• Movie Studio

  49 answers, most recent on 5/28/2019

  RE: How to create distance in audio?
  @FelixDunn Hi Felix. It the sound is static then you may be in with a chance but the graphic equalizers in MEP are limited in frequency bands so that may be difficult although one I think gives the user a control to sweep the frequencies. That may
• SOUND FORGE

  15 answers, most recent on 4/12/2019

  RE: Soundforge 12.1 plug in chain is unusable
  If they told you you one has reported a similar issue they are blowing smoke .......I opened a support ticket on the same issue with waves plugins and Izotope plugins many months ago. I was told they were aware of the issue and stated they were in
• Movie Studio

  11 answers, most recent on 4/3/2019

  RE: Menu templates missing
  @Graham-Swanepoel Hi . . . . I can't find the template in MEP premium 2019 V18.0.2.235. I am sharing the link so you can see the template I am looking for. . . . . It is far from clear which template(s) you have missing, the video linked to
• Samplitude

  4 answers, most recent on 4/2/2019

  RE: Solution for recording from USB Microphone
  @DJCro-G I am glad you have been able to resolve the problem. However, the tone of your first reply to my suggestion to repost in the dedicated Samplitude forum unfortunately shows a similar level of dismissiveness as that demonstrated in your other
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @CubeAce Hi Ray . . . . it's a swinging arm that's ball-raced and adjustably tensioned by a coil spring, similar to a car suspension system. . . . . The steady does look a bit 'flexible', is there any drag setting or fluid damping on it? . . . .
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @browj2 Hi John. I have two microphones I use outside, a Rhode Pro video mic and a stereo shotgun mic with adaptable pickup patterns from wide to hyper cardioid, both of which have isolation mounts complete with their furry friends. The last video
• Movie Studio

  2 answers, most recent on 2/14/2019

  RE: Thanks
  @David-Godfray Hi Personally, I must agree with @ReefHound , there are too many transitions which, IMO, distract from the story you are trying to tell. Additionally I feel the images, need putting into context, ie some text or narration giving
• Movie Studio

  2 answers, most recent on 2/14/2019

  RE: Thanks
  Nice demonstration of the various transitions possible. Personally I'm not a fan of it and 95% of my transitions are straight cuts.
• SOUND FORGE

  8 answers, most recent on 1/1/2022

  SF Pro 15 - How to process automation of FX parameters?
  Hi,I decided as part of building a new PC (Windows 10 Pro) to buy a new license for SF Pro 12. I thought it would be a simple and easy transition, but it has not been.I use Waves plug-ins a lot and I tend to love automating FX parameters such as a
• Other products

  10 answers, most recent on 2/11/2019

  RE: [Closed] Another flaky Magix product!
  @jeff-rippe I apologise if you felt my post was condescending but, without descending to the level of your response, I do need to correct certain factual errors or misconceptions it demonstrates. 1. All the moderators on the Magix forums are NOT
• Video Pro X

  4 answers, most recent on 1/18/2019

  RE: Changing channe or trackl order
  Hi changing track order I have the latest version Video Pro X however the drop down menu next to the track only gives me to multicam, DVD audio track Track height and add track option. it does not have the editing options such as cut, copy and paste
• Movie Studio

  10 answers, most recent on 12/28/2018

  RE: Incomplete removal of borders when using Magix stabilization module
  @abolibibelot2 Hi . . . I would prefer that you remove the demonstration video, . . . No problem - done. John EB
• Movie Studio

  10 answers, most recent on 12/28/2018

  RE: Incomplete removal of borders when using Magix stabilization module
  Thanks for the video clips - I installed the Lagarith codec and tested the stabilisation with Mercalli v2 - I had to use MEP 2019 as my 2016 installation only has Mercalli v4 - and this is the before and after result of a default settings analysis,
• Movie Studio

  13 answers, most recent on 12/27/2018

  Ryzen 2xxx Performance
  Hi all ,   I've been using an old 3770k Intel chip for exporting my Wife's videos for her business up until my new PC build in the last month. This new build is based on a Ryzen 2600x chip. It seems that a 30 minute mp4 output now takes 3+hours
• Movie Studio

  13 answers, most recent on 12/18/2018

  RE: Frame rate and selecton alignment are wrong for US standard videos
  I will take back a claim. When exporting a segment of a video, the frame rate has actually not been changed. I was fooled using VirtualDub to figure the actual frame rate. Using the numbers in the metadata I get slightly different values. So the
• Movie Studio

  88 answers, most recent on 12/3/2018

  RE: Project has Frozen after update using Pro Premium.
  Hi Guys, @CubeAce Raise a ticket. Try to put together something to properly demonstrate the problem, like a short video. Also, add the issue to this thread: https://www.magix.info/us/forum/feedback-how-do-you-like-version-18-0-1-207--1213216/ I
• Movie Studio

  41 answers, most recent on 12/7/2018

  RE: How do I make LOGO STINGERS
  @VideoPro Writing as a forum moderator I would wholeheartedly concur with what @terrypin and @me_again have both written. There is nothing to be gained by taking the attitude your post demonstrates. You are asking for help with a specific problem;
• Movie Studio

  3 answers, most recent on 11/5/2018

  RE: Exported Mp4 to PC, will lose quality if transfer to phone to upload?
  Speaking entirely without experience of doing this, I see no reason at all why uploading what is, essentially, the identical file from your phone or from your desktop/laptop should make any difference at all to the quality of the uploaded file. What
• Other products

  6 answers, most recent on 9/16/2018

  [Closed] The worst Product I ever bought!
  1. I can only post in the US Forum. WTF?! How the heck? I'm in Germany! 2. No way to see what time of the video I'm on (unless I zoom in to max) 3. No way to change the source of an Image or Video Object. 4. 2018 Version or Video Deluxe Premium
• ACID

  2 answers, most recent on 8/30/2018

  Windows 10 issue in AcidPro
  See the video to see what I'm talking about. Happens in SoundForge 6.0 too as I demonstrate. In fact, when I turn my PC on, this window comes up. What's happening? Thanks!  
• Video Pro X

  26 answers, most recent on 10/24/2018

  RE: [Feedback] How do you like version 16.0.1.268?
  Hi all, I just checked. I think I had the Direct Sound to output to my headphones through my M-Audio M-Track interface, which has it's own ASIO driver, but I'm not sure. When I started up VPX, it showed Primary Source - my speakers. I switched to
• ACID

  8 answers, most recent on 7/26/2018

  RE: Acid Pro 8 VST3
  Read This Post please! MAGIX_Redaktion wrote on 4/23/2018, 2:37 AM Dear community, We are so happy to announce, that the loop-based Digital Audio Workstation ACID Pro is back with its first major update in ten years! We completely overhauled the
• Movie Studio

  4 answers, most recent on 7/15/2018

  RE: Trying to create 360 degree movie from video and pic from Insta360 ONE
  Hi Using your video and jpg files from your other question I cannot replicate the issue with getting black holes in exported 360 video. We need to see what editing changes have been made in a project that demonstrates the black hole - could you do
• ACID

  8 answers, most recent on 7/26/2018

  RE: Acid Pro 8 VST3
  Read This Post please! MAGIX_Redaktion wrote on 4/23/2018, 2:37 AM Dear community, We are so happy to announce, that the loop-based Digital Audio Workstation ACID Pro is back with its first major update in ten years! We completely overhauled the