• Movie Studio

  19 answers, most recent on 4/25/2023

  RE: mpeg-4 codec activation code incorrect
  @bejammin Hi . . . . so it was compressed to where it wasn't usable . . . . Most likely, the bitrate of 1 830 kb/s = 1.78 Mb/s is way too low for 4K UHD video. The ideal minimum bitrate target for 4K UHD at 30fps is about 45 Mb/s, and the maximum
• Movie Studio

  11 answers, most recent on 3/22/2023

  RE: 2.10 v 2.4 GHz Movie Studio 2021 Requirements
  Some info on your CPU: https://www.amd.com/en/product/5916 https://www.thefpsreview.com/2019/08/12/amd-adds-clarification-to-max-boost-clocks-on-ryzen-product-pages/ Comparison with my i5
• Movie Studio

  35 answers, most recent on 9/14/2023

  RE: Frame Could Not Be Calculated
  @sunago Hi James. Would it be possible to name the transition please for us to test in case it is a general problem? It may be that the effect is fine but that trying to mix two file types, frame speeds or resolutions may be the cause of the
• Off topic

  9 answers, most recent on 12/23/2022

  RE: [Closed] Why so slow download speed?
  it's 23th December 2022 and I have the same issue. The music maker downloader download speed caps at 68 KB/s . 😡😣The download will take 4 hours of my time.
• Video Pro X

  5 answers, most recent on 2/1/2024

  RE: VPX15 with long project
  @Betovalle Hi, I haven't done a very long project in quite some time. I do have an ongoing project that is getting quite long overall, but it's spread over a dozen Movies, each of about 15 to 20 minutes. This takes a while to load and save. VPX has
• Movie Studio

  8 answers, most recent on 5/5/2023

  RE: [Closed] Please wait until the installation components are downloaded complete
  @Bernie-Young Hi Bernie, It seems to be a constant problem with Vegas, from what I see, which is why there is often a sticky with direct download links on the Vegas forum. Check there as there is at least one sticky with a link to an emergency
• SOUND FORGE

  6 answers, most recent on 1/7/2023

  Music recording plays slower than original speed
  I have been recording music from a DJ app on an iPad through a Pioneer mixer into my HP laptop and recording using Sound Force 12.5. The laptop uses Windows 10. A common problem I have is that after recording a number of tracks perfectly, all of a
• Movie Studio

  14 answers, most recent on 12/11/2023

  RE: creating panoramas
  @joserobles1941 @johnebaker @Former user @browj2 I don't know how Magix does its stitching of images but I've found a 10% overlap to be sufficient. It is taking care to get the height of each one correct and not adjusting focal length, aperture, or
• Music Maker

  22 answers, most recent on 3/20/2025

  RE: New Install; Music Maker 2024 - Laggy and Crashes
  @johnebaker Hi John, Thanks for responding. ...Do the fans ramp up when Music Maker is left idle for a while after starting?... In terms of the fans, when the program starts up they will increase in speed but settle down if left to idle. If you
• Movie Studio

  11 answers, most recent on 3/22/2023

  RE: 2.10 v 2.4 GHz Movie Studio 2021 Requirements
  @Angelica-Carter Welcome to the Magix user to user forums. First, I'm not sure where you have seen MMS 2021 for sale (I'm not even sure there was an MMS 2021) but MMS 2023 is currently available, on sale here. However, your question about your
• Movie Studio

  14 answers, most recent on 4/8/2024

  RE: upgrade advice - movie studio suite 2023 to movie studio suite 2024
  @spuddy13 Hi Brian. I thought I saw you publish a shortlist of components for a new build a while back but can't find them. If you were thinking of an i5 (12th gen or newer) then that would demonstrably better than my i9900K which is still coping
• Video Pro X

  6 answers, most recent on 9/25/2023

  VPX15 Colour Correction Problem - try to remove bluish tint
  Hi, Here is something to play with. I have some Super8 film with parts that go from normal colour to a very bluish tint and back again a couple of times. Try as I might, I was not successful in even getting close. Here are the images in
• Movie Studio

