• Movie Studio

  8 answers, most recent on 10/17/2023

  RE: How to render with custom frame rate
  Definite bug. On a 59.67 timeline, I just exported an 18" long CFR 25fps AVI to 59.67fps and the file length increased to 45 seconds in ultra-slow motion. Change movie settings to 59.94 and export at 59.94: export works correctly. The problem is
• Video Pro X

  7 answers, most recent on 10/30/2024

  RE: Is there a way to change the timeline seconds? For syncing.
  @jake-h Hi The time scale cannot be changed, however VPX 16 does allow audio to be move and placed between frame boundaries, you must zoom in sufficiently to do this as shown below. Achieving single figure milli second accuracy is not
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  @MME007 Hi Marc. TVs on average have a slower pixel response than that of monitors although some of the newer models are getting faster. As far as I'm aware it is unwise to change the refresh rate of a monitor from your graphics software. Is your TV
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  Hi Marc. The problem with still images is they have no B or P frames. So effectively you are copying all I frames. I tried Al's suggestion and it still looks a bit juddering to me. I think your initial idea of making the pans slower by making the
• Movie Studio

  5 answers, most recent on 8/7/2023

  magix 2023 adding a SINGLE BLACK FRAME to EVERY MOVIE???
  I just noticed it seems for ANY processed clip - magix is adding a SINGLE black frame to the end of the movie. How do I stop that?I.e., I can take any clip (say a 4K video), then click "EXPORT" (i.e., 3840x2160/29.97) - and it adds the stupid extra
• Movie Studio

  10 answers, most recent on 11/16/2024

  RE: Edit pro 17 rotation/mirror effect
  @alflill Hi . . . . Does the keyframe markers need to be used in order to save the effect? . . . . No, you cannot keyframe the rotate button. If you use the rotation/mirror button to rotate the image, the video object does not have the 'Rotation'
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  @MME007 @Former user @AAProds @johnebaker Well I know I have said this before but no-one is going to see exactly the same results down to both hardware choices and software setups. I'm fairly sure even Windows will behave better or worse on any
• Movie Studio

  22 answers, most recent on 7/3/2024

  RE: MP4 variable frame rate and a possible "Cure"
  @me_again Hi, as mentioned this plays without problems in MMS. This is what VP21 shows, the offset at the end highlighted in blue is 12frames, MediaInfo has a different duration for Video & Audio but I haven't tried to work out ms vs frames 🤷‍♂️
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @emmrecs Jeff, never done a 4-frame fade in my life. Been doing butt joins since 2004. Apart from the few times an annoying zit occurs (not caused by the audio waveform, but fixed by adjusting the butt join point), I've never had an issue with wonky
• Movie Studio

  24 answers, most recent on 12/28/2023

  RE: problems with import mov files
  media info: GeneralComplete name                            : G:\Iphone12\2021_06_26_10_53_IMG_8210.MOVFormat                                   : MPEG-4Format profile                           : QuickTimeCodec ID                                 : qt
• Movie Studio

  33 answers, most recent on 9/22/2024

  RE: some transitions not being implemented after export
  @Bol It seems that making some kind of extra adjustment to the video object makes the transitions export correctly, Sectioning the video object also works. I wonder if it makes MMS export/reads those frames individually in some way. The challenge is
• Movie Studio

  5 answers, most recent on 8/7/2023

  RE: magix 2023 adding a SINGLE BLACK FRAME to EVERY MOVIE???
  @Not-Applicable, @Former user Hi The source video is Constant framerate, thus the Variable framerate issue often encountered in video editing does not arise with the black frame issue. I am beginning to wonder if this is a similar issue as I used to
• Video Pro X

  16 answers, most recent on 4/2/2024

  RE: Camera/Zoom shot key framing greyed out
  To reactivate an old subject I've been trying to do key framing for zooming and it's a nightmare. If anyone thinks this new method is logical that you're a better man than I. The add keyframe and copy and paste buttons are sometimes active and other
• Movie Studio

  20 answers, most recent on 7/24/2022

  RE: [Solved] combine clips without interruption
  @Gerry-Lawson It sounds to me like you've got a mid-frame ending on clip 1. Zoom right in and go to the end of clip 1. Now, move the Play marker 1 frame to the left, then hit U. This will trim off the end of the clip, from the Play marker position
• Movie Studio

  24 answers, most recent on 1/9/2024

  RE: 'Effect Transitions Basic' are not exporting in MEP2022 or VPX14
  @browj2 Hi John. At first I thought maybe it is because it needed a fixed amount of frames but the transition time can be altered manually. At first the effect did not work in either MEP or VPX but is now working in VPX. I have no idea why. Having
• Movie Studio

  12 answers, most recent on 8/28/2023

  RE: Size/Position/Rotation is registering a re-position as an animation
  @john-x Hi John. I'm not sure what you mean by & gets rid of the border around the text. There should be no visible border around any text using the text on its own unless you mean the area the text can't be moved to, such as close to the top of
• Rescue Your Videotapes!

  8 answers, most recent on 3/13/2024

  RE: Increase recording quality?
  @AAProds Hi Al. I don't know about video encoding from that perspective but my cameras are capable of recording to12 and 14 bit raw in either lossless, compressed, or uncompressed or I also have the option of 16 bit tiff as well as jpeg. I can see
• Movie Studio

  32 answers, most recent on 7/29/2024

  RE: Deinterlacing-How does Magix do it?
  @johnebaker John, arr, no, I thought you had a 59.94i file. 29.97i translates to 59.94P. 59.94i would double rate to 119.88P. Your videos are showing each field as a frame, so they are 59.94P (double-rate deinterlaced from 29.97i). I can't get the
• Movie Studio

  14 answers, most recent on 8/7/2022

  [Solved] Stuttering video when exporting DJI Mini 3 Pro drone footage
  I have Movie Edit Pro Plus v21.0.2.138 I have imported footage from my DJI Mini 3 Pro, which is 4k 29.97 frames / sec. My project settings are set to the same res and frame rate. When I export as MPEG-4 at certain parts of my output there is
• Video Pro X

  7 answers, most recent on 10/30/2024

  RE: Is there a way to change the timeline seconds? For syncing.
  @jake-h Hi Jake, As @johnebaker already indicated, it is not possible to change the timescale. But you can sync audio and video to a frame accuracy. Do the following: "right click on the audio track and choose Set audio-video offset" Addition to:
• Movie Studio

  16 answers, most recent on 9/5/2025

  RE: Blu-ray media created playback issue. Image bounces/jitters
  @calamar Hi The change (reduction) of frame rate is the most likely cause of the jitters. Try the following: Change the project settings to 1920 x 1080 50fps, the 50 fps helps with conversion of progressive video to Interlaced. In the Burn dialogue
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @ericlnz Thanks Eric, I haven't tackled sound yet but I think I'm going to have to adjust the speed for the video so I will be able make the sound "sound normal". 😉 @browj2 Thanks John, I've since received my latest gadget, a 2" 16mm projector lens
• Photostory

  19 answers, most recent on 12/22/2024

  RE: Can't understand advice given by support team
  @JANET-NICOLAS HI Is this the error message you are getting? If so it means there are gaps between objects in the timeline, on track 1, which do not contain any video or image, these gaps may be very small, ie as little as 1 frame see image below,
• Movie Studio

  10 answers, most recent on 10/1/2024

  RE: Customised Export but still black bars at top and bottom
  @AAProds Hi Al, I often do this when I have exported a 16:9 movie for the family archives and then want to make a square version for Whatsapp: I just hop onto Movie Settings (key E) and change them to Square, then I do a quick re-arrange of my