• Photostory

  8 answers, most recent on 8/8/2020

  RE: Straighten routes in Travel Maps
  @GrumpysDad Hi, If you want a rounded corner that doesn't swing way out (if that is the problem), add more points - just before the bend, in the bend, after the bend. It would be nice if Magix would add in a feature to be able to select rounded or
• Photostory

  8 answers, most recent on 8/8/2020

  RE: Straighten routes in Travel Maps
  @GrumpysDad Hi . . . . swings out into the Pacific first. Is there any way of getting right angles in to make it more believeable . . . . Yes, uncheck the option indicated in the image below John EBForum moderator    
• Photostory

  8 answers, most recent on 8/8/2020

  Straighten routes in Travel Maps
  I'm putting a route together in Travel Maps from the UK to San Francisco. When I try to put a second waypoint of San Diego in by bus, it swings out into the Pacific first. Is there any way of getting right angles in to make it more believeable? Or
• Movie Studio

  28 answers, most recent on 8/1/2020

  RE: Black area
  @derek-williams Hi Derek. I haven't ever tried to do this and have tried to follow the thread as much as I can. So the following advice is just based on what it looks like. Not necessarily what it is so you can ignore the advice below completely if
• Movie Studio

  2 answers, most recent on 7/6/2020

  RE: Third Party settings within MEP (Boris Titler) Update findings.
  Update. I tried a real file project with only limited titling using Boris effects. So for a mixed 4K project of 4minutes 50 seconds at the best quality export settings to MP4. With setting Boris Titler in Windows to High performance, the playback in
• Movie Studio

  118 answers, most recent on 6/12/2020

  RE: Masks and the use of the Chroma Key Enquiry.
  @browj2 @johnebaker @terrypin Hi Terry. Yes That's basically it with the odd couple of points that John picked up on. Easy fix once you get into the swing of it. Anyone ready for version 2 now with the basics sorted? I'm just finishing up soon with
• Photostory

  11 answers, most recent on 12/15/2019

  RE: German Bear - US Version
  @David-Robinson5527, @emmrecs Hi I am afraid I would disagree with you both to some extent. I have been playing with this and once you get the settings right, eg displaying the name and file type, uncheck Display square symbols, and allowed it to
• Movie Studio

  8 answers, most recent on 11/29/2019

  RE: Ethical or legal dilemas of use of MEP with T&Cs.
  @browj2 Hi John. Don't worry about me and sound pools. I've spent years collecting sound effects with portable (and not so portable) recorders. Starting with portable open reel machines, then Mini Disc and digital recorders. I've been on beaches at
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @terrypin Hi Terry, Of course, I won't turn the lights on under Dec. 1, assuming that I get them working by then. I managed to quickly get the other version of the BT template with monitor arm working. The monitor swings down. Great fun! Off to
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @johnebaker Thanks for responding John. 1: Both identical monitors bought at the same time from the same batch. 2: using HDMI ports on both at both ends. 3: Always done that in the past for stills editing. 4: Same, but once every six weeks when
• Movie Studio

  27 answers, most recent on 8/12/2019

  RE: Decompressing gopro footage
  @browj2, @Kaywahjay, @emmrecs, @mmcswnavy24 Thanks for the clip John. Imported into MEP - no proxy files generated played smoothly as was. I then cut the video into 3 , applied xfade and swing transition, and Mercalli 2 stabilisation to all sections
• Music Maker

  46 answers, most recent on 5/7/2021

  RE: [Closed] Music Maker 2020 Premium has some bugs. Does anyone else have them ?
  @ralftaro Hi Ralf, Thanks for replying. Track height: Pressing on Tab seemed to fix something and the tracks now got smaller. Prior to that, even the +/- on the vertical scroll bar would not even work. It now works, even after restarting
• Web Designer

  14 answers, most recent on 9/3/2020

  RE: [Closed] Problem with XARA Premium
  UPDATE:  I think I've figured it out!  Gee, I'm so smart . . . For each button I had, under Web Properties, link to file -- Stereo.htm.  This is similar to the way things were done in the past.  Instead I linked it to Web Address, and put the whole
• Video Pro X

  47 answers, most recent on 5/2/2019

  RE: VPX - patch 16.0.2.317
  @Glenn-Woiler Hi Glenn, Swing 1 effect: I tried VPX7 and VPX10 and I can't get it to swing out at the end of an image. Clicking on Horizontal has no discernable effect. The only thing that I can do is Vertical, which changes the swing from the
• Video Pro X

  47 answers, most recent on 5/2/2019

  RE: VPX - patch 16.0.2.317
  @Glenn-Woiler Hi Glenn, Swing 1 effect: I tried VPX7 and VPX10 and I can't get it to swing out at the end of an image. Clicking on Horizontal has no discernable effect. The only thing that I can do is Vertical, which changes the swing from the right
• Video Pro X

  47 answers, most recent on 5/2/2019

  RE: VPX - patch 16.0.2.317
  @Glenn-Woiler OK. Understood. (And my apologies for my last post.)HTHJeff Thanks Jeff for all that. Last time I looked, the Magix folder for VPN said... VPN 8 ! I'll try to get you all the info you asked for. Busy at the moment. My original laptop
• Music Maker

  8 answers, most recent on 2/28/2019

  MusicMaker 27.0.3.32 - Does Not Recognize mxcogg files
  This has probably been going on for a while, but I just noticed it in this latest patch. MusicMaker no longer plays mxcogg files. A couple of years ago, Magix changed the format of Soundpools available for sale through the in-program Store,
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @CubeAce Hi Ray . . . . it's a swinging arm that's ball-raced and adjustably tensioned by a coil spring, similar to a car suspension system. . . . . The steady does look a bit 'flexible', is there any drag setting or fluid damping on it? . . . .
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @johnebaker Hi John. If you mean not fixable in post-production, I was sadly beginning to come to the same conclusion, hence trying out various walking methods and adding an x-axis stabilizer, which also needs some adjustment and somewhat fiddly
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @CubeAce Hi Ray The issue with the stabilisation that you can see ie the bobbing up / down is not fixable, I have had similar issues with my video cameras over the years. If you look at the video below - the distant objects ie mountains are
• Movie Studio

  5 answers, most recent on 5/10/2019

  Crossfades
  I'm a long, long, long time user of various versions of Video Deluxe and MEP. I haven't used MEP for a while but last month I purchased Movie Edit Pro Plus. Getting back into the swing of things I have a question that I've wonder about for the past
• Video Pro X

  5 answers, most recent on 8/8/2018

  RE: Putting a DVD and HEVC file on a DVD+R DL
  @Recycler Hi Mike Thanks for the clarification. VLC vs Movies & TV is a bit of a swings and roundabouts situation - VLC is excellent for playing DVD complete with menu options, however Movies & Tv seems to be better with h.265. To play BD
• ACID

  209 answers, most recent on 3/23/2020

  RE: Shutting down Acidplanet.com
  Even though I haven't posted any songs or videos in three years or so, I'd be lying if I said it didn't make me sad to see the demise of Acid Planet. (My user name over there was/is Annanova, btw). I had so much fun with the 2008/2009 Halloween
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi Mindsong, After reading your post, I tried a quick experiment. For my general 3d for fun, I use either my Fuji W3 like you, or my JVC TD1 which both record a packaged 3d file in one container, so I thought I would try a pair of Panasonic FZ1000s