• Samplitude

  One answer, on 3/6/2026

  RE: MIDI fade velocity / volume
  @gpcode2014 There are a lot of ways to do it. You first need to map MIDI CC 7 to the volume control inside the Vita Instruments. Make a right click on the volume control knob and select curve 7. If you don't want to use MIDI but want the DAW to
• SOUND FORGE

  11 answers, most recent on 5/26/2025

  RE: [Solved] Volume automation - Sound Forge 18 Pro
  @Paul-Fegan I tested it in SF 18 and you are correct. This is a bug in newer SF versions. Please change the EffectOptions at the end of line 37 from file.DoEffect("Volume", "Reduce Volume -8 dB", new SfAudioSelection(wnd.Selection.ccStart,
• Samplitude

  5 answers, most recent on 4/1/2025

  RE: [Solved] problem with volume control for virtual instruments
  @psychojosh13 If you right click on the volume slider in the track header, is it set to volume mode or velocity mode? Besides that, is the volume knob turned to 0 if you play from the beginning of the project or also from every other position? You
• Movie Studio

  11 answers, most recent on 5/2/2026

  RE: MEP 2016 Plus - Trying To Copy Media Onto New Project
  @CarpentersMate, @AAProds Hi Mike, Al . . . . The green line is the volume curve; hide it by right-clicking on the audio object and unticking "Volume curve". . . . . Close Al, that is the correct procedure for the Volume curve on a single audio
• SOUND FORGE

  11 answers, most recent on 5/26/2025

  [Solved] Volume automation - Sound Forge 18 Pro
  Is it possible to tie automation to a hotkey? I want to be able to select a breath-intake in voiceover audio, then press a key to lower the volume by, say, -8 dB. In REAPER, I can do this via user-defined actions, but I don't see a way to do it in
• Samplitude

  5 answers, most recent on 4/1/2025

  [Solved] problem with volume control for virtual instruments
  Samplitude Music Studio 2023, running on Windows 11. I've run into this problem a couple of times now in my current project - if I use the track volume slider to lower the volume on a track with a virtual instrument, even just by a little bit, the
• SOUND FORGE

  4 answers, most recent on 6/3/2025

  RE: Can SF play continuously as you edit?
  In SF, the 'events' have a gain setting as well to attenuate events' volume individually in addition to the timeline volume, graphic fade and volume envelope plug-in..
• Audio Cleaning Lab

  4 answers, most recent on 10/31/2025

  RE: Cleaning reel to reel tapes
  Thank you rraud, I did try volume adjustments but that didn't improve the dullness just increased the volume. I'm not very good with using EQ in this situation but I will give it a go. I can always go back if it doesn't work out.
• Samplitude

  7 answers, most recent on 11/18/2024

  [Solved] Samplitude just stopped freezing volume automation and effects plugins
  Hello, I am using Samplitude Music Studio version 2021 on Windows and have also downloaded a trial of X8 Pro Suite. Usually when I freeze MIDI to Audio I do some additional EQ and volume automation on the audio track and then re-freeze.  When I do
• SOUND FORGE

  4 answers, most recent on 9/20/2025

  [Solved] Soundforge Pro 18 automatically changing the sound of my files
  Please help! I've been using old versions of Soundforge for many years (up to Soundforge 11) to record DJ mixes and convert cassette mixtapes to mp3. Absolutely love the product and it's always done everything I wanted and more. I recently purchased
• Samplitude

  5 answers, most recent on 4/1/2025

  RE: problem with volume control for virtual instruments
  Thank you! I didn't even realize that right-clicking on the track volume slider did anything, but sure enough it brought up several options. "MIDI Volume (CC 7)" was the one currently selected, so I changed it to "Track Volume" and then I was able
• SOUND FORGE

  11 answers, most recent on 5/26/2025

  RE: Volume automation - Sound Forge 18 Pro
  Hi @Paul-Fegan, You can draw a volume envelope, however envelope points cannot be added automatically (like in Vegas). . To initiate the volume envelope plug-in, press the 'V' key. If you wish to save the volume envelope and continue later, save as
• Audio Cleaning Lab

