• Video Pro X

  29 answers, most recent on 9/13/2025

  Kodak C330 audio
  I need to rotate a video recorded from a Kodak C330 compact digital camera. This is an older camera with the video file as MOV format with 320*240 pixel resolution, 20 FPS, and 11.025 kHz audio sampling. The original audiovideo plays fine with VLC
• Xara Designer Pro

  10 answers, most recent on 3/31/2023

  RE: [Solved] Editing Bitmaps - Outside software
  @Kelley-Kuhlman I don't have XDP but I do have and use Affinity Photo, versions 1 and 2. I'm not certain this will be helpful to you, therefore, but which installer version of Affinity Photo 2 do you have? The original release used an
• Movie Studio

  4 answers, most recent on 6/27/2025

  RE: Trying to sync some audio
  @Matthew-Mannix To summarise: -You cannot "split" a video or audio frame in Magix Movie Studio. You can in Magix VPX. -Increasing the movie's frame rate will allow closer matching/syncing. For example, if you double the movie frame rate (key E) you
• Video Pro X

  5 answers, most recent on 9/3/2023

  RE: [Solved] Very bad quality on imported video
  @skarvika Hi, can you share some info first, 👍 After some experimentation, I may have found the source of the issue actually. Seems like it's not an issue on my end, but rather that whatever codec was used on the original file was not one that Video
• Movie Studio

  22 answers, most recent on 10/11/2025

  RE: Serial Number Problem with Video Deluxe2026 Trial
  @GeeGee Hi . . . . Are you saying that if I'm importing 1920 x 1080 original clips, my GPU still won't cope with the process satisfactorily? . . . . All processing will be done by the Intel Core i5 8400 processor, and depending on what effects eg
• SOUND FORGE

  18 answers, most recent on 11/9/2025

  RE: Support Is Non-Existant
  @Rod-Devonshire Your post to this thread has been hidden since you have already created a thread with your question. Please do not create duplicate posts. Please continue any discussion in your original thread. Just for information: it is very
• Off topic

  One answer, on 5/27/2023

  RE: [Solved] Vegas Pro 20
  @Barry-Reitman5894 The problem is very likely that you registered Vegas 20 to a different customer account and a e-mail address (maybe a typo or you forgot the original account?) You can still download the installer from here by entering your serial
• Movie Studio

  41 answers, most recent on 2/6/2025

  RE: How to fix or smooth de-interlaced content?
  @jak.willis Jak, could you put one of the episodes up on a hosting site such as Google Drive or Dropbox so we can take a look/experiment. You could try exporting your shows as MPEG, which will re-interlace the files and hopefully smooth out the
• SOUND FORGE

  20 answers, most recent on 5/23/2024

  RE: Issue with Sound Forge Pro 16 and scripting
  Thanks for the reply. I was mistaken. I was working with the wrong script folder. Your original method works with SF18. I have my scripts working correctly now. Your approach was and is a stroke of genius.
• SOUND FORGE

  5 answers, most recent on 4/7/2025

  RE: Voice to speech suddenly stopped working
  Okay a couple of things. First, despite it saying I had over 120,000 characters left I opted to but the small pack of additional characters. When I applied them, it worked . Second, in my profile it says I have two active subscriptions for SF 18 pro
• Other products

  7 answers, most recent on 3/15/2024

  RE: Export Photos and Video without Videoshow
  Thanks for response. I opened the Album, I selected photos, tried copy and paste but did not work. Drag and drop to new folder location did. However, it actually took my photos from my original location and moved them to the new location. As for the
• Video Pro X

  44 answers, most recent on 2/4/2025

  RE: Problem with exported DVD
  @emmrecs Hi Jeff Assuming that the project settings were the defaults SD APL 25 fps 4:3 and the burn setting were also the default PAL settings, then I cannot replicate this, played in VLC and PowerDVD 22, no jitter or ghosting. Can you post the
• Movie Studio

