• Samplitude

  2 answers, most recent on 12/15/2022

  RE: PRO X / PRO X SUITE
  @T-A I don't think that Samplitude Pro came with printed manuals since 10 years ago. And back then it cost up to $1000.
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @AAProds @emmrecs Hi, Jeff, I have seen this "zero crossing point" on the Samplitude forum and I don't understand what it means. Could you please provide an explanation/demonstration? Al, like Jeff, I always have audio and video on separate tracks,
• Music Maker

  29 answers, most recent on 9/20/2023

  RE: Cannot load my Vita Instruments
  Thank you very much guys for your input but no way to use "old" Instruments in the new MM 2024. That's what Magix support told me: Regarding your issue: I'm afraid what you're describing is program behaviour by design and exactly what you would
• Music Maker

  7 answers, most recent on 4/5/2023

  RE: music maker 2023 is proving to be a buggy mess
  @Ehorner Are you using an USB audio interface with ASIO drivers? This is highly recommended because the standard audio chipsets from your computer's mainboard may be struggling a lot and that's why the program crashes. Humble Bundle currently sells
• Samplitude

  3 answers, most recent on 9/30/2022

  RE: Analyzer
  @Sidiano  Utilisez-vous Samplitude Pro X ou Samplitude Music Studio ?  Je n'utilise pas Fabfilter et je n'ai pas la dernière version de Samplitude, je ne peux donc pas vérifier si ce problème est causé par la dernière mise à jour.  Si vous utilisez
• Samplitude

  5 answers, most recent on 11/5/2022

  synchronisation with external sequencers
  Im a fan of hardware and have a beatstep pro and sq64 but im finding it hard to get them to stop/start with samplitude. Ive managed to get samplitude to start when i press play on the sq64 but it would be great to get them to start with
• Samplitude

  4 answers, most recent on 12/1/2022

  RE: Wave forms are not showing ,up clearly some jumbled mess ,the cursor
  @Chad-Palmer I would suggest you reset the program settings. Open the Samplitude system settings and go to settings import and export and select the a preset from the drop down combobox. Export your settings before in case you want to go back if
• Music Maker

  9 answers, most recent on 4/6/2023

  RE: Objects not recording,reverts back to free version, Asio issues
  Magix crashed again today, right after I chose Magix Asio driver, I could hear good sound through the headphones, but no waveform was produced during the recording and then it crashed. I've been having issues with low sound levels using magix, which
• Samplitude

  5 answers, most recent on 1/10/2023

  RE: Crashes with certain plugins when PreSonus Studio 1 mode checked
  @David-Carpenter7660 I would advise you to contact customer support at proservice@magix.net about this problem. Maybe some professional users at https://community.samplitude.com can help you with it. It's more likely they use hardware controllers.
• Samplitude

  One answer, on 7/7/2023

  output two mono masters from each channel in a stereo recording
  I have some "stereo" 4 track open reel tapes on which were recorded two different mono recordings on the left and right tracks. If possible, I'd like to play the tapes once and record both tracks as if they were a stereo recording and then in
• Sequoia

  2 answers, most recent on 12/5/2022

  RE: New registration of sequoia 16
  @vilius-n Welcome to the Magix user to user forums. Unfortunately, I suspect there are almost no users of Sequoia who visit and post here. However, are you aware there is a dedicated forum for Samplitude Pro and Sequoia here? I would strongly
• Samplitude

  One answer, on 12/27/2022

  RE: why do I have to register everytime it opens
  @Greg-Carlson Im pretty sure Ive asked this in the past but... You did, here! Did the suggestions you received there help? Also, are you aware there is a dedicated forum for Samplitude Pro and Sequoia here? Perhaps you would receive more replies if
• Samplitude

  2 answers, most recent on 6/9/2023

  RE: I want to use MharmonizerMB in Pro X 7 with a vocal track and MIDI
  @Geoff-Milnes Put MharmonizerMB and your audio recording on the first track.Put your MIDI chords on the second track and select MharmonizerMB as the Out/VSTi. This works for me. You can also create harmonies inside Samplitude with the Elastic
• Music Maker

  157 answers, most recent on 12/30/2025

  RE: Wishlist for the next Music Maker!
  Music Maker Wishlist...... -Better controller integration and/or manual setup for all Magix Audio products, MM, ACID, Samplitude, etc. -Maybe a shared system folder and same setup pages in settings for them all?...updated... expanded.. better end
• Music Maker

  12 answers, most recent on 1/14/2023

  RE: Proper sample rate for exporting as WAV?
  OR Would it be possible to play the piece, and then record the feed directly off my sound card into Audacity? I don't have Samplitude and after my experiences with Music Maker I kind of want to avoid buying anymore Magix. Sorry!
• Samplitude

  2 answers, most recent on 11/4/2022

  RE: Changing the Track Name in the Mixer Window
  @Austin-Fitch Hmm, I can only open the Recording Options if I'm not editing the textfield. This means I can type SHIFT+R fine. I'm using Pro X5 on Windows 10. I would suggest you also aks in the offical Samplitude Forum at
• Samplitude

  26 answers, most recent on 6/20/2024

  RE: Samplitude Pro X5 for less than $25
  @MAGIX_Redaktion I just checked the Humble Bundle website and the items like Melodyne and Convology XT are listed in the description of Samplitude Pro X5. Are the buyers of the bundle getting these items? If not, that would a pretty big oversight
• Music Maker

  4 answers, most recent on 12/12/2023

  RE: About live pads
  @HANUMANTHU-RAMANA We are all users like you and not Magix staff. So this isn't "our" software. If you want a professional audio workstation, Magix offers Samplitude Pro X for that task. Music Maker is a tool for beginners and hobbyists or users who
• Samplitude

  6 answers, most recent on 2/25/2023

  RE: Samplitude 2023 -Keyboard no sound after message of crasch
  @pino_g Are you still using the ASIO driver? That is necessary to get live sound from your keyboard input. Make also sure, that the monitoring mode is set the Mixer FX Monitoring Hybrid Engine. You can find the audio settings in the system settings
• ACID

  12 answers, most recent on 9/12/2023

  RE: Magix Independence (latest version)
  Bundled Versions of Independence Pro sometimes only include a license for the VST Plug-in hosted within a supported MAGIX host. If you have Independence Standalone License, then you get two Serials. One for the Standalone application and another for
• Samplitude

  2 answers, most recent on 11/16/2022

  RE: RQ: Please allow .syn plugins to work with Samplitude (and MUMA)
  @Gene-Paul Welcome to the Magix user to user forums. Your first post here has been made to a thread asking about using certain instruments in Samplitude. Unfortunately, your post really has nothing to do with that question and so has been hidden in
• Samplitude

  2 answers, most recent on 5/31/2023

  Vita Solo Instrument Activation incorrect order# message
  I've got Samplitude Pro X5 and it keeps asking me to activate the Upright Bass instrument, but I don't have an order code for it because it was supposed to come as part of the X5 package. I've also been trying to activate the Harmonica instrument
• Video Pro X

  168 answers, most recent on 6/10/2024

  RE: Video Pro X16 - New Features and Bug Repairs
  Next, we use the Mixer. The mixer shows track numbers, obviously linked to the timeline track number. The mixer works left to right. The audio for the background, which anyone who used a DAW, like Samplitude, would expect to be on the first strip -
• Samplitude

  No answers, created on 2/12/2023

  Problem with MIDI recording
  Hello Please help me with recording button flashing and not recording MIDI instrument-I did instalation of MAGIX SAmplitude Studio 2017 again and I did updated version as well. Nothing change. When I try to record on track my sythths its just