• SOUND FORGE

  8 answers, most recent on 1/1/2022

  RE: SF Pro 15 - How to process automation of FX parameters?
  You can adjust the FX and other paramter envelopes, so it works just like gradually turning a knob on your mixer or hardware FX. Saving your work as a 'Sound Forge project files' <.frg> is non-destructive. The SF Pro 11 & 12 plug-in chain
• Video Pro X

  12 answers, most recent on 7/4/2019

  RE: No work!
  Will Magix intend to introduce full support for hardware coding through an external graphics card? Such a small HandBrake program does it without a problem;) AMD Ryzen without iGPU is not the best choice to work in Magix. I am thinking about
• Xara Designer Pro

  No answers, created on 1/18/2019

  Is inner bevel tool hardware demanding in Designer Pro?
  Hello,I've been using Designer Pro X for a while, try to learn some things, but today I found out, whenever I use inner bevel tool (outer is ok), on a text for example, the program gets stuck for a while and the same thing repeats everytime, when I
• Video Pro X

  10 answers, most recent on 1/30/2019

  RE: Subscription to Video Pro X ?
  I'll wait quietly. Currently, I wonder what happened to the hardware support. The recording shows the use of iGPU at 60% at h.264 and similarly at HEVC. I currently have 20% doing the same test. I even installed the system anew to see if it would
• Movie Studio

  26 answers, most recent on 11/21/2019

  RE: Rendering Time
  I have a similar system to your own and it takes my system much longer than yours (read 4 to 5 times longer) on average to render files. You could try using the HEVC codec which is quicker, (at least it is on my system) but it may heat up your
• Photostory

  3 answers, most recent on 12/28/2018

  RE: Does not export
  @John-Horbacz Hi Thanks for the info. We need more information: What format are any images, video and/or audio files are on the timeline?  Which MP4 export setting did you select and did you change any of the parameters for the export if so
• Movie Studio

  10 answers, most recent on 12/28/2018

  RE: Incomplete removal of borders when using Magix stabilization module
  Thanks for the video clips - I installed the Lagarith codec and tested the stabilisation with Mercalli v2 - I had to use MEP 2019 as my 2016 installation only has Mercalli v4 - and this is the before and after result of a default settings analysis,
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  @RogerGunkel I'm also not sure what you meant about 'changing focus from programme monitor to title effects'. In technical (computer programming) terms it is called changing focus when you click on something else than where the current focus
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  @RogerGunkel A follow-up. Prices and additional extras may vary from country/currency, so it may be worth checking around. Also, as this problem is occuring as å result of changing focus from program monitor to title effects, I wonder if mouse
• Movie Studio

  13 answers, most recent on 12/18/2018

  Frame rate and selecton alignment are wrong for US standard videos
  I am editing a video which has the standard US frame rate for movies of 23.976 and is 75 minutes long. If I try to export a section as an AVI and select the codec, MEP changes the frame rate to 23.98. Then when I continue, MEP says the frame rate
• Movie Studio

  No answers, created on 12/10/2018

  Video alignment problem of long standing
  This has been a perennial problem since the early versions and it still isn't fixed. This problem appears in NTSC frame rates. I have a recent version of MEP on a Windows 10 machine with fairly high end hardware. There are several aspects to it. 1.
• Video Pro X

  24 answers, most recent on 11/28/2018

  RE: [Feedback] How do you like version 16.0.2.301 ?
  Hi. Some of my findings. May have been present also on earlier builds. Hardware acceleration option is not restored when loading own export preset where it is set on. I need to set on separately like picture below. -- Audio effects disappeared.
• Movie Studio

  11 answers, most recent on 11/20/2018

  Burned discs will not play on either of two DVD players
  Recent burned DVDs won't load in either of two player or load with long hesitation or skips and very slowly. These. players easily and accurately load and play discs made 6-10 months ago on the same PC burner and same MEP install. Could the problem
• Movie Studio

  12 answers, most recent on 11/9/2018

  RE: Problem with stereo3d export side-by-side
  Hi Patrick. Sorry, yes I did put W1 not W3 but they both record movies at the same resolutions, frame rates etc. I'm wondering if it was the early addoption of 1280 x 720 being addopted by some as HD for early 'HD ready' TVs. . I'm flying blind I
• Rescue Your Videotapes!

