• Audio Cleaning Lab

  7 answers, most recent on 6/27/2023

  RE: Recording Error
  @SP. Hi, To import from a cassette player, it needs to be connected to the audio in port of the computer. I'm not sure how this works on a laptop. I presume that it requires a 3.5mm mini plug with the cassette ouputs going to the mic inputs. John CB
• ACID

  One answer, on 2/29/2024

  Brandnew Acid Pro 11 Suite purchase, installed works but no sound?
  Brandnew Acid Pro 11 Suite purchase, installed works but no sound comes out of the HDMI, I have even hooked up the analog Realtek and no go. Can't hear sound on headphones nothing. I am thinking about buying a new sound card and trying that. The
• ACID

  2 answers, most recent on 3/28/2023

  RE: white noise
  First, check to make sure the mic cord is plugged all the way in on both ends; sometimes noise can be introduced if either or both ends are loose.Next, check the input levels on the mic. If the gain is too high, there is a chance for increased
• Video Pro X

  10 answers, most recent on 6/4/2024

  RE: Video and Audio Desync With Video Pro X 12
  @Ronoco Hi AS @CubeAce has commented - use MediaInfo to analyse the OBS recording, see this tutorial on how to set up and get the required information. In the Audio section of the analysis, locate this line Sampling rate                            :
• Movie Studio

  10 answers, most recent on 5/4/2022

  [Solved] MEP2016 Plus (or) Later - Suitable Desktop
  Hello Friends! Hope all is well .... Everyone healthy? I'm finally looking to replace my old Dell 790 and wanted to check back to see if there were any changes/suggestions as to a desirable/compatible system for MEP2016 Plus (or) later versions? I
• Video Pro X

  15 answers, most recent on 3/22/2022

  RE: [Solved] Program freezes when I switch from one film to another
  @profilaxagm With only one port from the nvidia card now connected to a monitor the nvidia control panel should look like this. Windows Display should be showing the following. with two monitors showing. One should be connected to the Intel GPU. If
• Web Designer

  3 answers, most recent on 3/11/2022

  RE: [Solved] Uploading problems to Ionos
  @Les-Pitts Hi . . . . I have read on-line that sites made using Magix either do not upload to Ionos or have problems.  . . . Not true, I use IONOS and have no issues. It is important to use the settings as supplied by IONOS, ensure the protocol is
• Movie Studio

  14 answers, most recent on 2/14/2022

  [Solved] Could not connect to selected device
  Hello, I just purchased this program for my pc which runs windows 10. I have installed a firewire port and I was able to capture my movies from my canon mini dv recorder last night. I was able to transfer 2 of my films, but when I went back to it
• Movie Studio

  30 answers, most recent on 1/9/2022

  RE: [Solved] Bought Moviestudio 2022 today..buggy?
  @Ted-Moores, @CubeAce Hi . . . . . Running 35 parallel tracks on a laptop is probably pushing the system a bit too hard . . . . This would apply if all 35 tracks were occupied - empty tracks do not use up any system resources. The UHD 630 may not be
• ACID

  14 answers, most recent on 7/16/2021

  RE: [Solved] Questioning if Acid Pro is really a 64bit host
  that looks like it might be a generic error that may not related to memory at all. A few other DAWs appear to have people complaining about it in forums, FL studio has a KB article about it. As does Cakewalk. try looking through those solutions to
• SOUND FORGE

  2 answers, most recent on 7/13/2021

  RE: [Solved] Sony Movie Maker Serials Invalid
  I do not think SCS (Sony) versions of Sound Forge and Vegas can still be registered off-line. Otherwise all the SCS user info was ported over to Magix in 2016-17, so activation of legacy versions online can still be done. You must use the original
• SOUND FORGE

  One answer, on 5/10/2021

  RE: [Solved] Sony Registration no longer works
  Welcome to the Magix Sound Forge users forum  @David-Loring. Yes, SCS (Sony) registration no longer works, everything was ported over to Magix upon the acquisition in 2016-17.Download the latest (last) build 507 of Sound Forge Pro 10 from Magix. Log
• SOUND FORGE

