• Video Pro X

  31 answers, most recent on 1/9/2023

  RE: Moving video clip independent of grid.
  @Ronny-George I'm lost here with what you are doing. VPX and other programs that can sync sound, require the same audio recording or rather the same performance. This is usually for multi-cam where 2 or more cameras recorded the same performance at
• Video Pro X

  31 answers, most recent on 1/9/2023

  RE: Moving video clip independent of grid.
  I have increased the frame rate in the hope of being able to move the video in smaller increments. I will look for a work around.Ronny @Ronny-George Hi, I don't think that that will help as you will have to put the frame rate back. Have you put
• Movie Studio

  4 answers, most recent on 5/10/2020

  RE: Question about zooming in Movie Edit Pro
  @jak.willis Hi Jak. Yes! You are dropping resolution all the time. If you were using 4K files and zooming in 50% you would effectively be producing an HD clip (1080 x 1920). You are effectively cropping away image data and enlarging each pixel
• Movie Studio

  4 answers, most recent on 5/10/2020

  RE: Question about zooming in Movie Edit Pro
  @jak.willis Hi Jak. Yes! You are dropping resolution all the time. If you were using 4K files and zooming in 50% you would effectively be producing an HD clip (1080 x 1920). You are effectively cropping away image data and enlarging each pixel
• Movie Studio

  4 answers, most recent on 5/10/2020

  Question about zooming in Movie Edit Pro
  Hello, I have a question about zooming in Movie Edit Pro. When you zoom using size/position or section, does the video start to degrade in picture quality?
• Video Pro X

  7 answers, most recent on 5/7/2020

  RE: Audio and Video in VOB file not sync'd
  Is this an issue of being mis-aligned or losing sync? I have been doing tons of this weekly recently (i.e. receiving footage from a videocam or iphone and syncing to audio from a mic'd source which is mixed from a DAW, and replaces the original
• Movie Studio

  28 answers, most recent on 5/3/2020

  RE: Still have Phantom audio playing in the middle of nowhere
  @johnebaker Smooth filter is a blur effect John. It is a part of the sharpness effect. I don't really know about video, but over sharpening produces what we refer to as 'worms' or white spots appear in still photography and I guess this would help
• Movie Studio

  28 answers, most recent on 5/3/2020

  RE: Still have Phantom audio playing in the middle of nowhere
  Although I can't unfortunately help fix your specific problem, as per my previous reply to your earlier post on the same topic, I'm fairly sure it's probably an obscure bug causing project corruption. Similar to those examples I gave. For instance,
• ACID

  23 answers, most recent on 4/26/2020

  RE: Acid Pro not opening m4a and mp4 files
  @Robert-Seward Why don't you just do the work on the Zoom videos in Vegas Pro then? After all, it's killer feature is that besides being a capable NLE, it's also a fully featured multi track audio editor... I have a current version of Roxio Creator
• SOUND FORGE

  2 answers, most recent on 4/27/2020

  Zero Crossing Points and Snapping
  Considering buying Sound Forge Pro 3 for Mac. Currently exploring your trial version: trial_sound_forge_pro_mac_3--phFpxNTeAGZz9viJRe.pkg I'm using it on a MacBook Pro (13-inch, Mid 2010): OSX 10.10.5 (Yosemite) 2.4Ghz Intel Core 2 Duo 16GB
• ACID

  23 answers, most recent on 4/26/2020

  RE: Acid Pro not opening m4a and mp4 files
  @Robert-Seward Why don't you just do the work on the Zoom videos in Vegas Pro then? After all, it's killer feature is that besides being a capable NLE, it's also a fully featured multi track audio editor...
• ACID

  23 answers, most recent on 4/26/2020

  RE: Acid Pro not opening m4a and mp4 files
  Yes sir, I moderate several forums myself. I appreciate your taking the time to communicate.Zoom is a conferencing program used for businesses and clubs - anyone who would benefit from video collaboration. My role is to edit (OK, bible studies and
• Video Pro X

