• Movie Studio

  10 answers, most recent on 3/17/2019

  RE: 'Jerky' movement of transport items in finished edit.
  @raoul-beaman, @ericlnz, @CubeAce This issue of 'jerkiness' is one of the downsides of using Progressive scan video, irrespective of the recording framerate, jerkiness will appear depending on the fps/speed ratio of the moving objects and is
• ACID

  3 answers, most recent on 3/12/2019

  RE: Acid Pro 7, Where Are the Loops??
  I got Acid Pro 7 from a previous HumbleBundle. I don't recall exactly what I did, but I ended up with Loops under: C:\Documents\ACID Loops In the following subfolders: ACID ROCK - LFA                                     Downtempo
• Other products

  No answers, created on 2/26/2019

  Knocking the dust off the daw after 6 years
  It has been 6 years so It took a few days to get the main recording daw up and running. It is a PC running XP Pro and has never updated or had an internet connection. The battery on the mother board was dead giving a USB over power error and it
• Samplitude

  No answers, created on 1/21/2019

  Samplitude Music studio 2 mastering presets
  hi need some help after finishing my project I can master manually ie stereo, Eq and so on but for a quick way to master if I use any of the preset mastering options ie 70’s 80’s rock and so on after processing there is an unwanted distortion noise
• ACID

  6 answers, most recent on 1/15/2019

  RE: VSTi problem in Pro 8
  Update. I found the missing files and the Drum Engine folder. I copied and pasted them into the MxSynth directory you mentioned above. The missing files pop ups are now gone. So, that's good. I'm still not able to get any sound though. I can't click
• ACID

  6 answers, most recent on 1/15/2019

  RE: VSTi problem in Pro 8
  Thanks for the reply. I reinstalled all loops and instruments. Now, when I open Rock Drums, the missing file window doesn't pop up, but I can't click on any of the drums or the little keyboard at the bottom. I tried inserting various other soft
• ACID

  6 answers, most recent on 1/15/2019

  RE: VSTi problem in Pro 8
  No sound comes out because those are the samples(audio files) the instrument needs to play the drum sounds. It's weird that the instrument loads but you have no sounds. Check this first. look in C:\Users\Public\Public
• ACID

  6 answers, most recent on 1/15/2019

  VSTi problem in Pro 8
  When I try to load the Vita Rock Drums soft synth, I get an error message that the following file is not found. YT-MX SD 01 OH 01 XC#1 Y02. I hit ignore, and it keeps popping the same message with slightly different file names, for example Y01,
• Movie Studio

  10 answers, most recent on 12/28/2018

  RE: Incomplete removal of borders when using Magix stabilization module
  @abolibibelot2 Hi . . . . in my experience, Mercalli v2 sucks. I can not obtain what I want, which is to correct a high frequency jerkiness . . . Thanks for the video clips - I installed the Lagarith codec and tested the stabilisation with Mercalli
• ACID

  2 answers, most recent on 12/5/2018

  Vita Drum Problem
  When I open the Vita Rock Drums soft synth, I get an error message that the following file is missing. YT-MX SD 01 OH 01 XC#1 Y02. Help!
• Video Pro X

  53 answers, most recent on 12/20/2018

  RE: [Feedback] How do you like version 16.0.2.304 ?
  Sorry to say, but I am bit concerned the direction Magix Video Pro X is heading. I have faced several application crashes recently on quite basic stuff like adding title texts, importing media from memory card etc. Unstable program impacts
• Other products

  6 answers, most recent on 3/7/2019

  .Still can not download
  I still can not download 2 of my soundpools Dark Metal and Pure Rock. I have been trying for a few months now all my others work fine I have Terabytes of memory at my disposal. When i download either of these it shows 100% in my menu but They are
• Music Maker

  No answers, created on 10/23/2018

  Error in Pop Rock Broken Promises sound loop
  Hello there...What is going wrong by my program - when i try to play or using "Guitar solo A" or "Guitar solo B" in accord "a", and only this accord - by using the sound poll Pop Rock Broken Promise, i then only get noise, like snow on old
• ACID

  4 answers, most recent on 10/23/2018

  RE: Drum maps
  Thanks for the reply .I can't remember the version number but when I did a manual check for updates after fully installing and it reported no updates were available. But I WILL check later. Just to clarify. You are saying that when you load (say)
• Music Maker

  21 answers, most recent on 3/5/2021

  RE: Soundpools Issues
  Hi, I'm not sure of what you are doing. Please watch the first part of this tutorial about Soundpools. This will show you where the Soundpools are supposed to be located and you can go searching for them. Reinstalling MMM has nothing to do with
• Video Pro X

  12 answers, most recent on 8/7/2018

  RE: Output Volume Level question
  @discburn, @browj2 Hi Seamus, John In VPX I too normalise to EBU R128. I used to have the issue with TV being very loud accepting the default audio levels after normalising, I spoke to a music/record producer friend and he recommended for DVD, BD or
• ACID

  7 answers, most recent on 8/9/2018

  RE: Acid Pro 8 and KONTAKT 5
  I have to admit I don't use Kontakt very much within AP8, but anytime I do, it works just fine. I have only 64-bit versions of everything though ... no 32-bit AP8 installed and no 32-bit VSTs at all, and on Windows 10 -- I don't know if that makes a
• ACID

  4 answers, most recent on 8/1/2018

  [Closed] I love Sony Corporation. But why the name Magix?
  I love Sony Corporation. But why the name Magix? Acid Planet was so right. For some of us it is against our religion to have anything to do with Magic, because there is no future in it and a few other Prophecies. Also, I was wondering if you guys
• Off topic

  4 answers, most recent on 5/27/2020

  [Closed] Looking for a career
  I wear many hats. Musician, writer, manager, photographer, marketing agent, audio engineer, and many more. I want to see what's out there! If anyone has some advice, wisdom to impart, job offers, or just wants to show me a good time and ply me with
• Music Maker

  One answer, on 8/1/2018

  HELP - Cannot activate previously purchased ADD-ON Instruments ! ! !
  Hi, I just upgraded to Music Maker Premium Edition (2019) I've had no problem updating and activating all the stuff that came as standard in previous editions of Music Maker - that went as smooth as silk. The issue I have is with seven additional
• ACID

  65 answers, most recent on 9/18/2023

  RE: [Closed] So where are the "9 GB of new ACIDized loops"?
  Anyone care to post a list (even a rough idea) of what is included in the "9 GB of new ACIDized loops?". Would be a big part of the purchase decision for me. ThX!!!! @kinvermark - I believe the packs are from producerplanet, here's a link to their
• Other products

  3 answers, most recent on 7/12/2018

  RE: Soundpool 1-8
  Hi again, Depends on what exactly you're after. If you're looking for individual loop names, I'm afraid there's no such list that I have access to. I did manage to grab a little table of contents off an internal document, which details the soundpool
• Music Maker

  8 answers, most recent on 7/13/2018

  RE: License of Sound Loops , Premium Instruments , Independence Library
  No! The Independence Library has no songs, loops, Soundpools, only the sound that an instrument makes. You create the music using the instruments. There is no other license required. You cannot give away the instrument sounds by themselves, that is
• Samplitude

  One answer, on 7/6/2018

  Applying controllers in the MIDI controller editor
  Hi, I've created a drum beat in Samplitude Music Maker using the Vita Rock Drums instrument using the MIDI editor. Now, I'd like to change the reverb over one bar. In the controller slot 3, I've selected 91: Reverb, and I use the Free Hand drawing