  7 answers, most recent on 3/13/2021

  RE: [Solved] I can not use my soundforge 10...
  If you have your serial code, Sound Forge will activate through Magix, you must use the email address that used when it was initially registered with SCS (Sony). All the SCS customer info was ported over to Magix upon the acquisition in 2016. If you
• Video Pro X

  11 answers, most recent on 10/11/2020

  RE: [Solved] OLDER VERSIONS OF A PROJECT?
  @MCK Hi. Are the files on an external drive? If so did you change the USB port it was running from? When you saved your project at the end of your first session did you save as or just save? Did you have the Blue lightning symbol ticked with the
• Movie Studio

  11 answers, most recent on 8/27/2020

  RE: [Solved] MEP2013 Plus - Adding Your Own OGG File For Menu
  @CarpentersMate Hi . . . . esata cables from those rear ports to an externally powered esata enclosure . . . . It is not very often to come across some one using eSATA external drives - eSATA connection has the same transfer data rates as the
• Video Pro X

  16 answers, most recent on 6/18/2020

  [Solved] Firewire IEEE 1394 to USB 2 or 3
  I have old Mini DV tapes I want to capture to my new laptop and edit. Does anyone know what equipment I would need to go from Firewire IEEE 1394 to USB? Is it even possible? OR I have an old Canopus Digital Video Editing System... is there a way to
• ACID

  17 answers, most recent on 4/20/2020

  RE: [Solved] In rewire mode, Acid only shows Master as track output option
  I feel like a complete idiot. After looking at everything in Acid for the millionth time, I added an audio bus to my Acid project and all the ports are available on the new bus. I reassigned the individual tracks from Master to the new busses and
• ACID

  17 answers, most recent on 4/20/2020

  [Solved] In rewire mode, Acid only shows Master as track output option
  I started Acid in rewire mode (as an admin) and was able to add extra mono and stereo rewire ports that Studio One can see. When I try to change the routing in Acid, I only have Master as the output option on all my individual tracks. How do I route
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: [Solved] compatability with windows 10
  Ok, so a follow up to this problem: the Legacy driver turned out to be a very short-lived fix, after the Windows automatic update it appears to have been over-ridden by the later non-compatible driver. Despite many attempts to re-install the Legacy
• Photostory

  3 answers, most recent on 3/14/2020

  [Solved] If I upgrade, I am concerened about my new laptop which has no DVD
  Hello ! Just bought a new Dell Inspiron laptop having no DVD player. I am a windows 7 guy. Now I have to use windows 10, and an external DVD player connected with a USB port. With this new technology, can I still use the newest Photostory the same
• ACID

  10 answers, most recent on 12/3/2019

  RE: [Solved] What's the difference between Acid Pro 8 / 9 / Next?
  Do you only make music with Loops, or do you also use Synths, Samples, etc.? Compare also to Samplitude Pro X4 Suite, which can be had [on super sale] for cheaper than ACID Pro Next, never mind Pro Next Suite. ACID Pro is more like an Arrangement
• Movie Studio

  30 answers, most recent on 11/30/2019

  RE: [Solved] No hardware encoding with Intel HD 530
  @AbbaTheHorse Hi . . . . GTX 1080 but realise CUDA isn’t going to work . . . It wont, CUDA actually refers the the hardware in the GPU chip, then encoder is called NVCUVENC and NVidia dropped the encoder from drivers several years ago, replacing ot
• Music Maker

  4 answers, most recent on 11/7/2019

  RE: [Solved] USB Midi Keyboard not working
  Hiya all, firstly thanks to everyone who responded for their help. So after much fiddling I have managed to get the keyboard working in MM. it seems that I have to use a very specific USB port with a specific cable (not the one that came with the
• Movie Studio

  16 answers, most recent on 10/21/2019

  [Solved] Buying new audio PC-will this graphics card be good enough?
  I'm replacing my ageing audio PC on which I also make/edit videos. I was using Serif Movieplus but am about to buy Movie Edit Pro. I just want to check that the graphics card I've chosen will be good enough to work with Movie Edit Pro. It's one of