  16 answers, most recent on 4/17/2020

  RE: How to best deal with Apple (iPhone 11) shot at 30fps vs. 29.97fps
  So sorry for mis-typing. Skip the FCP reference. Everything else stands. iPhone 11 30fps video. Created with Filmic Pro 6 (3rd party video app). Thank you again for the MediaInfo tip:  It says: "...at 30.000 FPS, HEVC" Meanwhile, my primary video
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @Scenestealer @pmikep @johnebaker Hi guys. Thank you all so much for the feedback. It made me sit down and have a long hard think and some of the feedback was quite useful in other ways, making me think about various aspects of settings outside of
• Movie Studio

  7 answers, most recent on 4/9/2020

  RE: Magix movie edit pro 2020 record screen with sound?
  Hi thanks, in the levels box, in the recording drop down it's set at stereo mix, I didn't know you got a separate slider for MEP to control but that can't be turned up without turning the main speakers volume up, you can turn it down separately but
• Movie Studio

  29 answers, most recent on 4/9/2020

  RE: Phantom audio "track" or some audio remnant.
  @FF22 I'm still trying to find out if you are importing your video clips into the editor to one track of two tracks? Are the audio tracks separated onto individual track on importing to the timeline editor or not? I'm assuming from the short and
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @CubeAce @johnebaker All tests were done in MEP19.0.1.23. I have had a close scrutiny of the picture after exporting (zooming the Preview monitor to 800x approx.), comparing Balanced against Best encoding quality in HEVC and H.264, and can reiterate
• Movie Studio

  14 answers, most recent on 3/29/2020

  RE: Zooming to a specific spot on jpg then holding that spot for x seconds
  @FF22 Hi. I do similar to zoom but drag the timeline cursor to the next point and then in the preview window drag the image across to the zoomed position I want then drag the timeline cursor to the next point and repeat moving the image position.
• Movie Studio

  14 answers, most recent on 3/29/2020

  RE: Zooming to a specific spot on jpg then holding that spot for x seconds
  @FF22 Hi, To do this, you need to understand keyframes. There is a quick way to get going by using Effects>View/Animation>Camera/Zoom shot. There is a good chapter in the manual about this. With a video or photo selected on the timeline,
• Movie Studio

  14 answers, most recent on 3/29/2020

  RE: Zooming to a specific spot on jpg then holding that spot for x seconds
  @FF22 I think one of your performance problems is loading full sized images rather than images that have been batch processed to the export frame size of the project. A typical frame from a 4K video clip would be around 4MP. Having any image that
• Movie Studio

  12 answers, most recent on 3/27/2020

  RE: Issues with new version: Losing pointer sync, drop out of sound track
  Thanks for the prompt reply. Win10 Pro. Intel core processor i5-4690 cpu, @ 3,50GHz, Installed memory 16 GM.  64 bit operating system That's the best info unless there's something else to show details without messing too much. I have just ordered a
• Video Pro X

  2 answers, most recent on 3/22/2020

  RE: [Closed] picture in picture does not work
  @David-Cohn Hi, Are you using Video Pro X? The tracks have numbers, so please refer to track numbers. In VPX, track 1 is the bottom or background, track 2 will sit on top of it. If the objects on both tracks are the same size, you will only see the
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  @Richard-Schmitter I just lost uploading a detailed reply Richard so this version will be somewhat shorter. I agree with John that further info may help some people here help you more. I can see your reluctance to upgrade but bewildered by so many
• ACID

  No answers, created on 3/3/2020

  AcidPro 7.0 finally working! Can I do video?
  I finally fixed the latency issue with 7.0 and so far so good but I do have a couple of questions: 1. I have Amplitude but it doesn't show up as a VST when I try to add it. Does Pro 7 not accept Amplitude? 2. I'd love to be able to create music