• Music Maker

  14 answers, most recent on 11/9/2019

  RE: missing soundpools
  Hi there, thank you for getting back to me, i am so sorry i have tried to recover them but ive had no luck. i am using music maker premium edition 2019, the serial No is Removed by Moderator I purchased all my soundpools from within Music
• Video Pro X

  16 answers, most recent on 10/29/2019

  RE: VPX11 Patch 17.0.2.47
  Thanks muchly, John. I'm not too bothered about the terminology, ducks are usually damp, anyway! 😃 I admit that I was unaware of the 'damping' (Alt+L) feature; I looked at the manual and found only the 'ducking' one. This feature is also the final
• Movie Studio

  28 answers, most recent on 10/24/2019

  RE: MEP 2020 TK2 Bug
  @Richard-Curtis, @browj2, @Scenestealer Hi As I see it the issue with interpolated frames and stabilisation is a result of how the 2 effects are working/applied with the source video. This is what I suspect is happening: Stabilization parameters
• ACID

  2 answers, most recent on 10/5/2019

  RE: Issues with MIDI in Acid Pro 8
  @sheppo Yes, I've tried to maximize, minimize, everything in-between. It seems to be a bug. It solved itself for a bit until today, where out of nowhere it began doing it again on a track I had just about finished. Tried starting a new track, and of
• Movie Studio

  One answer, on 9/20/2019

  MAGIX Movie Edit Pro 2015 Plus reports odd frame rates during export
  All of a sudden MAGIX Movie Edit Pro 2015 Plus reports erroneous frame rates during export.The raw video is okay. It's when I place it on MAGIX Movie Edit Pro 2015 Plus that it shows a minimized frame rate in the preview window. Exporting then
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @CubeAce Hi Ray Here is a google translation of the said article from Videoaktiv on line magazine where a Magix Product owner developer Florian Liepold discusses the Infusion Engine in MEP2020. Q. The infusion engine should be up to 5.8x faster - in
• Movie Studio

  17 answers, most recent on 8/31/2019

  RE: Name the tracks!
  Hi @johnebaker ;) Here is my "4 looks" ...."Big" "Default" "Small" "Minimized" i dont get the same look as you 😏 im running Movie Edit Pro Premium (latest version) which version are you using?
• SOUND FORGE

  6 answers, most recent on 8/21/2019

  RE: Can the Recording Volume in sound Forge be adjusted?
  If the audio is getting into SF, there has to be a reason why the levels are very low, keep looking, Otherwise, recording at a higher bit depth (24 or 32) will help minimize additional noise when you normalize it up to a usable level.
• Movie Studio

  22 answers, most recent on 8/21/2019

  RE: Animated straight line between any two points
  @johnebaker Timely point, John. Yes, I did, maybe 20 years ago. Perhaps it’s time to play with it again soon. Although the masking methods give a fast result with minimal effort, I’d still like to find a neat way to draw a straight line at any angle
• Music Maker

  6 answers, most recent on 7/25/2019

  RE: MMaker 28 Update Fails on Win10
  Hi John, apologies for the sarcasm - thought it was a copy/paste answer (used to bad answers from Microsoft). After taking the steps there was no change to functionality. The tracks do not maintain the width you set - if you minimize width on all
• Music Maker

  4 answers, most recent on 12/18/2019

  MusicMaker 2020 - Totally depressed - All my own fault
  Hands up straight away. My system is fritzy, so a lot of this is probably my own fault - however I don't have issues like this with any other software. I had a lot of issues last year with the MusicMaker 2019 update. Firstly it wouldn't load for
• ACID

  12 answers, most recent on 12/26/2020

  RE: Are any of the new versions of ACID actually stable?
  I've been using AP9 since it launched, and have had minimal issues........the initial loading of VSTs is still a bit of an issue, but a rescan upon loading, loads any of the missing VSTs .........
• ACID

