• Xara Designer Pro

  2 answers, most recent on 4/22/2022

  Technical help need here please - I've been trying for 1.5 days!
  Dear Fellow Xara folk, As you may be aware, the inner workings of a rendered Xara web page that is configured so as to 'Scale to fit width' render with the following top level <div> (key attribute highlighted) ... <div id="xr_xr"
• SOUND FORGE

  21 answers, most recent on 4/16/2022

  RE: error when installing
  i only got this in a package and the package was less that sound forge 16 on its own Did the package come from Magix? FWIW, with Sound Forge-10, many folks have experienced an 'Elevated Privilege' issue after a Win 10 update, which requires running
• Web Designer

  4 answers, most recent on 4/10/2022

  RE: The serial number sent to me "is invalid" for Xara Designer Pro X 19.
  Hi John - well, nice try but you are wrong. Firstly, they print a leading "P" just outside the front of the box indicating they know there is a "P" there so don't bother, and secondly the box only holds the amount of the serial number less the "P" -
• SOUND FORGE

  5 answers, most recent on 4/15/2022

  RE: SF Audio Studio 15 wants to install new version of product updater
  Aside for the Update Notifier annoyance, SF-15 is solid on most PCs, the same for SF-16. I would first try a reset. Open SF, go to the 'File' menu and select "Reset and clear cached data". Close and restart Sound Forge. If that does not help and it
• Music Maker

  3 answers, most recent on 4/6/2022

  Where to find the tutorials for Music Maker?
  Cheers folks, has anyone found the tutorials for getting started using Music Maker? Thank you
• Movie Studio

  4 answers, most recent on 3/26/2022

  Password Registration Problems
  Hi folks. I've had a number of older MEP software dating back to MEP 14 Plus to MX and beyond and also a Vegas Pro or two and the trouble seems to always be with the updating and registrations and downloads. To get these updates (eg. Mpeg 2 and Mpeg
• SOUND FORGE

  One answer, on 3/20/2022

  RE: Plug in chainer
  Hi @dave-eberhardt, The chainer was changed to a modal design starting with (Sony) Sound Forge Pro 11 and many folks prefer the legacy non-modal UI. It certainly would be nice if were a switchable option.That said, it basically works the same as the
• ACID

  2 answers, most recent on 3/14/2022

  RE: Locate and install upgrade from Acid Pro 10 to Acid Pro 10.5
  Thanks for your response. Yes, I just figured that out a little while ago when I ran across a post from April of last year. https://www.magix.info/us/forum/acid-pro-10-5-upgrade--1272927/?page=2) Seems like this could use a fix or clarification so
• SOUND FORGE

  164 answers, most recent on 9/27/2023

  RE: Feedback on SOUND FORGE Pro 16
  My custom keyboard command to lock channels together (Alt+ L) causes my Win 10 PC to log-out the user. The legacy SFP and SFAS versions never exhibited this behavior. Many folks may not encounter this though, as it is not a default keyboard command.
• Movie Studio

  179 answers, most recent on 4/16/2022

  RE: Video Pro X12
  Fwiw, the X12 manual only shows V2. I have also emailed proDAD support to ask abut this. The folks at proDAD said to reach out to MAGIX, so I did that this morning. We shall see...
• Movie Studio

  10 answers, most recent on 3/5/2022

  RE: Program Requires Extra Component - MPEG2 Codec MainConcept
  Hello John and others ... Just to clarify: no the Mini Tape function is a separate SD recording function. This camera is capable of recording in TWO separate formats: Mini DV Standard Definition, 'and' HD 1080 from the P2 Flash Card. Some folks are
• Movie Studio

  10 answers, most recent on 3/5/2022

  RE: Program Requires Extra Component - MPEG2 Codec MainConcept
  Hello John - (thanx for the comment). I just left an additional comment: Some folks take the P2 card out of the camera and plug it into a slot using alternate software? Would that add anything new to the discussion?  
• Movie Studio

  10 answers, most recent on 3/5/2022

  Program Requires Extra Component - MPEG2 Codec MainConcept
  Hi Gang For experimentation, I've switched camcorders - trying to get MEP2016 Plus to recognize a similiar Panasonic Camcorder. This one is a Panasonic AG-HVX200K P2 Older HD Camcorder (Limited to 1080). Not surprisingly I recieved the prompt
• SOUND FORGE

  2 answers, most recent on 2/27/2022

  RE: Volume Maximizer
  Welcome to the Magix Sound Forge users community I like Sound Forge Pro's legacy two-stage Wave Hammer @tony-souza for some music projects due it's vintage 1176 FET sound. Wave Hammer has an initial compressor/limiter stage and a secondary volume
• SOUND FORGE

  9 answers, most recent on 2/22/2022

  RE: Recording Delay
  Try another device driver for playback. You may want to try the ASIO-4-ALL driver which works well for many folks You must have (or had) Audio Studio installed at some point since SF Pro does not install the Magix Low Latency 2016 driver:driver.
• Movie Studio

  26 answers, most recent on 2/18/2022

  RE: Can't open MS15 files in Movie Studio Platinum 2022
  This is EXTREMELY poor form. Magix truly dropped the ball on this one and this is THE LAST "Upgrade" I will be falling for from what has turned out to be a truly pathetic company. There was a time when the original creators of the Movie Studio Suite
• SOUND FORGE

  10 answers, most recent on 2/19/2022

  RE: How do I turn the limiter off when recording?
  It certainly appears there is some kind of limiting happening. I would look at your soundcard/interface settings. Is the audio distorted some? Many folks make the mistake of feeding a line level signal (-10 or +4 dBm) into a microphone level input
• SOUND FORGE

  6 answers, most recent on 2/17/2022

  RE: -59 Error after Bluscreen from MOTU driver
  Glad it worked out, Revo Uninstall is faster and much more thorough then trying to manually deleting all the many data files and registry entries the default uninstall leaves behind. The free version is adequate in most cases and the pro version
• Movie Studio

  11 answers, most recent on 2/6/2022

  Extracting/Converting VOB's For Movie Time Line
  Hi Gang Hope everyone are doing fine and had a nice New Year Holiday. Was wondering if MEP2016 Plus had an option for extracting VOB's? In the past I got satisfactory results, (files to be inserted in a movie time line), using 'Wondershare' Whether
• SOUND FORGE

  4 answers, most recent on 2/4/2022

  RE: How can I add Wave Hammer to my Sound Forge 12.6
  I wonder if there's another achieving the same result with iZotope or some free VST Apps? I am not aware of any that sound the same as the legacy Wave Hammer. Otherwise there are more comp-limiter-maximixers than I can count that are available for
• SOUND FORGE

  5 answers, most recent on 1/17/2022

  RE: Batch converting
  The new batch tool has been a 'work in progress' for sure.In most cases, I would think most folks only want the files in the selected folder. An option would be nice, or even the ability to select multiple folders at once. Contact Magix and request
• Web Designer

  5 answers, most recent on 1/17/2022

  RE: Cannot download content from online catalog
  Folks, I still cannot download anything from your online catalog. Please help. Thanks, Lee
• Web Designer

  10 answers, most recent on 1/17/2022

  RE: How do I enable vertical scrolling when viewing a web page?
  Folks, I am still waiting for suggestions on how to enable vertical scrolling for a web page designed in Web Designer Premium. Thanks! Lee-Wise  
• Video Pro X

  2 answers, most recent on 1/17/2022

  Searchable list of objects
  I am scanning motion picture film. On each reel I have many folks and most of the folks are on several reels.  I then need to edit the scanned video of each reel and create individual clips, name the clips and be able to search for those clips to