• Music Maker

  2 answers, most recent on 1/3/2022

  RE: [Solved] Draw an audio level curve?
  @gjonny Hi What you are looking for is Automation - this is available on the right click of an audio object, you need to display the Volume curve as in previous versions of Music Maker. John EBForum Moderator
• SOUND FORGE

  8 answers, most recent on 12/13/2021

  RE: [Solved] Recording streaming audio from a radio station
  Record-what-you-hear... On many soundcards, like the Realtec, one needs to increase the Stereo mix (properties) input level under the recording tab, If that is maxed out, increase the 'speaker/headphone' (output) volume which also affectrs record
• Music Maker

  3 answers, most recent on 11/28/2021

  RE: [Solved] Need Clarification:MusicMaker Free,Live Sets may be used commercially?
  My initial query can be summarized in two things1. Commercial use of included sound pool and additional purchased soundpool.2. Commercial use of the contents from Live Pads and live sets feature. I also sent a similar question to MAGIX support and I
• SOUND FORGE

  3 answers, most recent on 11/24/2021

  [Solved] technical problems with soundforge 15 pro. keyboard, cursor, level
  I used soundforge 11 pro now over 10 years, just a few days upgraded to soundforge 15 pro. I have the following issues: Soundleves don't display, the sound plays, but I don't see a cursor. Shortcut keys don't work. In the popup windows, for instance
• Music Maker

  4 answers, most recent on 10/26/2021

  [Solved] VST Plug-ins wind instruments breath control
  I am using an AKAI EWI USB for midi controller. In the supplied Aria software for EWI I can control breath attack to put more emotion into my music. Unfortunately the supplied Ewi patches are not the best. I have purchased Brass, flute, cello vst
• Samplitude

  7 answers, most recent on 8/20/2021

  RE: [Solved] Cant seem to figure out how to get started with this program
  @Dopamine Maybe the following tips will help. In your screenshot HyperX Cloud Revolver S is not activated. And you can change the monitoring mode to Mixer FX Monitoring / Hybrid Engine (the screenshots below are from Samplitude Pro X in case you
• ACID

  2 answers, most recent on 7/16/2021

  RE: [Solved] DIstortion/clipping in recording preview mode.
  Thanks @sheppo I'm going to try recording to an internal drive and see if that speeds things up. I was actually able to trace the issue to applying a vst plugin to the master volume. Doing this should be an issue since you should be able to apply
• Samplitude

  2 answers, most recent on 7/12/2021

  RE: [Solved] Volume faders / sliders don't change the volume of some tracks.
  @Kevin-Hartman Make a right click on the fader and select that it controls the audio volume. Does this help?
• Samplitude

  2 answers, most recent on 7/12/2021

  [Solved] Volume faders / sliders don't change the volume of some tracks.
  Magix Samplitude Build 16, 64 bit. Windows 10.The volume faders don't change the volume on some of my tracks.I have a softsynth vst plugin (Spire) on one track and Loopcloud drums (drum machine plugin) on another and the volume won't change when I
• Music Maker

  5 answers, most recent on 8/12/2021

  [Solved] Where is the Video preview in Music Maker 2022?
  I purchased and installed Music Maker 64 Bit, Version 30.0.0.11 earlier this evening. I'm trying to locate the video preview screen, which used to "always" be right next to the volume slider. I'm clicking all over the place looking for it, and I
• Photostory

  3 answers, most recent on 5/23/2021

  RE: [Solved] Decreasing volume from audio and then increasing it
  @Haim-Kichel Hi The feature you need to use is the Volume curve - you must be working in Timeline mode - right click the music track and select the option from the popup. You will see a green line appear on the music object, to duck the music you
• Photostory

  3 answers, most recent on 5/23/2021

  [Solved] Decreasing volume from audio and then increasing it
  Hi. I am trying to include a video during a montage. I am looking a way to decrease the volume of the song playing in the background while the video is playing and bring it back up after the video is over (basically fade it out for a while and fade
• SOUND FORGE

