• Movie Studio

  31 answers, most recent on 3/29/2020

  RE: MEP System Requirements
  @Scenestealer Hi Peter. What a wonderful memory you have.😄 I looked and it's blanked out with a tick in it! Maybe it has to do more with the Graphics card than the processor? Either way I can't change it at present. When I get time I may take the
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  @browj2 Hi John. Beyond not wanting to introduce distortion into your audio, to what end is this important to you? I ask for several reasons because a lot of the old standards are increasingly becoming redundant due to the current technology almost
• Video Pro X

  4 answers, most recent on 2/17/2020

  RE: Why these limitations - improvement suggestions
  @Lowbow As per Jeff's comments, even if you raise a ticket with Magix, you will have to demonstrate much better your problems. See the bug list and some of the videos. Even with all of this, we have had very little action from Magix. Rendering Out
• Movie Studio

  5 answers, most recent on 2/15/2020

  RE: Movie Edit Pro premium freezing, sound continues
  @Coldsnap Can you also tell us the exact format of the video files you are using? The mention of 1440 30fps suggests they may be AVCHD. This is a format which can cause problems for video editing programs because they are "compressed" and must be
• Movie Studio

  5 answers, most recent on 2/15/2020

  RE: Movie Edit Pro premium freezing, sound continues
  @Coldsnap Can you also tell us the exact format of the video files you are using? The mention of 1440 30fps suggests they may be AVCHD. This is a format which can cause problems for video editing programs because they are "compressed" and must be
• Movie Studio

  5 answers, most recent on 2/11/2020

  RE: Audio has changed when imported.
  OK.... the imported audio file is 32bit, 44.1khz WAV. I am a recording studio engineer. I have also rendered files @ 48kHz - same result. Magix seems to compress and change (somewhat significantly) the audio files I put into it. Computer = Dell,
• Movie Studio

  5 answers, most recent on 2/11/2020

  RE: Audio has changed when imported.
  @Roger-Hall In addition to what @me_again has written, it is very useful to we fellow-users, when attempting to offer advice, if you supply the full details about your computer, version and variant of MEP, etc., as detailed in this pinned post. As
• Music Maker

  11 answers, most recent on 2/7/2020

  RE: Fragmented Demo Files.. Bummer first experiance
  @Mark-Mignery Hi Mark, Files are not fragmented. The demo is made up of Soundpool loops, which are from 1 to 8 bars long and that is what you are seeing. You need to learn and understand how Soundpools work. See my tutorials: and the tutorials on
• Video Pro X

  20 answers, most recent on 1/31/2020

  RE: VPX11 17.0.3.63 More Bugs - Moving Cut Point, Object Trimmer Problems
  @johnebaker Hi John, Thanks for taking a look. The bottom left controls allow you to nudge the left Object Border of the selected clip to the left and right on trimmed clips, the same as I showed in the other part for dragging the Object Border
• Video Pro X

  20 answers, most recent on 1/24/2020

  RE: Look at the little sister editor
  @phonebooth Further to John Baker's comments, I should have added that many users have trouble playing back 1 video clip, especially 4k; trying to play 2 or more video clips at the same time can quickly become problematic unless the computer is
• Video Pro X

  20 answers, most recent on 1/24/2020

  RE: Look at the little sister editor
  ​​​​​​Dear @browj2, First of all, thanks for your detailed reply. I may not agree in every point yet, but I appreciate that you're putting so much time & effort in trying to help! Let me answer point by point likewise... I'm using VPX11
• Video Pro X

  20 answers, most recent on 1/24/2020

  RE: Look at the little sister editor
  @phonebooth I'm using VPX11 17.0.3.63. You indicate only 17.0, so which version are you actually using? To answer point by point: I have no problem. Read the manual. Select a camera to start with - the rectangle becomes red. Start playback. When I
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @browj2 @johnebaker @terrypin First, sorry to update what is in effect an old thread but I wanted to put all the problems I've had with Windows 10 and MEP in the same thread for future reference in case I have to rebuild my C: drive at any time in
• Movie Studio

  67 answers, most recent on 2/11/2020

  RE: Movie Edit Pro :.: 19.0.2.49
  Ok, I am aware of this, so my computer's parameters are: CPU: i7-3820@3.6GHz, 32GB RAM, Windows 10 Pro ver 1909 compilation 18363.535, GFX: GeForce GT1030 2GB (driver: GRD441.87), System on SSD (PCIe) 1TB, Data disk HDD (overall about) 10TB,
• Movie Studio

  67 answers, most recent on 2/11/2020

  RE: Movie Edit Pro :.: 19.0.2.49
  I just upgraded to the latest version of MEP 19.0.2.49(UPD3) from MEP 2019 and I have only problems with it. FIRST - all movies in which I used greenscreen and chroma key effect after loading into the new version they look as if they did not
• Movie Studio

  67 answers, most recent on 2/11/2020

  RE: Movie Edit Pro :.: 19.0.2.49
  I just upgraded to the latest version of MEP 19.0.2.49(UPD3) from MEP 2019 and I have only problems with it. FIRST - all movies in which I used greenscreen and chroma key effect after loading into the new version they look as if they did not
• Music Maker

  No answers, created on 1/10/2020

  Live Monitoring while recording issues with MMM 2020 Premium!!!
  My setup is as follows MSI gf63 8rc laptop, Tascam us 1641 interface, roland td15 drums, novation launchkey 49 midi controller, Mackie CR3 monitors and MMM 2020 Premium. I have installed the drivers for the tascam, and i can record through it. The
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  @William-Murphy @johnebaker Sorry, I had to go out to work. Hi Bill. I'm glad you have a solution at last. I think the problem is in the Demuxing (or separation of audio from video). If I remember correctly the video portion of the signal is in the
• Video Pro X

  4 answers, most recent on 1/9/2020

  Movie with rotated content gets clipped on export (no ratio issue)
  I am using Video Pro X (version 17.0.3.63) on Win 10. I have created a movie in 16:9 (1920 x 1080), which runs absolutely fine in playback mode. This is what it looks like (and SHOULD look like) in playback - note that the inner content is actually
• Movie Studio

  4 answers, most recent on 1/17/2020

  Lags after upgrade from 2016 Plus to 2020 Plus
  Hellow guys ! This is just a fast posting, interrupting my work few moments, hopefully I can find a fast solution. I used 2016 plus version, till these days and was working great on my old laptop, as well on my new laptop, but after purchasing the
• Rescue Your Videotapes!

  40 answers, most recent on 2/22/2021

  Importing NTSC VHS on PAL system
  Hello, I'm trying to import my old home videos which are in NTSC using RYVT(Dutch version). The problem is I'm only receiving black and white video. I imported my Dutch videos no problem, when I tried to import my US tapes I ran into trouble. When I
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  @William-Murphy Hi William. Your video file is showing an audio sample rate of 44.1 kHz and your MEP default project settings would be at 48kHz. However, saying that I'm experiencing the same problem you are with playback and I can't get the file to
• Movie Studio

  8 answers, most recent on 4/11/2021

  RE: "Cannot Open Waveform Device" Message
  @k9vet Hi. I wouldn't try copying my buffer example as my PC specs may be way higher than your own. Try slight increments or try switching to another audio driver if you can't reach a compromise between not loading and smooth playback. I also notice
• Movie Studio

  3 answers, most recent on 12/24/2019

  RE: Play back choppy and not playing off time line
  @mike-carioti Hi and welcome to the forum. We need more information about your computer specification, program version and details of the video format and resolutuion you are working with - see this topic for details of what is required. In general