• Video Pro X

  27 answers, most recent on 11/18/2024

  RE: VPX Feedback Button - Features In Consideration/Planning - Comments
  @Betovalle Hi Roberto, So, your request is to fix up Vegas Video Stabilization to have resampling, similar to Vegas Pro, correct? Note that many users here have Mercalli and don't use Vegas Video Stablization. @Can-Dive Hi, First off, Magix has
• Other products

  7 answers, most recent on 7/12/2023

  RE: How to fix no audio track when mp4 imported
  @EditorJim Handbrake, as far as I can tell, always recodes the video, which is probably the time-consuming part. Try AVIDemux, as this allows a straight "copy" of the video independently of the audio, which you can convert. You can either install
• SOUND FORGE

  164 answers, most recent on 9/27/2023

  RE: Feedback on SOUND FORGE Pro 16
  1. I load a 48khz 16 bit file that is 6:12 minutes long2. It takes 10 minutes to resample to 44.1khz I cannot duplicate the above behavior in SFP-16.1.4.71. Down sampling a 48k six minute PCM file took around five seconds. On my my PC, the MP3
• SOUND FORGE

  38 answers, most recent on 10/8/2024

  RE: Sound Forge Minimal Video tools; what do I need next?
  @murrayatuptown Hi Murray. Breaking down your requirements:  . . . . I don't know the video bit rate the 1920x1080 files contain . . . . This is where you need MediaInfo to analyse one a clip from the camera, see this tutorial on how to setup
• Samplitude

  One answer, on 11/29/2022

  Midi objects skip after resampling
  There is a line in the midi object that forces it to skip beat 4 and go straight to beat 1. How do i get rid of this?
• SOUND FORGE

  9 answers, most recent on 1/26/2023

  RE: Export issue-A-LAW or U-LAW 8bit 16kHz adds an artifact at end of file
  As i recall, this issue has occurred before, and was resolved converting the PCM 44.1kHz/16 or 24 bits to s 16kHz / 8 Bit PCM <.wav> in the "Process" menu, Resample to 16k, then convert the Bit depth to 8. Confirm Save or Save as is set to a
• Movie Studio

  87 answers, most recent on 4/27/2023

  RE: Video replay speed faster than original loaded video
  @CubeAce Ray, but did you verify that MEP 2022 is interpreting the file incorrectly in the first place? It's all well and good manually changing settings but that's not the point. The "Adjust" message when I opened it in MMS 2023: Clearly, the
• Music Maker

  20 answers, most recent on 5/18/2023

  RE: BEATBOX 2 WITH NEW 2023 INSTALL
  @Jon-Marinella Hi, Soundforge and Audacity are also full featured DAWs, but you isolate a sound clip, or portion thereof, and can edit it as an object .You can trim it, you can add a volume swell to part of it, you can pitch and time alter it or
• Movie Studio

  30 answers, most recent on 3/4/2023

  RE: Movie Studio 2023 vs Vegas Edit 20
  @CubeAce Ray, thanks for your reply. I still don't quite understand what you mean about flexibility of track layouts. It's easy to place video and audio on adjacent tracks. I do it all the time. And the full waveform in Vegas is "clearer" than
• SOUND FORGE

  11 answers, most recent on 10/12/2022

  RE: How to set bit rate
  It defaults to 41,400 16 bit Is the 41,400 sample rate a typo? Audio files without a video counterpart are typically 44,100 Hz.When you select a 'New' file to record to (in the File menu), set the sample rate to 44.1 kHz / 16 bit.. assuming that is
• Music Maker

  6 answers, most recent on 10/11/2022

  RE: Pitch Change of Independent Imported Loop
  @Michael-Griffiths Hi, Which version of Music Maker do you have? The current version is 2023 - 31.0.1.13. Is your Premium version activated? Music Maker is not considered as a real DAW; Samplitude Music Studio is. Here is what I get in MM2023 with
• SOUND FORGE