  5 answers, most recent on 8/28/2019

  Acid 8...issues.....can you guys get these fixed??
  I have been using Acid since the first version. I have always been a loyal customer...purchasing Acid, Sound Forge, Vegas, Steam Anywhere, and many many Sample CD's. I was very active within the community ...winning the Jungle Brothers Remix contest
• ACID

  19 answers, most recent on 6/30/2019

  RE: Just installed Version 9
  Seems like this post lost it's way a bit and I appreciate you guys. Following are my problems with it and have been for years, which made me move on to Ableton but I am dying to come back to Acid but it's not letting me. 1. Why doesn't the playhead
• ACID

  19 answers, most recent on 6/30/2019

  RE: Just installed Version 9
  Seems like this post lost it's way a bit and I appreciate you guys. Following are my problems with it and have been for years, which made me move on to Ableton but I am dying to come back to Acid but it's not letting me. 1. Why doesn't the playhead
• ACID

  19 answers, most recent on 6/30/2019

  RE: Just installed Version 9
  Dude I feel Like I could have written this. These guys rushed this release Yup! I just opened the DAW, I opened Ableton on the side to make sounds, and guess what, the minimize buttons on the top right corner are buggy, too. Man!! I feel trolled! So
• Video Pro X

  12 answers, most recent on 6/4/2019

  RE: HD Archive Settings
  @discburn Hi Seamus, 70GB = 3 or 4 BR disks. I back up all of my source material (eventually) to BR. The cost is minimal. If you ever have to go back and edit the video, it will be to add something that you no longer have. Murphy's laws
• SOUND FORGE

  5 answers, most recent on 5/20/2019

  RE: Sound Forge 4.0
  I'm very long time used this software: Sonic Foundry 4.0-6.0Sony 7.0-11.0Magix 12.0- Graphical nearly same 4.0-7.0. I'm used long time 7.0 version. (Windows XP, XP x64, Windows 7 x64) Used now in paralel 7.0, 11.0, 12.0x64. (Magix version compressed
• Movie Studio

  6 answers, most recent on 5/16/2019

  RE: Magix MEP Version Compatibility
  Hi John CB Nice to see you again. As mentioned my needs are minimal for what I'm doing right now until I settle on a 'workable path.' Part of the reason is due to my current limited processor capability. Same reason for choosing MEP 2013 Plus &
• SOUND FORGE

  2 answers, most recent on 5/28/2019

  Window Full Size
  Sound Forge Pro 13. Whenever the application is minimized, it does not come up full size the next time. The window button at the upper right shows that it's full screen. It's full screen horizontal but not vertical. I have to press the screen button
• Music Maker

  8 answers, most recent on 5/6/2019

  RE: Upgrading from MM2019 to Samplitude Music Studio2019
  Thanks John. A magix support person has offered me a free upgrade to Samplitude and I have requested that it be Pro X4 Suite. Whether he will agree to that I do not know but I don't see why not considering I have spent an extra £100 on material from
• Video Pro X

  19 answers, most recent on 5/15/2019

  VPX Crashing when importing PNG File
  Hi All.I'm hoping someone can replicate this issue.I have recently been trying to import PNG photo's and logos and every time, it causes VPX to crash.I am currently using version 298 but I have installed 322 to my test laptop and the issue is still
• Music Maker

  11 answers, most recent on 4/15/2019

  RE: UMC404HD Audio interface
  Hi John. That was one of the first things I did. As long as I know how to get it working with minimal fuss, I can manage. Thanks for your help. I've uploaded some tunes to the media section if you want to take a look at what I've created so far.
• Music Maker

  37 answers, most recent on 4/9/2019

  RE: Audio Rec with Deepmind 12
  @Former user IMO the interface you linked to is more than adequate for what you want to do. You will use three of the four inputs in your current set-up, two for the synth and one for mic, so one "spare". OTOH, I'm honestly not sure it offers any