  8 answers, most recent on 4/20/2021

  [Solved] Sound Gap recording
  I am getting a delayed sound through my headphones from what I am speaking into the microphone. I have never had this problem with Audacity nor with the earlier version of Sound Forge used to record 2 other audiobooks. The recording itself is fine,
• Audio Cleaning Lab

  One answer, on 3/26/2021

  [Solved] Default to "cut" mode?
  Hello - I have Audio Cleaning Lab 3 running on a PC. Somehow the software has defaulted to the "cut" mode - every time I position the cursor over the waveform, the scissors icon appears and I am only able to insert a cut in the object -- I can't,
• ACID

  2 answers, most recent on 4/1/2021

  [Solved] Moving events and tempo markers
  Is there any way I could move everything (events, tempo markers, fx automation settings, etc...)?I have a quite complex mix with lots of tracks and all sorts of fx automation events, tempo changes, volume and panning envelopes, etc., and I need to
• SOUND FORGE

  5 answers, most recent on 3/9/2021

  RE: [Solved] Volume envelope process selection
  Does anyone know if this functionality has returned to SF15? It works the same as in SF Pro 11, 12, 13 and 14: "Insert> Volume envelope" or the keyboard shortcut (V). The volume 'envelope' never was an option to apply destructively in 'Fx
• Samplitude

  6 answers, most recent on 3/10/2021

  [Solved] Guitar Effects Not Working
  Hi, I am hoping that someone might be able to help me with my strange problem. I have recently had to reinstall my Windows 10 Desktop computer due to a major issue with Windows Updates. I have a Magix Subscription for both Samplitude Music Studio
• SOUND FORGE

  2 answers, most recent on 2/23/2021

  [Solved] Reverberation
  When I press the record button, it immediately sails along reverberating and increasing in volume, and it has nothing to do with what is playing? In the past, I was able to record with no problem and there as been no changes to the computer?
• ACID

  5 answers, most recent on 2/19/2021

  [Solved] Acid Pro 10: Volume Envelopes on MIDI tracks are inconsistent
  I'm currently working on a track with a hefty pile of MIDI tracks. I'm trying to master the entire piece, and I have noticed that dropping a volume envelope on a MIDI track does not have predictable results. Sometimes it works way too well,
• ACID

  25 answers, most recent on 3/1/2021

  [Solved] Newbie: How do I get Acid Sound Pro to sound from my computer speakers
  I bought Acido Pro 10 and can't get the sound from the “Brass Invader” demo session to reach my laptop speakers. The channels of the audio console mark signal, but the master does not mark volume. My three sound devices are: Microsoft Sound Mapper,
• SOUND FORGE

  7 answers, most recent on 1/7/2023

  RE: [Solved] SF Pro 14 error code - device not available...partial solution found
  I have to turn down off my monitors totally while recording. I am not sure what you mean by turning off the monitors @BScott-Fischer. Does that mean powering them down or turning down the volume in the PC or disabling them in the PC? This may help
• SOUND FORGE

  6 answers, most recent on 11/12/2020

  RE: [Solved] Volume Adjust Automatized
  One word: compressor/limiter (or is that two). A manually drawn volume envelope ahead of a comp/limiter is recommended, as is EQ when needed. RMS normalizing in SF Pro can help, but it is very difficult to find a 'perfect' setting. There are also
• SOUND FORGE

  6 answers, most recent on 11/12/2020

  [Solved] Volume Adjust Automatized
  Good Morning ! I made a recording with a microphone. On the street, using a portable recorder. For various reasons, there are times when the sound gets too loud, and there are times when it gets too low. Passing the recording to the computer, I
• ACID

  16 answers, most recent on 6/25/2024

  [Solved] Acid Pro 10 can't install Microsoft Visual C++ 2013(x64)- won't update
  So, ever since the latest update for Acid was pushed out, I've been having issues applying it. Each time I try, I get this error: I'm on Windows 10 1909 x64. I just got this laptop a month ago, it's all updated. Beyond the error message, even if I