• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  Ahhhhhhhh - the plot thickens - re: that Intra Codec for those pesky Sony Codecs that VPX11 wanted to install - I quickly plugged in my WiFi modem and it installed real quick (had to be very small file) - message read successfully installed and some
• Movie Studio

  8 answers, most recent on 3/10/2020

  RE: DV-import problem
  @emmrecs Right now the solution that works is "DV" with mpeg, on both computers, but i dont now for how long:) there it shows correct dv camrecord i the dropdown list on the win 10 and " Microsoft Dv camcorder and DVR" on the win 7,there is no good
• Movie Studio

  8 answers, most recent on 3/10/2020

  RE: DV-import problem
  @HakanHiko Can you confirm exactly which IEEE 1394 (Firewire) driver you are using on your computer? I use the Windows "Legacy" driver for both my firewire ports and have no problem. See the attached screenshot below, which is of the Device Manager
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  @Scenestealer Hi Peter. That is correct. That is why I needed the Microsoft codec for playback within Win 7. I think some versions of Win7 or 8 came with the codec while others did not but I'm not sure. @Richard-Schmitter No, I've still had to
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  Actually I have not had an issue with MEP 2019 or 2020 importing or exporting H265 - I was also referring to XP 11 with the update version I listed - XP 10 and early XP 11 releases worked fine as well - XP 10 was slow to encode but read H265
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  @Richard-Schmitter @CubeAce Hi Magix is using the integrated H265 support from Win 10 and Win 7 doesn't support H265 I don't believe this is correct. Magix MEP does not rely on Windows codecs for import and playback. It has it's own embedded. If you
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  Hi Ray, Your observations are right on track - I think most everyone using MEP and even VP-X went over to Win 10 - I say this from the reaction I got from Magix Tech Support - certainly they were not looking at Win 7 problems esp if they were minor
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  @Richard-Schmitter That's interesting to note Richard as I changed over to Win 10 just before the most recent MEP update so never noticed any problems with HEVC in Win 7 when using MEP beyond the long rendering times and my old machine didn't have
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  Hi Guys, I asked the Win 7 question because I came to the conclusion you were all using Win 10 - Magix is coding for Win 10 and not really supporting Win 7 anymore they just aren't publishing this information - there are some major differences when
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  @Richard-Schmitter Hi Richard. Personally I changed up to Win 10 before the end of support for Win 7. Never used Win 8. I think most of us here use our machines for a lot of things other than video editing including surfing the net. I was dreading
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  Hey, petty stupid on my part for not asking but - as a general question - are you guys using Windows 7? - I ask because some of the discussions I relate to and others - I have to wonder why I'm not seeing the same issues and thinking maybe You're
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  Hi, CubeAce You're absolutely correct and I was aware of everything you mentioned - I have 4 workstations on their own Network (off line) and 4 TB of Samsung SSD Raid that they use for Temp Storage and rendering - each station has 2 TB of SSD
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  @Richard-Schmitter I think you are looking at it from the wrong direction Richard. Updates to products and operating systems are mainly keeping up with alterations made to new equipment and alterations to existing software to keep up with the
• Movie Studio

  32 answers, most recent on 3/9/2020

  RE: trying to update the 2019 to 2020 but get error code 57
  Thanks for the suggestions - I tried them all and nothing worked - after extensive research I came to the conclusion that the problem had to be with Win 7 - Like many out there I rarely update Windows because the updates fix one issue and cause two
• Video Pro X

  No answers, created on 3/3/2020

  x 11 and running Win 7 64 on Intel 3.4 GHz I7 CPU - no H265 support?
  H265 video only plays the audio track but video is dark - before this upgrade it worked ? I can generate H265 video and it works on other programs but can't read it's own H265 video back? Video edit pro 2019 reads H265.
• Movie Studio

  32 answers, most recent on 3/9/2020

  trying to update the 2019 to 2020 but get error code 57
  I have tried everything uninstall, delete files, nothing helps - 2019 runs well - all other programs from all software developers works fine running win 7 64 bit - noted this is a big issue on the net with no advice that works from any source - any
• SOUND FORGE

  One answer, on 3/2/2020

  RE: I'm looking for Sound Forge 4.5
  Welcome to the Sound Forge community @bbba Do you specifically need v4.5? I may have a disc or disc image of 4.5 around somewhere. As I recall, pre-SCS versions of SF needed to be installed with an actual installation disc via a physical CD/DVD
• Other products

  3 answers, most recent on 3/2/2020

  [Closed] Sony Movie Studio Platinum 12 OEM - No Registration Server
  I can't register because the server is gone. The program won't let me in without registering! It has my serial number. But it wants me to call support and get an "authentication code". Support here is just this forum. What can I do to get the
• Audio Cleaning Lab

  One answer, on 2/29/2020

  Installation on Win 7 of an old version, previously used under Win XP.
  My installation disk doesn't recognize Windows 7. Latest copyright on the installation disk is 2007. What do I need to do to get a version which will install?
• Movie Studio

  One answer, on 2/26/2020

  [Closed] Vegas Pro 14 Won't Open AVI (XVID codec)?
  Hello - I hope this is the right place for MAGIX Vegas Pro? Please advise if not. - I've logged in at least 4 times trying to read the troubleshooting and downloading Mediainfo, then figuring out where to post that text. The clip is on my son's WIN
• SOUND FORGE

  9 answers, most recent on 2/22/2020

  RE: No more recording after update Windows 10
  I had a Win 10 update change the soundcard operation, it disabled the mic which subsequently blocked all audio going to SF, VP and other recording apps It was some kind of privacy issue setting as I recall. Had same issue with a Realtek 'Stereo Mix'
• Other products

  One answer, on 2/17/2020

  [Closed] Vegas Pro 17 Video Capture failure
  Please help! I am using a Logitech C920 webcam. My system is an Alienware Aurora R8 - Intel Core i7-8700 CPU 3.2 GH, 16 GB RAM, 64 Bit, running on Windows 10. I bought this computer so I could do video capturing and 4k video editing using Vegas Pro
• Movie Studio

  4 answers, most recent on 2/15/2020

  RE: [Closed] Can’t upload video
  Hi Mark. Are you referring to Movie Edit Pro? If so,MEP16 only handles Windows up to Win 7. It can't use anything higher than Direct X 9 that it needs to run. I'm surprised it ran at all.
• SOUND FORGE

  5 answers, most recent on 2/9/2020

  Track EQ, compressor, and noise gate
  I upgraded from SF10 (build 491)/Win7 to SF13 (64 bit build 131)/Win10 and recently decided to reinstall SF10 (build 507) to get access to a few features that I miss from SF10. The track EQ, track compressor and track noise gate plug-ins were