  23 answers, most recent on 10/9/2024

  RE: HDR not supported in Movie studio 2025?
  Hoi Rob😉, Maybe its a platinum feature, to have those Luts visible from the GUI. But it could also be that we have to refresh or enable something within Moviestudio...who knows..   You solution works fine for me. Btw do you know how to revert back
• Audio Cleaning Lab

  14 answers, most recent on 3/4/2025

  saving to MPEG 4
  i need to save my edited video files to MPEG 4 i can't save to mpeg 4 from my cleaning lab 4 but i can using my older cleaning lab 2014 premium! magix told me my save titles were too long but even reducing the titles to one word "test" it does not
• Movie Studio

  4 answers, most recent on 1/25/2025

  RE: Introduction - new guy
  I found a 16MM 27-minute film in a shop in Paris, France, a few years ago (online).  Purchased it and had it shipped to me, then digitized.  I gave the original film to the Periscope guys for preservation.  I am currently out of the country, but I
• Movie Studio

  4 answers, most recent on 1/25/2025

  RE: Introduction - new guy
  @BarryT, @emmrecs Hi . . . . maybe colorize a 1948 B&W movie . . . . Movie Studio 2025 has an AI Colorize feature for doing this. From testing I have done it works best with good quality still images. For video the effects results will vary
• MAGIX

  34 answers, most recent on 3/31/2026

  RE: New "owners/developers" of Sequoia, Samplitude and Music Studio.
  @emmrecs Hi, I had started off a reply with my thoughts and disappointments on all of this but I'll just reply to your last post. The link to the "new'" forum is in the email that has a big button link to Join the Boris FX Community. It has my email
• Off topic

  5 answers, most recent on 1/26/2025

  RE: Copyright, Producing with Soundpool Loops
  @brian-johnson It's your song. Sounds like you transformed the loops a lot and therefore you have exceeded a certain threshold of originality. It's only important that you cannot add this song to Content ID databases. Uploading songs with loops
• Movie Studio

  29 answers, most recent on 2/12/2024

  RE: Glow/Luminance on white shirts (VHS-MP4)
  @Rickvv What is the size of the original MP4 file? If it's that 643MB file above (you did the Mediainfo report for), could you host the complete file on Google Drive. I'll then take pieces of it over to VH and see what can be done. It has to be the
• Video Pro X

  25 answers, most recent on 10/24/2024

  RE: Working with GoPro Timelapses
  @Brian-Obvilion Hi . . . . In a nutshell, I need a high quality video format I can create from all these jpg images encoded in yuv442p preserving the original image data as much as possible - that video pro x16 can actually import correctly.  . . .
• Movie Studio

  89 answers, most recent on 5/5/2025

  RE: Upon importing my photos, they turn to black and white or all black
  @CubeAce Try this link. https://hevc-video-extensions-from-device-manufacturer.en.uptodown.com/windows/download The actual download link is at the bottom of the page. I got it from Ken Berry who is one of the Moderators at the Paint Shop Pro/ Video
• Other products

  4 answers, most recent on 1/10/2023

  RE: [Solved] Forum messages in OTHER THAN ENGLISH LANGUAGE
  @thorsak Hi. It's possible to write in any language on any country of origin forum, so no it's not possible. It's also just as easy to right click any page and use Google Translate. Ray.  
• Movie Studio

  24 answers, most recent on 9/20/2025

  RE: Inserting a clip on the timeline
  @Esther-Rodriguez Welcome to the Magix users forums. First, can you specify exactly which Magix program and version you have, please? See the Help>About menu when the program is open. Second, assuming the program is either Movie Studio (from
• Movie Studio

  7 answers, most recent on 6/7/2025

  RE: Zooms
  @DRORENGEL u can see how it turned out here and see why the zooom come back out? Yes. I suspect you're using one of the presets and not manually setting up the zoom because what's happening is you're zooming in but then it's immediately going back