• Video Pro X

  32 answers, most recent on 12/5/2023

  RE: Canon C-LOG3 files won't open on Video Pro X 15.05.213(UPD3)
  @JussiK, @CubeAce Hi From the MediaInfo data:- . . . . Chroma subsampling      : 4:2:2 . . . . I suspect that the Chroma sampling being as above is causing the issue, as @AAProds has requested, a sample file would help. I do not have any HEVC 4:2:2
• Samplitude

  5 answers, most recent on 6/19/2024

  RE: Kontakt 7 causing Samplitude Pro X8 to freeze
  @Fhatuwani-Netshifhefhe Have you tried to increase the sample buffer size in the ASIO control panel? You can also change the settings in the Performance options inside the Samplitude system options. Maybe it will run more stable. That is usually
• ACID

  5 answers, most recent on 11/20/2024

  Acid Pro Pops and Clicks
  Hi, I am in the process of finishing a project in Acid Pro, however, when I render the tracks to any type of file, I hear pops, cracks, and dropouts in the audio. I use Roland Quad Capture, reverted back to Sound Mapper and the sound issues are the
• ACID

  No answers, created on 10/24/2023

  Serato Sample 2 won't accept MIDI in ACID
  Serato's new Sample 2 plugin won't accept MIDI notes from the piano roll or MIDI controllers. It makes sound if I hit the pads in the plugin's interface. Hope this gets fixed since ACID's stems got removed.
• Samplitude

  One answer, on 3/13/2024

  I have just signed up for Magix on a free version how do I use it
  I just signed up and cannot find how to access the program is there an app or what do I do xx Im trying to make samples from my own recordings
• SOUND FORGE

  11 answers, most recent on 4/14/2024

  RE: Can't open sound forge
  OK, I found the settings you referred to; and the http section was not checked. They now match your samples; I restarted my HP Envy laptop, but alas, the same SF "no connection" message. Thanks anyway for trying... I suppose I'll do the
• Video Pro X

  2 answers, most recent on 11/17/2022

  RE: [Solved] Edit friendly codecs
  @Zkuggi Hi . . . . I've tried ProRES, DNxHD, DNxHR and GoPRO Cineform but it looks like VPX cannot read any of that by default. . . . What do you do to edit this kind of footage? . . . . Install Quicktime (QT). With QT installed you can import into
• SOUND FORGE

  11 answers, most recent on 5/10/2025

  RE: SF 18 Pro Trial Crashing
  @ItsMeTho What audio device driver is selected in the program preferences? You can check the Windows Reliability Monitor for crash descriptions. You can press the Windows key and R on your keyboard to open the Run window. Type perfmon /rel and
• SOUND FORGE

  10 answers, most recent on 11/15/2023

  RE: Not getting any sound levels from my DJ hardware (XDJ-XZ) input.
  I will try this tomorrow, I am clueless when it comes to sample rates & what they should be etc, so thanks for the suggestion. I know my bit depth was set to 32 bit & sample rate was 44100 Hz. So I will try changing both to those you
• Movie Studio

  No answers, created on 7/29/2024

  movie studio 2025 suite - AI voice has started me on a new project
  since installing software i have messed about with the AI where you can get voice from txt etc can i achieve what i want below and has anyone tried this my wife died in 2013.. she was 52 and daughter 11 at time daughter now 22 and i was wondering if
• Movie Studio

  13 answers, most recent on 3/4/2024

  RE: No Audio after import
  @Igor_Krayushkin I think the problem may be this line of the MediaInfo data: Sampling rate                            : 44.1 kHz If your MS project is set for 48kHz Audio Sampling rate I have encountered situations where files with 44.1kHz audio do
• Other products

  5 answers, most recent on 9/30/2025

  RE: Independence Pro 3.5
  I still think that there is an issue with HP computers as it has been mentioned here and elsewhere. When I was in contact with Florian at support I went through every iteration to load the samples and removing the software etc…. His suggestion was
• Samplitude

  10 answers, most recent on 6/20/2024

  RE: Sampliude music studio x8 stability
  @j-s Acid 7 is a 32 Bit software with a lot lower system requirements. What audio interface are you using for Music Studio X8? Select the ASIO driver for the audio interface or the Magix Low Latency driver in the program settings. Increase the
• Music Maker

  12 answers, most recent on 3/8/2024

  RE: Terms and conditions for royalty-free commercial license
  I don't know anything about Content ID. Could you explain. I'm the copyrighted owner of the music am I not? I purchased commercial licenses allowing me the use of loops and samples in the compositions I create, royalty-free.. What would they be
• Music Maker

  4 answers, most recent on 11/18/2024

  RE: is the license permanent ?
  @Muhammad-Habibullah Some additional information: Included loops are always non-commercial. You can use them fine for private stuff but you cannot release anything which generates income for you. For this, you need to acquire additional commercial
• ACID

  19 answers, most recent on 10/30/2024

  RE: 24 bit and 32 bit WAV files vs. ACID
  Maybe I should have to increase the sample rate? Link
• SOUND FORGE

  2 answers, most recent on 12/28/2022

  RE: [Solved] Stuck at 44.1
  Seasons Greetings and welcome to the Magix Sound Forge users community @Justin-F. If I understand correctly, you would like all new files to record at 48kHz without having to change it from 44.1kHz each time a new file is recorded?That can be
• Music Maker

  7 answers, most recent on 2/5/2024

  RE: Audio Recording Error
  @Riley-Coach Please click on the gear icon next to the record button to open the recording settings. Change the path where the records are saved to a different path, if the standard path doesn't work. Make also sure you have selected the microphone
• SOUND FORGE

  12 answers, most recent on 3/27/2024

  RE: [Solved] SoundForge 17.0.2 crackling
  I can provide you with a sample.. about 200kbyte.. but I'm on the road now and able to send in about 10h.
• Music Maker

  One answer, on 3/22/2024

  RE: Why???
  @Tad-Aldrich Navigate to File > Settings > Program Settings > Audio/MIDI. Here select an ASIO driver, for example the Music Maker ASIO driver. Then click on the Advanced button to open the driver settings. Select your audio input and audio
• Music Maker

  16 answers, most recent on 2/18/2024

  RE: MM2019 Prem unable to log into store
  After patching MMM still same problems ,then realised I have to set samples to 44.1 on my audio card whenever I use MMM, been this way since 2016.Seems ok now , W10 i53570k ,hd4000 , 16gb
• SOUND FORGE

  13 answers, most recent on 11/1/2023

  RE: Device is not available.
  @Xeoneex Can you please the bit depth and sample rate settings of your What U Hear device? Right click on the speaker icon in the bottom right side of the Windows taskbar. Then click on Sounds. Go to the recording tab and make a right click on What
• Music Maker

  3 answers, most recent on 2/11/2024

  RE: How to sort the soundpool?
  You can add such features in future updates and the program will connect to the producerplanet to download the data. It would be convenient to use demonstration samples for testing. I think many users would appreciate this feature. The program
• Movie Studio

  80 answers, most recent on 2/12/2024

  RE: no audio for mov files
  @sksoon  Is it possible a codec issue? Yes, it is possible but first, can you check what is the Audio Sampling Rate of one of your .mov files? Movie Studio will almost certainly expect this to be 48kHz and if your files are not recorded at this