  4 answers, most recent on 10/31/2025

  RE: Cleaning reel to reel tapes
  Volume and normalizing will usually not resolve a 'dull' sound. If can post a sample file, we could better recommend a procedure.
• Audio Cleaning Lab

  4 answers, most recent on 10/31/2025

  RE: Cleaning reel to reel tapes
  You can try EQ, volume adjustments and the ACL restoration tools. I am not sure about ACL, but with SF Pro, you can automate most plug-ins' parameters. The volume automation (envelope) is relatively easy to adjust. EQ and other Fx can be more
• Samplitude

  One answer, on 3/6/2026

  MIDI fade velocity / volume
  Hi- I've drawn a fade in the MIDI editor, but the volume (in blue) does not change in the mix..what might I be missing? It is with Vita Orchestral Strings in Magix Samplitude Music Studio build 36 / 64 bit Win10Processor    Intel(R) Core(TM)
• SOUND FORGE

  5 answers, most recent on 3/31/2025

  RE: How to record live PC stream (what you hear) using Sound Forge Pro 11?
  There is no way to view the record volume meter without opening 'Record Options' With 'Record Options' open, check the record volume before recording in SF "Transport> Arm" mode (aka, record ready) prior initiating 'record'.If recording 'What you
• SOUND FORGE

  11 answers, most recent on 5/26/2025

  RE: Volume automation - Sound Forge 18 Pro
  @Paul-Fegan This script calls a preset named Reduce Volume -8 dB in the Volume effect and applies it to a selection. If you save this in a text file with the file ending cs to your Sound Forge script folder and rescan the folder you can add a
• SOUND FORGE

  13 answers, most recent on 12/23/2025

  RE: Sound Forge Pro 18 - can't change bit depth to 32
  Yes I do. When I select either of the 32 bit options in that pulldown, the volume of my wav file goes to 100% (see lower screen capture above containing large block of blue).
• Samplitude

  40 answers, most recent on 4/15/2025

  RE: Real Time Varispeed Sound Quality in Samp & WhichSound Forge Version?
  No, still no sound output. The level meters in the transport and volume control windows show input from the WAV file, but the message near the volume control knob still says "Monitor inactive. Assign first output device for monitoring."
• SOUND FORGE

  3 answers, most recent on 5/21/2025

  RE: Normalize not available for a plug-in chain
  Hi @dbarton, Normalize is available in 'Batch Converter' but it's under the 'Volume' header. so choose 'Volume' as the effect, then select 'Normalize' below it.I am not aware of a third-party peak normalize plug-in that does not effect the dynamics.
• ACID

  2 answers, most recent on 2/11/2024

  [Solved] Volume envelope (cc7) does not work on VSTi tracks.
  It pains me to ask this, but has anyone experienced the volume envelope not affecting the actual volume level on a VSTi instrument track? If the VSTi instrument is receiving midi note data from Acid, why would it ignore basic volume control change
• Music Maker

  4 answers, most recent on 3/10/2025

  Arranger Volume Indicator
  Hello, MMM 2025 is having trouble displaying the volume indicator. It is intermittent at best. Thanks for looking into this it is a bitch trying to read the tracks without the help from them.
• SOUND FORGE

  11 answers, most recent on 5/26/2025

  RE: Volume automation - Sound Forge 18 Pro
  Hi SP, wow, this is exactly what I was hoping for. However, I'm having trouble with it. Here's what I've done: 1) copied exactly what's in the grey box above into a TXT file and renamed that as a .CS file 2) added it to SF's scripts folder 3)
• SOUND FORGE

  One answer, on 1/15/2026

  VU monitoring of record levels while muting monitoring of recording
  I record audio in Sound Forge 17 using an XLR mic connected to a Focusrite preamp. I recently upgraded from a much older Windows 7 PC and was using a much older version (6.0b) of Sound Forge.In the older version of Sound Forge, I could easily choose