  29 answers, most recent on 10/14/2018

  RE: setting up for first time
  @nickzb Unfortunately, if you don't have "Image Devices" as an entry, the problem is NOT one of an incorrect driver install (I assume there's also nothing under "Universal Serial Bus Controllers"?) In which case, Windows is just not seeing your
• Other products

  2 answers, most recent on 9/22/2018

  RE: 2nd Hard drive failed and cannot remove, modify or reinstal anything!
  Hi, welcome to the Magix forums. I hope I'm understanding correctly your situation: you have a computer with two SSD drives, one, presumably C:\ is your main system drive, where Windows (which version?) is installed; the other disc, apparently I:\
• Video Pro X

  21 answers, most recent on 6/26/2020

  RE: Hardware Acceleration for HEVC encoding
  I tested three situation for H.264 encoding. I used the "MP4 FullHD 1920x1080 59.94p" preset and changed the framerate from 59.94fps to 60fps for all exports. with HWA on and the iGPU connected to a monitor: 34 secondswith HWA on and the iGPU
• Video Pro X

  21 answers, most recent on 6/26/2020

  RE: Hardware Acceleration for HEVC encoding
  @johnebaker sure thing: https://drive.google.com/file/d/1FzsmxUeyqo3FusQa_RRoRGxgXs3AIKEX/view?usp=sharingjust some random Monster Hunter World gameplay. I tested three situation for H.264 encoding. I used the "MP4 FullHD 1920x1080 59.94p" preset
• Video Pro X

  21 answers, most recent on 6/26/2020

  RE: Hardware Acceleration for HEVC encoding
  @johnebaker I went ahead and made sure again that my Intel GPU drivers are up to date. It didn't change anything however. Oddly enough, I do not even get the Intel "Graphics Properties" option when right-clicking on the desktop. I also do not have
• Movie Studio

  4 answers, most recent on 9/7/2018

  Slide is totally black if image intensity reduced for creating SBS 3D
  I am creating an anamorphic side by side 3D video in PAL 4k format using 20s slides. I wanted to overlay text on a reduced intensity slide, but when the intensity is reduced the entire 20s segment is black. Various other changes such as hardware
• ACID

  3 answers, most recent on 8/30/2018

  Acid Pro 8.x Licensing Issues
  Could someone PLEASE explain what is going on here? 'It is possible that your system's hardware has changed' I now have to reconfirm the licence. This is a laptop - the hardware hasn't changed at all because it really cannot change! This is the
• Movie Studio

  8 answers, most recent on 8/29/2018

  RE: Would someone help me Find a GPU that I can enable HWE to help a bit
  @Anishinabefilm Hi .. . . MEP+ 16 . . . Do you mean MEP Plus 16 or MEP Plus 2016? Changing the processor is not really necessary. Assuming you mean MEP 2016, try the following to force the Intel GPU to be used. Open the NVidia control panel and
• Movie Studio

  No answers, created on 8/23/2018

  Dot Mov files from 360 Fusion play audio only no viewable video
  After a computer rebuild I reinstalled Movie Edit Pro Plus 18 and then performed all the updates. I then tried to edit a Gopro Fusion 360 .MOV file. Of course it told me I need to install QuickTime which I did. I tried again and no longer got an
• Other products

  21 answers, most recent on 1/6/2019

  RE: Error: Can't find the name of Intel ICD OpenGL driver
  Hi Michael, It's expected that the problem would show up again after installing a patch, since this reverts the settings changed by the fix back to the default values. The fix has been updated in the meantime. If you're still getting the expired