  13 answers, most recent on 12/7/2022

  RE: Cannot burn movies to: DVD, Blu-ray or AVHD on Movie Studio 2023 Suite
  @CubeAce Yes that's the correct drive. so Burning on any disc should be set to the speed that the Drive can handle? (i thought that would be automatic) so burning to a BD-R the burn speed should be set to x6 or below? all the USB ports on my desktop
• Movie Studio

  13 answers, most recent on 12/7/2022

  RE: Cannot burn movies to: DVD, Blu-ray or AVHD on Movie Studio 2023 Suite
  @David-Kendall @johnebaker @emmrecs Assuming you mean this drive. It seems you have exceeded the maximum burn speed for that type of disc. 2022/12/06 09:56:11 [WARNING] [DiscMaker]: setting no speed limit That device must be connected via either a
• Movie Studio

  13 answers, most recent on 9/21/2023

  RE: Trying to make video with songs and Still images
  @Jay-Rouse Hi and welcome to the Magix user to user forums. From a 'sticky' post on how to ask questions on the forum. This helps speed up and possibly give better answers to the problems people face.   A few tips on posting in the forum: Please
• Movie Studio

  16 answers, most recent on 1/9/2024

  RE: [Closed] Using GPU and CPU together for encoding process?
  Depending on the effects that have been applied to the video/image objects on the timeline, Hardware Acceleration to speed up encoding may not be used.For best performance try: In the program settings, Device options tab, Import, Processing and
• Movie Studio

  10 answers, most recent on 7/8/2023

  RE: Some hints on Desktop Spec for Video Editing sought
  @johnebaker 4k - I see 👍 I thought you were ref to the size of the screen. How much noise is generated when all the fans are running at speed? 😂 It's not that bad most of the time, it ticks away with a quiet fan noise because it's powerful enough to
• Movie Studio

  13 answers, most recent on 12/7/2022

  RE: Cannot burn movies to: DVD, Blu-ray or AVHD on Movie Studio 2023 Suite
  @David-Kendall Hi David. Yes the speed needs not to exceed the recommended maximum burn speed. It can be lower if you don't trust the disks to be of high enough quality. This is due to the 'pits' created by the laser has to be more finely focused
• Video Pro X

  11 answers, most recent on 4/22/2025

  RE: 3 and 4 Point Editing
  @browj2 Thank you for your instructions. Without them, I would not have worked it out and I am not sure anyone else would have either. The difference in setting up a 3 Point Edit versus a 4 Point Edit in VPX is very subtle. I would say too subtle,
• Movie Studio

  23 answers, most recent on 9/18/2023

  RE: [Closed] File size
  @james22taylor  I think that I tried something like you are suggesting and on compiling it, MEP reported that it would take around 12hrs to compile. James, FYI, the length of time to encode is dependent on your system and the program version. The
• Movie Studio

  5 answers, most recent on 3/7/2023

  RE: Install moviestudio2023suite_dlm_geu7q2 crashes on Win 11
  John, Jeff, thanks both of you so much for the suggestions and comments. Per Jeff, I switched back to Gaming drivers, although it seemed to be working ok with the Creativity drivers. Maybe I'll try them again some time later to see if I notice
• Video Pro X

  20 answers, most recent on 3/20/2024

  RE: ASIO drivers and audio handling in general.
  @Kraznet @emmrecs @johnebaker @browj2 Hi. I still maintain that in MMS and VPX the delay for whatever reason is linked directly to the system ram speed. Maybe it is because of the way the rendering engine works. Personally I have no idea but you can
• Samplitude

  24 answers, most recent on 12/23/2024

  RE: Extremely slow download speeds!
  @colin-hardman Hi No problems with download speed, tested just before posting - averaging 20 - 25 MB/s on a 50MB (400Mb)/s connection. Depending on your location there may be data throttling in any of the hops between you and the servers. John
• Movie Studio

  51 answers, most recent on 11/17/2023

  RE: MAGIX Movie Studio 2024 Platinum problems
  @johnebaker @AAProds @Former user @johnebaker Hi John, The original video took well over one and a half hours to load into my copy of MEP 2022. I found the playback really choppy. No audio. Changed audio to track 2 as suggested but at that point