE

  6 answers, most recent on 1/7/2023

  RE: Music recording plays slower than original speed
  I don't know if I have to uninstall Sound Forge 12.5 to get version 16 to work properly There can be multiple versions of Sound Forge on a PC. I currently have SFP-10, 13, 14, 15 and 16 installed on my Win 10 laptop. However if two versions are open
• SOUND FORGE

  53 answers, most recent on 10/29/2024

  RE: SOUND FORGE Audio Studio 16 – Feedback Thread
  screen capture of iZotope's breath control
• Video Easy

  One answer, on 2/7/2023

  RE: DV Camera
  @Ronde-Nicolaisen Hi Assuming you have Video Easy and the Magix USB Video Capture dongle, the camera should have a composite audio output which you use to connect the DV camera, with the Composite cable you should have with the camera - these