Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

Yesterday I was using Vegas Pro 14 Edit and whenever I tried to save, it gave me an error something along the lines of not being able to find my license. (I do have a valid license, and have been using Vegas on a project for the last month or so

Movie Studio

26 answers, most recent on 3/10/2020

RE: Where did the key frames go for Title Templates?

@pmikep Hi Mike. You do need a smartphone to activate it and get firmware updates but it doesn't have to be coupled to a phone to work and only shares information with the phone the same as smart phones log positioning when using the connecting app.

Music Maker

No answers, created on 3/5/2020

Using Waves Tune Plugin in Magix Music Maker 2020

I'm trying to use the Waves Tune plugin with Magix Music Maker 2020. I can see the plugin in the Track effects window ("Waves Tune Mono"), but when I turn it on, the audio track just gives a bunch of clicking sounds rather than playing back my mono

Web Designer

4 answers, most recent on 2/27/2020

RE: won't form rectangles

I just researched stickykeys and checked my settings and no, I do not have them turned on.

Video Pro X

9 answers, most recent on 4/16/2020

RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins

@Craigster Hi Craig, Yes, I have Samplitude Pro X3 Suite. I took a look at the Loudness Meter and there is no graph, only the readout, so the two other tools would be helpful. The YouLean Meter can be adjusted to the desired level with the paid-for

SOUND FORGE

No answers, created on 2/24/2020

Suddenly can't play or record a wav file

Yesterday I recorded, edited, and saved a file in wav and saved again in mp3. I did not even turn off my computer but came back today and now Sound Forge 12 will not play a wav. WILL play the mp3. When I try to record I get "An error has occurred

Video Pro X

9 answers, most recent on 4/16/2020

VPX Setting, Adjusting and Analyzing Loudness - Plugins

Discussion on Adjusting and Checking Loudness in VPX11 The Peak Meter in the Mixer of VPX is difficult to work with for any accuracy; there is no indication of actual levels other than the blinking or steady lights. Finding peaks and knowing the

Other products

One answer, on 2/20/2020

[Closed] VEGAS Pro 15.0 (Build 416) - crashes all the time

my rig:AMD Ryzen 7 2700 Eight-Core Processor [3.20 GHz](msi) GeForce GTX 1050 Ti [OC]8 GB RAM on Windows 10 Pro (1909) [64-bit] I know I'm not the only one, but I can't find the solution, I've tried disabling multi-core rendering, setting dynamic

SOUND FORGE

3 answers, most recent on 2/19/2020

RE: Sound file cutting out

Turns out I still have one prob. While I’m recording everything starts out fine. Wave display is being created. Then for example at this last time it was 00:21:50.557 the curser was moving but no wave display I still thought it was recording for

Music Maker

3 answers, most recent on 2/18/2020

Ads make the software feel like spamware

Hello, I'm a relatively new Magix user, and I would like to send some initial feedback. After installing the software, I noticed spammy pop-ups when logging in Windows, that show advertisements for upgrades and whatnot. That really makes me uneasy

Movie Studio

67 answers, most recent on 2/11/2020

RE: Movie Edit Pro :.: 19.0.2.49

Greetings, OK now I'm frightened. This morning, about 15 minutes ago, I turned on the computer and booted up MEP to start the "initialising" sequence as described above. After clicking on the Store tab I was amazed to see that all my content was

Other products

2 answers, most recent on 4/2/2020

Freedrum Dongle not recognized

Hello there, after installing sensorware, I plug in the usb dongle, which pops up under 'Other devices' in Windows 10. After a few seconds, it reads 'Driver error'.When I turn on the sensors, they do not show up in the devices list. Nor when

Video Pro X

20 answers, most recent on 1/24/2020

RE: Look at the little sister editor

@phonebooth Hi, I just remembered that I wanted to check something on this and comment. That is ideal, but should not have to be the case. So long as you are not on this camera when its clip runs out, you should be able to continue. However, I

ACID

4 answers, most recent on 1/29/2020

RE: Can't get ACID Pro 9 Trial to Install

I do have a custom firewall, a piHole and a VPN. I disabled ALL firewall filters, bypassed the VPN, turned off ALL anti-virus and disabled the piHole to no avail. I finally figured it out. I also run my own recursive DNS which does not use any of

Movie Studio

195 answers, most recent on 2/12/2026

RE: Any problems to expect if upgrading CPU/MB/ and operating system?

@Scenestealer Hi Peter. No slightly different results with Calculate VFX on GPU off. Tests were done with it on as well as within the export settings Hardware acceleration was applied where it could be. Results for Calculate VFX on GPU switched

Video Pro X

20 answers, most recent on 1/24/2020

RE: Look at the little sister editor

Dear @browj2, First of all, thanks for your detailed reply. I may not agree in every point yet, but I appreciate that you're putting so much time & effort in trying to help! Let me answer point by point likewise... I'm using VPX11

Video Pro X

20 answers, most recent on 1/24/2020

RE: Look at the little sister editor

@phonebooth I'm using VPX11 17.0.3.63. You indicate only 17.0, so which version are you actually using? To answer point by point: I have no problem. Read the manual. Select a camera to start with - the rectangle becomes red. Start playback. When I

Video Pro X

6 answers, most recent on 1/15/2020

RE: VPX11 - Luminance, RGB curve, Brightness, Contrast, Gamma

@CubeAce For those who do not have VPX but have NB ColorFast 2, here is an image with the Waveform turned on in ColorFast and the Brightness adjusted upwards under Primary Correction. Note that Brightness under ColorFast 2 does not do the same thing

Video Pro X

22 answers, most recent on 1/15/2020

RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting

@browj2 Hi John . . . . turning on Color Space Correction limits (or reduces?) the saturation to somewhere between 75 and 100%, so it would seem that the maximum permitted is more than 75%, less than 100% . . . I have noticed this as well, since

Movie Studio

67 answers, most recent on 2/11/2020

RE: Movie Edit Pro :.: 19.0.2.49

I just upgraded to the latest version of MEP 19.0.2.49(UPD3) from MEP 2019 and I have only problems with it. FIRST - all movies in which I used greenscreen and chroma key effect after loading into the new version they look as if they did not

Movie Studio

67 answers, most recent on 2/11/2020

RE: Movie Edit Pro :.: 19.0.2.49

I just upgraded to the latest version of MEP 19.0.2.49(UPD3) from MEP 2019 and I have only problems with it. FIRST - all movies in which I used greenscreen and chroma key effect after loading into the new version they look as if they did not

Video Pro X

22 answers, most recent on 1/15/2020

RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting

@johnebaker Hi John, For the new Color Space settings of Project Settings/Movie Settings, Magix indicates, "You can now select HDR, Full HD/UHD or SD as color space for your project in Video Pro X. New options for color space within the program

Movie Studio

38 answers, most recent on 3/29/2020

RE: compatability with windows 10

Thanks Ray, it seems that my whole life is posted on youtube! That layout we made for the tv series turned out better than we had hoped, very much a case of the whole being greater than the sum of the parts. The website was ceased a few months ago,

Video Pro X

22 answers, most recent on 1/15/2020

RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting

@johnebaker Hi John, Thank you for your insight. I noticed that under export to MP4, there is no BT.2020 Color Space available, only under export to HEVC. With the exception of one of my cell phones, I shoot in 1080. I sometimes shoot at 2.7k with