• Music Maker

  4 answers, most recent on 8/29/2023

  RE: Change in BPM
  @Former user Hi The BPM option is a program setting so will be in force for all projects, including existing projects. Did you save a project, after making the change, and restart Music Maker before loading another project? HTH John EB I recently
• Movie Studio

  34 answers, most recent on 4/24/2023

  RE: stability creates confidence in the product
  @Betovalle Hi, Interesting. I never thought of something like that and don't recall anyone ever asking for it or needing it. To clarify what you have: in Vegas MS you have a setting that gives the time at various points along a clip. If the clip has
• Audio Cleaning Lab

  7 answers, most recent on 3/3/2024

  RE: interference from left mic imported to object/project
  @raoul-beaman Hi, SFAC lab, 32 bit, 23.0.1.22 - that would be the first inaptly titled Sound Forge Audio Cleaning Lab. It's now at version 26, which is SFACL4. Please post a screen shot of the entire user interface. The versions prior to and after
• Movie Studio

  4 answers, most recent on 1/1/2024

  RE: Exporting
  @Betovalle HI . . . . shouldn't there be a log file to facilitate the detection of possible problems like this . . . . There is, with MEP 2013 the burn log file dbk.log should be located in the folder C:\Users\UserName\AppData\Roaming\MAGIX\Program
• Video Easy

  One answer, on 3/17/2023

  RE: Login trouble
  @Christer-Cervin Hi Assuming that you have the old email address and password, email magix at infoservice@magix.net and ask them to merge the old account with the new account you have created here - you may have to wait until early next week for
• Movie Studio

  45 answers, most recent on 2/2/2023

  RE: Timeline colour and selection
  @Mike-Yorkshire Pity you cannot adjust other transitions the same way Mike, on further experimentation, this bug (where the audio fade doesn't occur) only applies to a "Fade In" and Fade Out", which are only applicable/available if the object has
• SOUND FORGE

  One answer, on 3/12/2023

  RE: File saved as MONO not STEREO
  Hi @lee-robin, you probably used a PCM 'mono' preset by mistake. I have done that many times. PCM (wave) files have both mono and stereo 'factory' presets. Stereo is usually the default for most file types. For MP3, AAC and some other lossy formats,
• Music Maker

  12 answers, most recent on 6/9/2023

  RE: Music Maker update 31.0.4.35
  ok, where do I begin, first, why is the un-do/back button not working? Any error I make I have to quickly shut down the program to avoid the error becoming permanent, been 2 weeks now. Second, random shut-downs seem to be increasing. Third, will not
• Music Maker

  9 answers, most recent on 11/30/2022

  RE: No CoreFX for me :(
  @Kenneth-Knudsen If I remember it correctly Core FX was included as a bonus software since the beginning of last week, but not before. If you bought Music Maker last week, you should have a serial number for Core FX listed in your order confirmation
• Music Maker

  10 answers, most recent on 1/10/2023

  RE: ERROR INSTRUMENT
  @Ronins-Tiger Revolta 2 needs MIDI notes on channel 1 to work. Other channels are ignored. Please check the settings of your MIDI keyboard and on which channel it sends MIDI. You can see the channel of the notes easily if you record a short MIDI
• Photostory

  3 answers, most recent on 12/9/2023

  RE: Photo positions lost when changing from storyboard to timeline
  @Brian-Hay Hi, Thanks for the update. Don't worry about the duplicate posts. It can happen, it's just that it's worth checking the forum after you've made any post. That way you should see any duplicate and can delete it. I've just tried to
• Movie Studio

  87 answers, most recent on 4/27/2023

  RE: Video replay speed faster than original loaded video
  @CubeAce @me_again Hi, Ok Ray. I listened to it using WMP and heard the audio right through. WMP gives an error message near the beginning stating that "We can't play the video for P1020363 because its encoding settings aren't supported. You can
• Music Maker

  11 answers, most recent on 1/23/2023

  RE: MIDI Recording Has Wrong Notes
  @Johnny-Smith John (@johnebaker) is referring to the Casio manual. I think he may actually mean p76, rather than 78 (having had a look at it online). I have to admit I haven't seen (or played) a keyboard with a floppy disk drive for a very long time
• Movie Studio

  9 answers, most recent on 2/24/2023

  RE: How to edit a track in details
  @Jane1 Hi, Nevertheless the next time I need to start exactly there where I finished translation the last time,  You don't. You edit the result, that is all. Mute all other audio - no distractions. Put the playback marker at the end of the last
• Movie Studio

  34 answers, most recent on 11/23/2022

  RE: Update Patch to 22.0.3.167
  @johnebaker Hi John. That's about the same difference I'm seeing. What are your drive read write speeds like? How much memory is the Intel GPU grabbing? I'm beginning to wonder if the problem is happening around the transfer of data to the
• Off topic

  3 answers, most recent on 4/26/2023

  RE: [Closed] I need to contact tech support - do you all not have phones any more?
  @Thomas-Franseen Hi . . . . I need to activate my software that WAS working a few years ago. . . . . If you are getting error message ' Error -24 serial number has already been registered to another email address' - you could, however I do not
• Movie Studio

  43 answers, most recent on 11/18/2022

  RE: Is MS 23 still the same terrible interface as they tried in MS 22?
  @CubeAce, the three versions of VEGAS are Vegas Edit, Vegas Pro, and Vegas Post. At the beginning of this changeover, Vegas Movie Studio users were offered an upgrade path to Vegas Pro. You might want to contact Sales to see if they might offer you
• Movie Studio

  33 answers, most recent on 9/22/2024

  RE: some transitions not being implemented after export
  @jim-thorley, @CubeAce Hi Jim, Ray Hi  . . . . did not answer the question I asked about whether NET Framework . . . .  and . . . . fully up to date on windows and net frame work . . . . If the Windows 11 install is up to date the installed .NET
• Other products

  One answer, on 12/8/2022

  RE: Magix Audio and Music Lab 2014 Premium
  @Herminio-Salgado Try the following things: Run as administrator with a right click on the program icon. If this doesn't work you may need to deactivate Smart App Control in the Windows 11 settings. If the program still doesn't work you can also try
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @browj2 Hi John. My third job was working for a London film screen advertising company and part of that job was repairing 35mm film and negatives. Mainly from sprocket damage but also section replacement and occasional proper editing of new negative
• Movie Studio

  32 answers, most recent on 1/28/2023

  RE: Plug In's For MEP2016 Plus
  @CarpentersMate Hi Mike. Have you actually tried to install MEP 2016 onto a new machine yet? This was before my time but internet protocols have changed since then and if you haven't the disk or it needs to connect to the Magix servers to verify it
• Movie Studio

  4 answers, most recent on 10/19/2022

  RE: I can't remember what EFFECTS I used to create this opening title
  @FF22 To me it looks like 'Gentle Breeze' from the Dynamic titles set with the beginning chopped off and the font changed. You could well have doubled it up.
• Rescue Your Videotapes!

  21 answers, most recent on 1/20/2023

  RE: Downloading Video Easy Software
  @David-Dodsworth  it still didn’t like my old serial number, could it be because my version is P2 ? Yes! Serial keys beginning P2 are for very old versions, sorry. In this situation you could try emailing customer support at infoservice@magix.net to
• Xara Designer Pro

  One answer, on 12/31/2022

  Irritating pop-up ads
  I can't even begin to describe how annoying this problem is. I just paid for an update to Xara Designer Pro, and when I close out and even occasionally in the middle of using the program, Magix serves intrusive pop-up ads. I have to tell you I am