  4 answers, most recent on 12/3/2022

  Sound Forge Audio Studio 16 - Ability to seek while mastering
  Hi all,I upgraded my system (PC) a month ago and literally through that whole time I've been trying to find a simple, high quality wave editor for performing a final master on files. It will be used for 'official' masters so it needs to have a high
• Audio Cleaning Lab

  19 answers, most recent on 10/11/2022

  RE: How to restore Payback Speed to normal?
  @goodone2 Yes, I think that if you recorded at 96 khz and then export to 48 khz without resampling the song it would play at half speed.
• Movie Studio

  14 answers, most recent on 8/24/2022

  RE: Wave file wave form is tiny
  @Ian-Schwartz This could just be the waveform display is corrupted. Look in the Project folder and look for any H0 or HDP files and delete them. Then re-open the project and see if the waveforms are larger. If there is no waveform you should be able
• Samplitude

  No answers, created on 6/13/2022

  Resample Problems
• SOUND FORGE

  One answer, on 6/14/2022

  Resample Problems
  I try the use the resample tool in process menu in a file recorded at 48.000 khz and i needed to resample them to 44.000 Khz. The tool do not make any effect the sound keep in the same whitout modification. I have already uninstall the software and
• SOUND FORGE

  One answer, on 6/14/2022

  RE: Resample Problems
  @Frederico-Vieira Welcome to the Magix user to user forums. First, since you are using Sound forge Audio Studio I have moved your post to the correct area of the forum. The tool do not make any effect the sound keep in the same whitout
• SOUND FORGE

  No answers, created on 5/20/2022

  [Closed] (Sticky) Updates for Sound Forge 16
  Sound Forge Audio Studio 16 update, Build 82This maintenance release will fix some issues after the initial release of SOUND FORGE Audio Studio 16.https://www.magix.info/us/forum/sound-forge-audio-studio-patch-2-1-version-16-0-build-82--1299880/ -
• SOUND FORGE

  164 answers, most recent on 9/27/2023

  RE: Feedback on SOUND FORGE Pro 16
  Probably in Appdata> Roaming or Local .. or the Win registry.That said, in both SFP 15 and 16, I have no trouble deleting my custom presets in the resample and bit converter process window by clicking the red X next to the preset title.
• SOUND FORGE

  164 answers, most recent on 9/27/2023

  RE: Feedback on SOUND FORGE Pro 16
  For SFP 15 & SFP 16. Where does Bit-depth Converter and Resample presets being stored? I could not delete my custom presets I created on both.
• Music Maker

  5 answers, most recent on 5/18/2022

  RE: Can I use Saxophonia in other DAWS like Native Instruments
  @BeyondLife You could resample it by creating a MIDI object playing each note (with different articulations and velocities) and then rendering it to a WAV, cutting it and loading the samples into Kontakt.
• SOUND FORGE

  6 answers, most recent on 5/6/2022

  RE: How big of a jump is SFP 16 over 15?
  Hi @Former user, If you initially purchased the SFP-15 Suite and you upgrade to the standard version of SFP-16, the 'Suite' plug-ins will work with SFP-16, but they will not be upgraded unless you upgrade the SFP-16 Suite version. As @SP. stated,
• MAGIX

  2 answers, most recent on 6/24/2022

  SOUND FORGE Pro Patch for Version 16.0 Build 79
  Dear SOUND FORGE Pro users, We work hard on our software and are happy to tell you that we already released a new patch for SOUND FORGE Pro. Patch version 16.0 build 79 includes the following changes: Features: Plug-In Manager View, Explorer View
• SOUND FORGE

  164 answers, most recent on 9/27/2023

  RE: Feedback on SOUND FORGE Pro 16
  Build 79 Scope: The first maintenance release will fix a couple of issues that got visible after the initial release of SOUND FORGE Pro 16. Features: Plug-In Manager View, Explorer View and Organize FX Dialog now contain filter